Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WILFARIN MA-1498 / MA-1499
Regulatory Identifiers
- CAS Number
- 544-63-8 Check regulations →
- EC Number
- 208-875-2 Check regulations →
Identified Uses
Industrial use
Uses advised against
No data available.
Manufacturers & Suppliers
WILMAR Europe Trading B.V.
global supplier
Central Post – Entrance West, 7th floor, Delftseplein 27G, NL-3013 AA Rotterdam
+31-10-2178800
Emergency Contacts
Giftinformationszentrum Nord
+49 (0)551 192 40
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| myristic acid, pure EC: 208-875-2 | 544-63-8 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove affected person from the immediate area. Ensure supply of fresh air.
Wash off immediately with soap and water.
Separate eyelids, wash the eyes thoroughly with water (15 min.).
Call a doctor immediately. Never give anything by mouth to an unconscious person.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam; Dry chemical extinguisher; Carbon dioxide; Water spray jet
No data available.
In the event of fire, the following can be released: Carbon dioxide (CO2); Carbon monoxide (CO)
Cool endangered containers with water spray jet.
Firefighter Protection
Use self-contained breathing apparatus. Wear protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Refer to protective measures listed in sections 7 and 8. Ensure adequate ventilation. For emergency responders: No data available.
Do not discharge into the drains/surface waters/groundwater. Do not discharge into the subsoil/soil.
Contain and collect spillage
Materials: non-combustible absorbent materials, e.g. sand, earth, vermiculite, diatomaceous earth
Related Products
Similar products with comparable safety profiles
WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB)
CAS: 143-07-7
WILFARIN LA1299 / WILFARIN LA1299 RSPO (MB), liquid
CAS: 143-07-7
WILFARIN OA-7075; Wilfarin OA7070
CAS: 67701-08-0
WILMARIN ME1098 / Wilmarin ME1099
CAS: 110-42-9
FARMIN DM 4098
CAS: 112-75-4
RAFINOL 930 FF
CAS: 70131-50-9
JEFFAMINE® EDR 148
CAS: 929-59-9
FAMACRIL P 140
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Product inherent handling risks must be minimised taking the appropriate measures for protection and preventive actions. The working process should be designed to rule out the release of hazardous substances or skin contact as far it is possible by the state of the art.
Keep container tightly closed and dry in a cool, well-ventilated place. Containers which are opened must be carefully closed and kept upright to prevent leakage.
Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Wash hands before breaks and after work. Do not inhale vapours. Use barrier skin cream. Avoid contact with eyes.
Keep away from sources of heat and ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Before use, the protective gloves should be tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility and antistatic properties). Adhere to the manufacturer's instructions and information relating to the use, storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves. Protective gloves (EN 455). Appropriate Material: nitrile
Safety glasses with side protection shield (EN 166)
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must be worn. In case of aerosol and mist formation, take appropriate measures for breathing protection in the event workplace threshold values are not specified.
Normal chemical work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available.
No data available.
No data available.
None, if handled according to intended use.
Oxidizing agents
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.7 Other information
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.
Allocation of a waste code number, according to the European Waste Catalogue, should be carried out in agreement with the regional waste disposal company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is not subject to REACH Annex XIV, SVHC listing, REACH Annex XVII restrictions, or Seveso III major-accident hazard regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WILFARIN MA-1498 / MA-1499?
The signal word is no signal word.
What is the physical form of WILFARIN MA-1498 / MA-1499?
WILFARIN MA-1498 / MA-1499 is a liquid with white color. It has musty; fatty-like odor.
What is WILFARIN MA-1498 / MA-1499 used for?
Industrial use
What is the melting point of WILFARIN MA-1498 / MA-1499?
The melting point is > 54 °C and the boiling point is > 250 °C.