Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Synthomer™ NX 800
- Chemical Name
- 1-isopropyl-2,2-dimethyltrimethylene diisobutyrate
Regulatory Identifiers
- CAS Number
- 6846-50-0 Check regulations →
- EC Number
- 229-934-9 Check regulations →
- REACH No.
- 01-2119451093-47-XXXX
Identified Uses
Formulation & (re)packing of substances and mixtures Formulation & (re)packing of substances and mixtures – Distribution and Storage Industrial use - Sealants Industrial use - Construction and Formulation Additives Industrial use - Coatings and Inks Industrial use - Plasticizer Professional use - Sealants Professional use - Coatings and Inks Professional use - Construction and Formulation Additives Professional use - Plasticizer Professional use - Laboratory use Consumer use - Sealants Consumer use - Coatings and Inks Consumer use - Cosmetics, personal care products Consumer use - Construction Formulation Consumer use - Plasticizer
Uses advised against
None known.
Manufacturers & Suppliers
Synthomer Trading Limited
manufacturer
45 Pall Mall, London. UK. SW1Y 5JG.
+44 (0)1279 436211
Emergency Contacts
Emergency Contact
+44 (0) 1235 239 670
24 hour(s)
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-isopropyl-2,2-dimethyltrimethylene diisobutyrate EC: 229-934-9 | 6846-50-0 | 99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing.
IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Wash with plenty of water. If irritation (redness, rash, blistering) develops, get medical attention.
Symptoms: If irritation (redness, rash, blistering) develops
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
Rinse mouth. Obtain medical attention if symptoms appear or if large quantities have been ingested.
Immediate Medical Attention
If irritation (redness, rash, blistering) develops, get medical attention. If eye irritation persists, get medical advice/attention. Obtain medical attention if symptoms appear or if large quantities have been ingested.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
As appropriate for surrounding fire.
Direct water jet may spread the fire.
Product is not classified as flammable, but will burn on contact with flame or exposure to high temperature.
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Fire fighters should wear complete protective clothing including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Caution - spillages may be slippery. Ensure operatives are trained to minimise exposures. Ensure suitable personal protection during removal of spillages. Shut off leaks if without risk. Avoid all contact with substance. Avoid exposure during pregnancy.
Allow small spillages to evaporate provided there is adequate ventilation.
Avoid release to the environment.
Transfer to a container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure operatives are trained to minimise exposures. Ensure adequate ventilation. Avoid inhalation of high concentrations of vapours. In case of inadequate ventilation wear respiratory protection. Avoid all contact with substance. Do not ingest. Wear protective gloves/eye protection. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Avoid exposure during pregnancy.
Keep container tightly closed. Store in a cool/low-temperature, well-ventilated (dry) place away from heat and ignition sources. Keep cool. Protect from sunlight.
Do not eat, drink or smoke when using this product. Wash hands before breaks and after work.
Store away from heat and ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation. Store in a cool/low-temperature, well-ventilated (dry) place away from heat and ignition sources.
Wear impervious gloves (EN374). Gloves should be changed regularly to avoid permeation problems. Breakthrough time of the glove material: refer to the information provided by the gloves' producer. Protective index 6, corresponding > 480 minutes of permeation time according to EN 374. Recommended: Nitrile rubber (Minimum thickness 0.11mm)
Wear goggles giving complete protection to eyes to protect against liquid splashes (EN166).
In case of inadequate ventilation wear respiratory protection. The use of a high efficiency filter (EN143) is recommended.
Wear suitable coveralls to prevent exposure to the skin.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
None anticipated. Hazardous polymerisation will not occur.
contact with flame or exposure to high temperature
Strong oxidising agents.
None anticipated. Combustion may cause toxic fumes. (Carbon monoxide, Carbon dioxide).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and VPVB assessment
The substance is not classified as PBT or vPvB.
12.6 Other adverse effects
None known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not allow to enter drains, sewers or watercourses.
Dispose of this material and its container as hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Synthomer™ NX 800?
The signal word is warning.
What is the physical form of Synthomer™ NX 800?
Synthomer™ NX 800 is a liquid appearing as colourless liquid with colourless color. It has slight odor.
What is Synthomer™ NX 800 used for?
Formulation & (re)packing of substances and mixtures Formulation & (re)packing of substances and mixtures – Distribution and Storage Industrial use - Sealants Industrial use - Construction and Formulation Additives Industrial use - Coatings and Inks Industrial use - Plasticizer Professional use - Sealants Professional use - Coatings and Inks Professional use - Construction and Formulation Additives Professional use - Plasticizer Professional use - Laboratory use Consumer use - Sealants Consumer use - Coatings and Inks Consumer use - Cosmetics, personal care products Consumer use - Construction Formulation Consumer use - Plasticizer
What are the hazard statements for Synthomer™ NX 800?
This substance has 2 hazard statements:
- H361: Suspected of damaging fertility or the unborn child.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Synthomer™ NX 800?
The melting point is -70 °C and the boiling point is 281 °C.