Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Cavex ColorChange
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- CS50-P0G4-000Q-0KT4
Identified Uses
For dental purposes.
Manufacturers & Suppliers
Cavex Holland B.V.
manufacturer
Fustweg 5, 2031 CJ Haarlem, The Netherlands
+31 23 530 7700
http://www.cavex.nl
Emergency Contacts
Emergency Contact
+31 23 530 - 7700
During normal opening times
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| calcium sulfate dihydrate | 10101-41-4 | 2.5 - 10% | No |
| Talc (Mg3H2(SiO3)4) EC: 238-877-9 | 14807-96-6 | 2.5 - 10% | No |
| dipotassium hexafluorotitanate EC: 240-969-9 | 16919-27-0 | 1 - 2.5% | Yes |
| magnesium oxide EC: 215-171-9 | 1309-48-4 | 2.5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Not required.
Do not allow to enter sewers/ surface or ground water.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
No special requirements.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Not required.
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
No further relevant information available.
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties.
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Cavex ColorChange?
The signal word is no signal word.
What is the physical form of Cavex ColorChange?
Cavex ColorChange is a solid with whitish color. It has pleasant odor.
What is Cavex ColorChange used for?
For dental purposes.
What is the melting point of Cavex ColorChange?
The melting point is Undetermined. and the boiling point is Undetermined..