Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Burnt Plate Oil #000
- Synonyms
- Burnt Plate Oil #2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
To modify working properties of artist printmaking inks
Manufacturers & Suppliers
Gamblin Artists Colors
manufacturer
323 SE Division Pl. Portland, OR 97202 USA
503-235-1945
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Linseed Oil with non-hazardous additives
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Symptoms: Breathing difficulty, Coughing, Dizziness
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Symptoms: Slight irritant effect on skin and mucous membranes
Remove contact lenses if worn. Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
Symptoms: Slight irritant effect on eyes
Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.
Symptoms: Nausea in case of ingestion, Gastric or intestinal disorders when ingested
Immediate Medical Attention
Call for medical help immediately.
Medical Treatment
If swallowed, gastric irrigation with added, activated carbon.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam; Fire-extinguishing powder; Carbon dioxide; Gaseous extinguishing agents
Water spray - Water with full jet
Risk of ignition. Rags and other materials containing this product may heat and spontaneously ignite, if exposed to air. Formation of toxic gases is possible during heating or in case of fire.
Cool closed containers exposed to fire with water spray.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unprotected persons away. Ensure adequate ventilation.
Do not allow to enter sewers or groundwater. Prevent from spreading (e.g. by damming-in or oil barriers).
Absorb with non-combustible liquid-binding material. Pick up mechanically.
Materials: sand, diatomite, acid binders, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent formation of aerosols. Use only in well ventilated areas. Keep containers tightly sealed. Rags, metal wools / cuttings / shavings and waste papers soaked with product must be placed in a sealed metal container rated for flammable waste.
Store in cool, dry conditions in well sealed containers. Avoid prolonged contact with air/oxygen. Avoid storage near extreme heat, ignition sources or open flame.
Protect from heat. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Oxidizes rapidly and exothermically if large surface area is present. May spontaneously combust under certain conditions.
Reacts with aldehydes. Reacts violently with oxidizing agents. Reacts with peroxides and other radical forming substances. Reacts with powdered metals. Reacts with strong acids and alkali. Toxic fumes may be released if heated above the decomposition point.
Store away from oxidizing agents. Keep ignition sources away - Do not smoke.
Carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Can be burned with household garbage after consulting with the pertinent authorities and adhering to all the applicable regulations.
Contact waste processors for recycling information.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Burnt Plate Oil #000 known by?
Burnt Plate Oil #000 is also known as: Burnt Plate Oil #2
What is the hazard signal word for Burnt Plate Oil #000?
The signal word is no signal word.
What is the physical form of Burnt Plate Oil #000?
Burnt Plate Oil #000 is a liquid appearing as clear with amber color. It has slight vegetable oil odor.
What is Burnt Plate Oil #000 used for?
To modify working properties of artist printmaking inks
What is the melting point of Burnt Plate Oil #000?
The melting point is N/D and the boiling point is Decomposes before boiling.