Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 0102 Colortricx Clear Gold
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Colorants for industrial use
Manufacturers & Suppliers
Powertex International
manufacturer
Strombeeksesteenweg 205, B 1800 Vilvoorde /Koningslo
+3223106090
Emergency Contacts
Emergency Contact
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mica group minerals, metal oxides
First Aid Measures
Emergency procedures for chemical exposure incidents
If difficulties occur after dust has been inhaled, remove to fresh air and seek medical attention.
Wash thoroughly with soap and water.
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth and then drink plenty of water.
Immediate Medical Attention
If difficulties occur after dust has been inhaled, seek medical attention.
Medical Treatment
Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
dry powder, foam
carbon dioxide
No particular hazards known.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For small amounts: Pick up with suitable appliance and dispose of.
For large amounts: Pick up with suitable appliance and dispose of.
Do not empty into drains.
Pick up with suitable appliance and dispose of.
Related Products
Similar products with comparable safety profiles
D11013X CHROMATINT YELLOW 0963
---
Colorstream® T10-03 Tropic Sunrise
---
CGS 8525 all colors
---
CGS 8508 all colors
UFI: T250-T04N-N00U-P6X4
Colorex : colours 11, 12
UFI: R9E0-H085-P00T-HQD1
Colorstream® T10-02 Arctic Fire
---
Colorstream® T10-04 Lapis Sunlight
---
002511-, 002512- • ThermoClean DC (colorless & blue)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Breathing must be protected when large quantities are decanted without local exhaust ventilation. Avoid contact with the skin, eyes and clothing.
The product in undamaged packing need not be stored separately. Further information on storage conditions: No special precautions necessary.
Avoid contact with the skin, eyes and clothing.
No special precautions necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant protective gloves (EN 374) Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types.
Safety glasses with side-shields (frame goggles) (e.g. EN 166)
Suitable respiratory protection for lower concentrations or short-term effect: Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)
Due to the colouring properties of the product closed work clothes should be used, to avoid stains during manipulation.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable.
No hazardous reactions if stored and handled as prescribed/indicated. Corrosion to metals: No corrosive effect on metal.
No hazardous reactions when stored and handled according to instructions.
Avoid dust formation. Avoid deposition of dust. See MSDS section 7 - Handling and storage.
No substances known that should be avoided.
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil (and other compartments if available)
Results of PBT and vPvB assessment
12.6 Other adverse effects
The inhibition of the degradation activity of activated sludge is not anticipated when introduced to biological treatment plants in appropriate low concentrations.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be disposed of or incinerated in accordance with local regulations.
Must be disposed of or incinerated in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Chemical Safety Assessment not yet performed due to registration timelines
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 0102 Colortricx Clear Gold?
The signal word is no signal word.
What is the physical form of 0102 Colortricx Clear Gold?
0102 Colortricx Clear Gold is a solid with yellow color. It has odourless odor.
What is 0102 Colortricx Clear Gold used for?
Colorants for industrial use
What is the melting point of 0102 Colortricx Clear Gold?
The melting point is The substance / product decomposes. and the boiling point is not applicable.