NextSDS Logo
Safety Data Sheet EN

GLYCERINE 4843

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
GLYCERINE 4843
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use, Professional use wide dispersive use

Uses advised against

No additional information available

Manufacturers & Suppliers

OLEON N.V. logo

OLEON N.V.

manufacturer

Assenedestraat 2, 9940 Ertvelde - Belgium

+32 9 341 10 11

http://www.oleon.com

Emergency Contacts

SGS ERS

+32 3 575 55 55

SGS ERS

+1 888 765 6554

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Glycerol (Main constituent) EC: 200-289-5 56-81-5 85% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.

Symptoms: Coughing. ON HEATING: Irritation of the respiratory tract. Irritation of the nasal mucous membranes.

Skin contact

Rinse with water. Soap may be used. Take victim to a doctor if irritation persists.

Eye contact

Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing. Take victim to an ophthalmologist if irritation persists.

Symptoms: Slight irritation.

Ingestion

Rinse mouth with water. Immediately after ingestion: give lots of water to drink. Call Poison Information Centre (www.who.int/ipcs/poisons/centre/directory/en). Consult a doctor/medical service if you feel unwell. Ingestion of large quantities: immediately to hospital.

Symptoms: Nausea. Vomiting. Diarrhoea. AFTER INGESTION OF HIGH QUANTITIES: Headache. Dehydration. Disturbances of heart rate. Change in the haemogramme/blood composition. Decreased renal function.

Immediate Medical Attention

Depending on the victim's condition: doctor/hospital. Ingestion of large quantities: immediately to hospital.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Specific hazards

DIRECT FIRE HAZARD: Combustible. INDIRECT FIRE HAZARD: Temperature above flashpoint: higher fire/explosion hazard.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Mark the danger area. Exposure to heat: have neighbourhood close doors and windows. Exposure to fire/heat: consider evacuation. Wash contaminated clothes.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handling temperature : ≥ 10 °C above melting point

Storage

Keep container in a well-ventilated place. Store at ambient temperature. Keep out of direct sunlight. Meet the legal requirements.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Gloves. Materials for protective clothing: GIVE GOOD RESISTANCE: natural rubber. neoprene. PVC. viton. GIVE LESS RESISTANCE: styrene-butadiene rubber. GIVE POOR RESISTANCE: polyurethane

Eyes

Safety glasses.

Respiratory

Mist formation: aerosol mask with filter type P1. On heating: gas mask with filter type A.

Skin/Body

Protective clothing. Materials for protective clothing: GIVE GOOD RESISTANCE: natural rubber. neoprene. PVC. viton. GIVE LESS RESISTANCE: styrene-butadiene rubber. GIVE POOR RESISTANCE: polyurethane

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid.
Colour
Colourless to light yellow.
Colour Intensity
---
Form
Syrupy
Odor
Odourless.
Odor Threshold
No data available
Ph
6 - 7,5 (10% in water)
Melting Point
< 0 °C
Boiling Point
No data available
Flash Point
No supplementary information available
Freezing Point
No data available
Softening Point
< 20 °C
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
No data available
Evaporation Rate
No data available
Vapor Pressure
No supplementary information available
Vapor Density
---
Relative Density
1,26 (20 °C)
Bulk Density
---
Density
ca. 1249 kg/m³ (40°C) : ca. 1209 kg/m³ (100°C)
Flammability
No data available
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No supplementary information available
Decomposition Temperature
No data available
Solubility
Soluble in water. Soluble in ethanol. Soluble in acetone. Soluble in ethylacetate. Insoluble in oils/fats.
Partition Coefficient
-1,75 (Experimental value, Equivalent or similar to OECD 107, 25 °C)
Solubility In Water
Soluble in water
Solubility In Fat
Insoluble in oils/fats
Molecular Weight
---
Voc Content
< 1 % (1999/13/EC; 2004/42/EC; 2010/75/EU; SR 814.018)
Metal Corrosion
---
Dynamic Viscosity
ca. 109 mPa·s (20°C)
Kinematic Viscosity
ca. 87,27 mm²/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Hygroscopic.

Reactivity

Decomposes on exposure to temperature rise: release of toxic/corrosive/combustible gases/vapours (acrolein). Reacts violently with (strong) oxidizers: (increased) risk of fire/explosion. Reacts with (some) acids: (increased) risk of fire/explosion.

Hazardous reactions

May polymerize on exposure to temperature rise.

Avoid

temperature rise

Incompatible

(strong) oxidizers, (some) acids

Decomposition

toxic/corrosive/combustible gases/vapours (acrolein), CO, CO2

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Ecology - general : No supplementary information available. Ecology - air : TA-Luft Klasse 5.2.5. Ecology - water : Mild water pollutant (surface water) Not harmful to fishes (LC50(96h) >1000 mg/l) Not harmful to aquatic organisms (EC50 >1000 mg/l) Not harmful to algae Not harmful to bacteria Bioaccumulation: not applicable Sludge digestion is inhibited at >1000 mg/l 50% Readily biodegradable in water (OECD 301D: 82%; 20 days) Acute aquatic toxicity : Not classified Chronic aquatic toxicity : Not classified

12.2 Persistence and degradability

Readily biodegradable in water (OECD 301D: 82%; 20 days)

12.3 Bioaccumulative potential

Bioaccumulation: not applicable

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

LC50 fish 1: 54000 mg/l (96 h, SALMO GAIRDNERI/ ONCORHYNCHUS MYKISS); LC50 fish 2: > 1000 mg/l (96 h, PISCES); LC50 other aquatic organisms 1: > 1000 mg/l (96 h); EC50 Daphnia 2: > 10000 mg/l (24 h, DAPHNIA MAGNA, LOCOMOTOR EFFECT); EC50 other aquatic organisms 1: > 1000 mg/l (BACTERIA, ACTIVATED SLUDGE); TLM fish 1: > 1000 ppm (96 h, PISCES); TLM other aquatic organisms 1: > 1000 ppm (96 h); Threshold limit other aquatic organisms 1: 2900 mg/l (192 h, MICROCYSTIS AERUGINOSA, TOXICITY TEST); Threshold limit other aquatic organisms 2: > 10000 mg/l (16 h, PSEUDOMONAS PUTIDA, TOXICITY TEST); Threshold limit algae 1: > 10000 mg/l (168 h, SCENEDESMUS QUADRICAUDA, TOXICITY TEST)

12.2 Persistence and degradability

Not provided

12.3 Bioaccumulative potential

Not provided

12.4 Mobility in soil

Not provided

12.5 Results of PBT and vPvB assessment

Not provided

12.6 Endocrine disrupting properties

Not provided

12.7 Other adverse effects

Not provided

12.1 Toxicity

LC50 fish 1: 54000 mg/l (96 h, SALMO GAIRDNERI/ ONCORHYNCHUS MYKISS) LC50 fish 2: > 1000 mg/l (96 h, PISCES) LC50 other aquatic organisms 1: > 1000 mg/l (96 h) EC50 Daphnia 2: > 10000 mg/l (24 h, DAPHNIA MAGNA, LOCOMOTOR EFFECT) EC50 other aquatic organisms 1: > 1000 mg/l (BACTERIA, ACTIVATED SLUDGE)

12.1 Toxicity

| TLM fish 1 | > 1000 ppm (96 h, PISCES) | | --- | --- | | TLM other aquatic organisms 1 | > 1000 ppm (96 h) | | Threshold limit other aquatic organisms 1 | 2900 mg/l (192 h, MICROCYSTIS AERUGINOSA, TOXICITY TEST) | | Threshold limit other aquatic organisms 2 | > 10000 mg/l (16 h, PSEUDOMONAS PUTIDA, TOXICITY TEST) | | Threshold limit algae 1 | > 10000 mg/l (168 h, SCENEDESMUS QUADRICAUDA, TOXICITY TEST) |

12.2. Persistence and degradability

GLYCERINE 4843 | Biochemical oxygen demand (BOD) | 0,87 g O2/g substance | | --- | --- | | Chemical oxygen demand (COD) | 1,16 g O2/g substance (ISO 15705) | | ThOD | 1,217 g O2/g substance | | BOD (% of ThOD) | 71 % ThOD |

12.2. Persistence and degradability

Glycerol (56-81-5) | Biochemical oxygen demand (BOD) | 0,87 g O2/g substance | | --- | --- | | Chemical oxygen demand (COD) | 1,16 g O2/g substance (ISO 15705) | | ThOD | 1,217 g O2/g substance | | BOD (% of ThOD) | 71 % ThOD |

12.3. Bioaccumulative potential

GLYCERINE 4843 | Log Pow | -1,75 (Experimental value, Equivalent or similar to OECD 107, 25 °C) |

12.3. Bioaccumulative potential

### Glycerol (56-81-5) | Log Pow | -1,75 (Experimental value, Equivalent or similar to OECD 107, 25 °C) |

12.4. Mobility in soil

### GLYCERINE 4843 | Surface tension | 0,063 N/m (20°C) | | --- | --- | | Ecology - soil | Biodegradability in soil: no data available. | ### Glycerol (56-81-5) | Surface tension | 0,063 N/m (20°C) | | --- | --- | | Ecology - soil | Biodegradability in soil: no data available. |

12.5. Results of PBT and vPvB assessment

No additional information available

No additional information available

12.6. Other adverse effects

No additional information available

No additional information available

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Take up liquid spill into absorbent material, e.g.: sand, earth, vermiculite, or kieselguhr, powdered limestone, Scoop absorbed substance into closing containers, See "Material-handling" for suitable container materials, Wash down leftovers with plenty of water, Wash clothing and equipment after handling

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Safety, health and environmental regulations/legislation specific for the substance or mixture

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for GLYCERINE 4843?

The signal word is no signal word.

What is the physical form of GLYCERINE 4843?

GLYCERINE 4843 is a liquid appearing as liquid. with colourless to light yellow. color. It has odourless. odor.

What is the solubility of GLYCERINE 4843?

Soluble in water. Soluble in ethanol. Soluble in acetone. Soluble in ethylacetate. Insoluble in oils/fats.

What is GLYCERINE 4843 used for?

Industrial use, Professional use wide dispersive use

What is the melting point of GLYCERINE 4843?

The melting point is < 0 °C and the boiling point is No data available.