Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Parasilico VP
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Professional use
Uses advised against
No additional information available
Manufacturers & Suppliers
DL CHEMICALS N.V.
manufacturer
Roteri Istraat 201-203, B-8793 Waregem, Belgium
http://www.dl-chem.com
Emergency Contacts
Emergency Contact
+ 32 56 62 70 51
Only available during office hours.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Benzene, C14-30-alkyl derivs EC: 272-472-8 | 68855-24-3 | 2.5 - 5% | Yes |
| Titanium dioxide (Note W)(Note 10) EC: 236-675-5 | 13463-67-7 | 2.5% | Yes |
| REACT.PR.PDMS/N-(3-(TRIMETHOXYSILYL)PROPYL)CYCLOHEXANAMINE | 119299-06-8 | 1 - 2.5% | Yes |
| trimethoxyvinylsilane EC: 220-449-8 | 2768-02-7 | 0.5 - 1% | Yes |
| 3-(2-aminoethylamino)propyltrimethoxysilane EC: 217-164-6 | 1760-24-3 | 0.5 - 1% | Yes |
| 3-aminopropyltriethoxysilane EC: 213-048-4 | 919-30-2 | 0.1 - 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Allow affected person to breathe fresh air. Allow the victim to rest.
Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.
Wash skin with mild soap and water. Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Symptoms: Not expected to present a significant skin hazard under anticipated conditions of normal use.
If eye irritation persists: Get medical advice/attention. Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.
Symptoms: Not expected to present a significant eye contact hazard under anticipated conditions of normal use.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Symptoms: Not expected to present a significant ingestion hazard under anticipated conditions of normal use.
Immediate Medical Attention
Obtain emergency medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All extinguishing media allowed. Foam. Dry powder. Carbon dioxide. Water spray. Sand.
None known. Do not use a heavy water stream.
No fire hazard.
Cool down the containers exposed to heat with a water spray. Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Wear a self contained breathing apparatus. Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Avoid release to the environment.
Cover spill with non combustible material, e.g.: sand, earth, vermiculite. Take up mechanically (sweeping, shovelling) and collect in suitable container for disposal. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Materials: sand, earth, vermiculite, clay, diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.
Store tightly closed in a dry and cool place. Keep only in the original container in a cool, well ventilated place away from : Keep container closed when not in use.
Handle in accordance with good industrial hygiene and safety procedures. Take off immediately all contaminated clothing and wash it before reuse. Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Time of penetration is to be checked with the glove producer. Please follow the instructions related to the permeability and the penetration time provided by the manufacturer. Gloves must be replaced after each use and whenever signs of wear or perforation appear. Wear protective gloves. Type: Disposable gloves, Material: Nitrile rubber (NBR), Thickness: > 0,1 mm, Standard: EN ISO 374
Chemical goggles or safety glasses. Type: Safety glasses, Characteristics: With side shields, Standard: EN 166
Ensure there is adequate ventilation. No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation. Wear appropriate mask
No special clothing/skin protection equipment is recommended under normal conditions of use
Avoid contact with skin and eyes.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperature and under normal conditions of use. Not established.
None under normal use.
None under normal use. Not established.
None under normal use. Direct sunlight. Extremely high or low temperatures.
Strong acids. Strong bases.
Additional hazards when processed. release of (highly) toxic gases/vapours. Methanol. fume. Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Parasilico VP?
The signal word is no signal word.
What is the physical form of Parasilico VP?
Parasilico VP is a liquid appearing as pasty. with according to product specification. color. It has characteristic. odor.
What is the solubility of Parasilico VP?
Water: Insoluble
What is Parasilico VP used for?
Professional use
What is the melting point of Parasilico VP?
The melting point is Not applicable and the boiling point is Not applicable.