NextSDS Logo
Safety Data Sheet EN

EPO-TEK® 302-3M-R PMF SYRINGE

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
EPO-TEK® 302-3M-R PMF SYRINGE
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

adhesives adhesives

Uses advised against

Not to be used for any purpose other than the one the product was designed for

Manufacturers & Suppliers

Epoxy Technology, Inc. logo

Epoxy Technology, Inc.

manufacturer

14 Fortune Drive, Billerica, MA, 01821, USA

978-667-3805

http://www.epotek.com

Emergency Contacts

ChemTel

+1 (800) 255-3924

ChemTel

+1 (813) 248-0585

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1C H314
Eye Dam. Cat. 1 H318
Skin Sens. Cat. 1 H317
Aquatic Acute Cat. 2 H401
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H314 Causes severe skin burns and eye damage
H317 May cause an allergic skin reaction
H318 Causes serious eye damage
H401 Toxic to aquatic life
H411 Toxic to aquatic life with long lasting effects

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 Wash hands, forearms and face thoroughly after handling.
P272 Contaminated work clothing must not be allowed out of the workplace.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P330 + P331 If swallowed: rinse mouth. Do NOT induce vomiting.
P302 + P352 If on skin: Wash with plenty of water.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a poison center or doctor.
P321 Specific treatment (see supplemental first aid instruction on this label).
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P363 Wash contaminated clothing before reuse.
P391 Collect spillage.
P405 Store locked up.
P501 Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Epoxy phenol novolac resin 9003-36-5 60% Yes
Polyoxypropylenediamine 9046-10-0 10 - 30% Yes
Substituted imidazole --- 1 - 5% Yes

Notes

Components not listed are either non-hazardous or are below reportable limits.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Skin contact

Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Call a physician immediately.

Symptoms: Burns. May cause an allergic skin reaction.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately.

Symptoms: Serious damage to eyes.

Ingestion

Rinse mouth. Do not induce vomiting. Call a physician immediately.

Symptoms: Burns.

Immediate Medical Attention

Call a physician immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Dry powder. Foam. Carbon dioxide.

Specific hazards

Toxic fumes may be released.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate spillage area. Avoid contact with skin and eyes. Do not breathe dust/fume/gas/mist/vapors/spray.

Environmental

Avoid release to the environment.

Cleanup methods

Take up liquid spill into absorbent material.

—

Related Products

Similar products with comparable safety profiles

E

EPO-TEK® 302-3M-R PART A

---

E

EPO-TEK® 302-3M PART A

---

E

EPO-TEK 920 Part A

---

E

EPO-TEK® 920 Part A

---

E

EPO-TEK® H77T Part B

---

E

EPO-TEK® H77 Black Part A

---

M

MERPOXEN SFS 300

CAS: 9004-99-3

E

EPOFIX RESIN

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation of the work station. Avoid contact with skin and eyes. Do not breathe dust/fume/gas/mist/vapors/spray. Wear personal protective equipment.

Storage

Store locked up. Store in a well-ventilated place. Keep cool.

Hygiene

Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation of the work station.

Hands

Wear suitable gloves resistant to chemical penetration. Neoprene or nitrile rubber gloves. Butyl-rubber protective gloves. Choosing the proper glove is a decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer. Refer to manufacturer's information. Gloves must be replaced after each use and whenever signs of wear or perforation appear

Eyes

Safety glasses

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment

Skin/Body

Wear suitable protective clothing

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
light yellow
Colour Intensity
---
Form
---
Odor
Mild odor
Odor Threshold
No data available
Ph
No data available
Melting Point
Not applicable
Boiling Point
No data available
Flash Point
No data available
Freezing Point
No data available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
No data available
Evaporation Rate
---
Vapor Pressure
No data available
Vapor Density
---
Relative Density
No data available
Bulk Density
---
Density
---
Flammability
Not applicable.
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
No data available
Partition Coefficient
No data available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

The product is non-reactive under normal conditions of use, storage and transport.

Hazardous reactions

No dangerous reactions known under normal conditions of use.

Avoid

None under recommended storage and handling conditions (see section 7).

Incompatible

No additional information available

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Ecology - general : Toxic to aquatic life. Toxic to aquatic life with long lasting effects.

12.1. Toxicity

LC50 - Fish [1] 1.9 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Brachydanio rerio, Semi-static system, Fresh water, Weight of evidence) EC50 - Crustacea [1] 3.5 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static system, Fresh water, Weight of evidence, GLP) LC50 - Fish [2] 1000 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) LOEC (chronic) 1 mg/l Test organisms (species): Daphnia magna Duration: '21 d' NOEC (chronic) 0.3 mg/l Test organisms (species): Daphnia magna Duration: '21 d'

12.1. Toxicity

| Polyoxypropylenediamine (9046-10-0) | | | LC50 - Fish [1] | 772.14 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Cyprinodon variegatus, Static system, Salt water, Experimental value, GLP) | | EC50 - Crustacea [1] | 80 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static system, Fresh water, Experimental value, GLP) | | ErC50 algae | 15 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh water, Experimental value, GLP) |

12.2. Persistence and degradability

Not readily biodegradable in water.

12.2. Persistence and degradability

Not readily biodegradable in water.

The substance is not readily biodegradable in water.

12.3. Bioaccumulative potential

| Epoxy phenol novolac resin (9003-36-5) | | | --- | --- | | BCF - Fish [1] | 150 (Pisces, QSAR) | | Partition coefficient n-octanol/water (Log Pow) | 2.7 – 3.6 (Experimental value, OECD 117: Partition Coefficient (n-octanol/water), HPLC method) | | Bioaccumulative potential | Low potential for bioaccumulation (BCF < 500). |

Low potential for bioaccumulation (BCF < 500).

12.3. Bioaccumulative potential

| Polyoxypropylenediamine (9046-10-0) | | | Partition coefficient n-octanol/water (Log Pow) | 1.34 (Experimental value, OECD 117: Partition Coefficient (n-octanol/water), HPLC method, 25 °C) | | Bioaccumulative potential | Low potential for bioaccumulation (Log Kow < 4). |

Low potential for bioaccumulation (Log Kow < 4).

12.4. Mobility in soil

12.4. Mobility in soil | Epoxy phenol novolac resin (9003-36-5) | | | --- | --- | | Organic Carbon Normalized Adsorption Coefficient (Log Koc) | 3.65 (log Koc, OECD 121: Estimation of the Adsorption Coefficient (Koc) on Soil and on Sewage Sludge using High Performance Liquid Chromatography (HPLC), Experimental value) | | Ecology - soil | Low potential for mobility in soil. | | Polyoxypropylenediamine (9046-10-0) | | | Surface tension | Data waiving | | Ecology - soil | No (test)data on mobility of the substance available. |

12.5. Other adverse effects

No additional information available
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of contents/container in accordance with licensed collector's sorting instructions.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2735
Shipping Name
Amines, liquid, corrosive, n.o.s. (Polyoxypropylenediamine, 1H-Imidazole-1-ethanol, .alpha.-methyl-)
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

All components of this product are present and listed as Active on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for EPO-TEK® 302-3M-R PMF SYRINGE?

The signal word is danger.

What is the physical form of EPO-TEK® 302-3M-R PMF SYRINGE?

EPO-TEK® 302-3M-R PMF SYRINGE is a liquid with light yellow color. It has mild odor odor.

What is the solubility of EPO-TEK® 302-3M-R PMF SYRINGE?

No data available

What is EPO-TEK® 302-3M-R PMF SYRINGE used for?

adhesives adhesives

What are the hazard statements for EPO-TEK® 302-3M-R PMF SYRINGE?

This substance has 5 hazard statements:

  • H314: Causes severe skin burns and eye damage
  • H317: May cause an allergic skin reaction
  • H318: Causes serious eye damage
  • H401: Toxic to aquatic life
  • H411: Toxic to aquatic life with long lasting effects

What is the melting point of EPO-TEK® 302-3M-R PMF SYRINGE?

The melting point is Not applicable and the boiling point is No data available.