PXL 7016M

Remove the person affected from the area of exposure, provide clean air and keep at rest. Request medical attention if symptoms persist.

Clean the affected area thoroughly with water and neutral soap.

Symptoms: May cause an allergic skin reaction. Changes on the skin (stinging, redness, rashes, blisters).

Rinse eyes thoroughly with lukewarm water for at least 15 minutes. Do not allow the person affected to rub or close their eyes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, in which case this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the product.

Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion.

If possible use polyvalent powder fire extinguishers (ABC powder), alternatively use foam or carbon dioxide extinguishers (CO₂).

IT IS RECOMMENDED NOT to use full jet water as an extinguishing agent.

As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk.

Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures.

Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those without protection.

Avoid at all cost any type of spillage into an aqueous medium.

Absorb the spillage using sand or inert absorbent and move it to a safe place.

Materials: sand or inert absorbent

Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and dispose of using safe methods (section 6).

Avoid sources of heat, radiation, static electricity and contact with food.

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Avoid the evaporation of the product as it contains flammable substances, which could form flammable vapour/air mixtures in the presence of sources of ignition. Control sources of ignition (mobile phones, sparks,...) and transfer at slow speeds to avoid the creation of electrostatic charges.

Protective gloves against minor risks (Material: Nitrile, Breakthrough time: > 60 min, Thickness: 0.1 mm, Conditions of use: Normal). Replace gloves in case of any sign of damage. For prolonged periods of exposure to the product for professional users/industrials, we recommend using CE III gloves in line with standards EN ISO 21420:2020 and EN ISO 374-1:2016+A1:2018. As the product is a mixture of several substances, the resistance of the glove material can not be calculated in advance with total reliability and has therefore to be checked prior to the application.

Panoramic glasses against splash/projections. EN 166:2002 EN ISO 4007:2018. Clean daily and disinfect periodically according to the manufacturer’s instructions. Use if there is a risk of splashing.

Filter mask for gases and vapours (Filter type: A2), EN 405:2002+A1:2010. Replace when there is a taste or smell of the contaminant inside the face mask. If the contaminant comes with warnings it is recommended to use isolation equipment.

Work clothing: Replace before any evidence of deterioration. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 6529:2013, EN ISO 6530:2005, EN ISO 13688:2013, EN 464:1994. Anti-slip work shoes: EN ISO 20347:2012. Replace before any evidence of deterioration. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 20345:2012 y EN 13832-1:2007.

In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container.

Chemically stable under the indicated conditions of storage, handling and use.

No hazardous reactions are expected because the product is stable under recommended storage conditions.

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Increase in temperature: Precaution, Sunlight: Precaution

Strong acids, oxidising materials (avoid direct impact), alkalis or strong bases

Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO₂), carbon monoxide and other organic compounds.

Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex 2 (Directive 2008/98/EC).

Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex 2 (Directive 2008/98/EC).