Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MERPOXEN SFS 300
Regulatory Identifiers
- CAS Number
- 9004-99-3 Check regulations →
Identified Uses
Emulsifier
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Wall Chemie GmbH
manufacturer
Am Selder 25 D-47906 KEMPEN DEUTSCHLAND
+49 2152 8999 0
Emergency Contacts
Emergency Contact
+49 2152 8999 0
Giftinformationszentrum Nord
+49 551 19240
24h-Auskunft
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical characterisation: Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Stearic acid polyglycolester | 9004-99-3 | --- | No |
Polymers are exempted from REACH-regulation.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water.
Seek medical treatment. Rinse mouth. Do not induce vomiting.
Immediate Medical Attention
Risk of aspiration.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
In case of fire, the following can be released: Organic decomposition products, Carbon oxides (COx)
Firefighter Protection
Use suitable breathing apparatus if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Particular danger of slipping on leaked/spilled product.
Do not allow to enter sewers/ surface or ground water.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Open and handle receptacle with care. Wear protective clothing. Do not eat, drink or smoke in working area.
Store only in the original receptacle.
Do not eat, drink or smoke in working area.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. Material of gloves: e.g. Nitrile rubber, NBR. Recommended thickness of the material: ≥ 0,5 mm. Penetration time of glove material: Minimum breakthrough time: > 120 min (Permeation according to EN 374 Part 3: level 4)
Tightly sealed goggles (EN 166).
Not required.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Product is stable under normal ambient conditions.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Can be burned with household garbage after consulting with the waste disposal facility operator and the pertinent authorities and adhering to the necessary technical regulations.
Can be burned with household garbage after consulting with the waste disposal facility operator and the pertinent authorities and adhering to the necessary technical regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This Product is classified as not dangerous for the purpose of the relevant directives and therefore does not require labelling. Nevertheless we recommend to be careful with the material as you used to be with other chemicals.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MERPOXEN SFS 300?
The signal word is no signal word.
What is the physical form of MERPOXEN SFS 300?
MERPOXEN SFS 300 is a solid appearing as white, beige with white, beige color. It has characteristic odor.
What is MERPOXEN SFS 300 used for?
Emulsifier
What is the melting point of MERPOXEN SFS 300?
The melting point is 40 °C and the boiling point is Undetermined..