NextSDS Logo
Safety Data Sheet EN

HiTEC® 66000 Fuel Additive

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HiTEC® 66000 Fuel Additive
Product Code
H66000

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Petrochemical industry: Fuel additive.

Manufacturers & Suppliers

A

Afton Chemical Asia Pte. Ltd.

manufacturer

103 Penang Road, #09-01 Visioncrest Commercial, Singapore 238467

+65 6732 0822

A

Afton Chemical (Suzhou) Co., Ltd.

manufacturer

No. 26 Pingsheng Road, Suzhou Industrial Park, Suzhou, 215126 China

+86-512-62605099

A

Afton Chemical (Beijing) Co., Ltd.

manufacturer

Room 707 China World Office 1, No. 1 Jian Guo Men Wai Avenue, Beijing 100004 China

+86 10 6535 0000

A

Afton Chemical Japan Corporation

manufacturer

Hirakawacho Mori Tower 7F, 2-16-1, Hirakawacho, Chiyoda-ku, Tokyo, Japan

A

Afton Chemical Asia Pacific Company

manufacturer

Level 12, 20 Berry Street, North Sydney, NSW 2060, Australia

+61 299785800

A

Afton Chemical Korea Co., Ltd.

manufacturer

511 Yeongdong-daero, Gangnam-gu, 27th Floor Trade Tower, Seoul City 06164, Republic of Korea

+82-2-2191-4000

A

Afton Chemical Corporation

manufacturer

500 Spring St., Richmond, VA 23219, USA

+1-804-788-5800

Emergency Contacts

Emergency Contact

+1-703-527-3887

Emergency Contact

+65-3158-1349

Emergency Contact

+61-290372994

Emergency Contact

4001-204937

Emergency Contact

+81-345209637

Emergency Contact

00-308-13-2549

Emergency Contact

+1-703-741-5979

Emergency Contact

+44-870-8200418

Emergency Contact

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 4
Skin Irrit. Cat. 2
Carc. Cat. 2
STOT SE Cat. 3
Aquatic Acute Cat. 2
Aquatic Chronic Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H227 Combustible liquid.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from flames and hot surfaces. No smoking.
P233 Keep container tightly closed.
P235 Keep cool.
P261 Avoid breathing vapour.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing and eye or face protection.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P308 + P313 IF exposed or concerned: Get medical advice or attention.
P312 Call a POISON CENTER or doctor if you feel unwell.
P332 + P313 If skin irritation occurs: Get medical advice or attention.
P352 IF ON SKIN: Wash with plenty of water.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire, use water spray (fog), foam, dry chemical or CO₂.
P391 Collect spillage.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Polyolefin alkyl phenol alkyl amine --- 25 - 35% Yes
Solvent naphtha (petroleum), heavy arom. 64742-94-5 15 - 25% Yes
Solvent naphtha (petroleum), heavy arom. 64742-94-5 10 - 15% Yes
Solvent naphtha (petroleum), light arom. 64742-95-6 5 - 10% Yes
1,2,4-trimethylbenzene 95-63-6 3 - 5% Yes
naphthalene 91-20-3 3 - 5% Yes
2-ethylhexan-1-ol 104-76-7 1 - 3% Yes
mesitylene 108-67-8 1 - 1.7% Yes
Long-chain alkenyl amido alkyl ammonio acetate 25054-76-6 0.3 - 0.5% Yes
biphenyl 92-52-4 0.3 - 0.5% Yes
cumene 98-82-8 0.1 - 0.3% Yes
cymene 25155-15-1 0.1 - 0.3% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention. If necessary, call a poison center or physician. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. If not breathing, give artificial respiration. If breathing is difficult, administer oxygen.

Symptoms: Can cause central nervous system (CNS) depression. May cause drowsiness or dizziness. Adverse symptoms may include the following: nausea or vomiting, headache, drowsiness/fatigue, dizziness/vertigo, unconsciousness

Skin contact

Wash skin thoroughly with soap and water or use recognised skin cleanser. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Clean shoes thoroughly before reuse. Continue to rinse for at least 15 minutes.

Symptoms: Causes skin irritation. Defatting to the skin. Adverse symptoms may include the following: irritation, redness, dryness, cracking

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention.

Symptoms: Adverse symptoms may include the following: pain or irritation, watering, redness

Ingestion

Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Get medical attention. If necessary, call a poison center or physician. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

Symptoms: Can cause central nervous system (CNS) depression.

Immediate Medical Attention

Get medical attention.

Medical Treatment

No specific treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

In case of fire, use water spray (fog), foam, dry chemical or CO₂.

Unsuitable media

Do not use water jet.

Specific hazards

Combustible liquid. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a subsequent explosion. Runoff to sewer may create fire or explosion hazard. This material is toxic to aquatic life with long lasting effects.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilt material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing vapour or mist. Provide adequate ventilation.

Small spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. Use spark-proof tools and explosion-proof equipment. Approach the release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor.

Environmental

Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.

Cleanup methods

Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and place in an appropriate waste disposal container.

Materials: inert dry material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see Section 8). Avoid exposure - obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not get in eyes or on skin or clothing. Do not ingest. Avoid breathing vapour or mist. Avoid release to the environment. Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical (ventilating, lighting and material handling) equipment. Use only non-sparking tools. Empty containers retain product residue and can be hazardous. Do not reuse container.

Storage

Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Store locked up. Eliminate all ignition sources. Separate from oxidising materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabelled containers.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

Fire prevention

Store and use away from heat, sparks, open flame or any other ignition source. Eliminate all ignition sources. Use only non-sparking tools.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Yellow.
Colour Intensity
---
Form
---
Odor
Not available.
Odor Threshold
Not available.
Ph
Not available.
Melting Point
Not available.
Boiling Point
Not available.
Flash Point
Closed cup: 61°C (141.8°F) [Pensky-Martens Minimum]
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Vapor Density
Not available.
Relative Density
Not available.
Bulk Density
---
Density
0.936 g/cm³ [59°F (15°C)]
Flammability
Not available.
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
Not available.
Partition Coefficient
Not applicable.
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Kinematic (40°C): 22.5 mm²/s (22.5 cSt) Minimum
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

Avoid all possible sources of ignition (spark or flame). Do not pressurise, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition.

Incompatible

Reactive or incompatible with the following materials: oxidising materials

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Product/ingredient name: Polyolefin alkyl phenol alkyl amine Result: Acute EC50 5.4 mg/l, Species: Algae, Exposure: 96 hours, Remarks: Based on data for a similar substance. Result: Chronic NOEC 3.65 mg/l, Species: Algae, Exposure: 96 hours, Remarks: Based on data for a similar substance. Result: Chronic NOEC 3.38 mg/l, Species: Daphnia, Exposure: 21 days, Remarks: Based on data for a similar substance.

12.1 Toxicity

Solvent naphtha (petroleum), heavy arom. | Acute EL50 >1 mg/l | Algae - Pseudokirchneriella subcapitata | 72 hours | - | Acute EL50 1.4 mg/l | Daphnia - Daphnia magna | 48 hours | Based on data for a similar substance. | Acute LL50 2 to 5 mg/l | Fish - Oncorhynchus mykiss | 96 hours | - | Chronic NOEL 1 mg/l | Algae - Pseudokirchneriella subcapitata | 72 hours | - | Chronic NOEL 0.48 mg/l | Daphnia - Daphnia magna | 21 days | Based on data for a similar substance.

12.1 Toxicity

| Product/ingredient name | Result | Species | Exposure | Remarks | | --- | --- | --- | --- | --- | | Solvent naphtha (petroleum), light arom. | Acute EL50 3.1 mg/l | Algae - Pseudokirchneriella subcapitata | 72 hours | - | | | Acute EL50 4.5 mg/l | Daphnia - Daphnia magna | 48 hours | Based on data for a similar substance. | | | Acute LL50 8.2 mg/l | Fish - Pimephales promelas | 96 hours | Based on data for a similar substance. | | | Chronic NOEC 0.4 mg/l | Daphnia - Daphnia magna | 21 days | Based on data for a similar substance. | | | Chronic NOEL 0.5 mg/l | Algae - Pseudokirchneriella subcapitata | 72 hours | - | | | Chronic NOEL 2.6 mg/l | Fish - Pimephales promelas | 14 days | Based on data for a similar substance. |

12.1 Toxicity

Product/ingredient name: 1,2,4-trimethylbenzene. Result: Acute LC50 3.6 mg/l, Species: Daphnia - Daphnia magna, Exposure: 48 hours. Result: Acute LC50 7.72 mg/l, Species: Fish - Pimephales promelas, Exposure: 96 hours.

12.1 Toxicity

| Product/ingredient name | Result | Species | Exposure | Remarks | | --- | --- | --- | --- | --- | | naphthalene | Acute EC50 2.96 mg/l | Algae - Pseudokirchneriella subcapitata | 96 hours | - | | | Acute EC50 2.16 mg/l | Daphnia - Daphnia magna | 48 hours | - | | | Acute LC50 1.6 mg/l | Fish - Oncorhynchus mykiss | 96 hours | - | | | Chronic NOEC 0.59 mg/l | Daphnia - Daphnia pulex | 125 days | - | | | Chronic NOEC 0.12 mg/l | Fish - Oncorhynchus gorbuscha | 40 days | - |

12.1 Toxicity

Product/ingredient name: 2-ethylhexan-1-ol. Result: Acute EC50 39 mg/l, Species: Daphnia - Daphnia magna, Exposure: 48 hours. Result: Acute EL50 16.6 mg/l, Species: Algae - Desmodesmus subspicatus, Exposure: 72 hours. Result: Acute LC50 17.1 mg/l, Species: Fish - Leuciscus idus melanotus, Exposure: 96 hours. Result: Chronic EL10 5.3 mg/l, Species: Algae - Desmodesmus subspicatus, Exposure: 72 hours.

12.1 Toxicity

| Product/ingredient name | Result | Species | Exposure | Remarks | | --- | --- | --- | --- | --- | | mesitylene | Acute EC50 53 mg/l | Algae - Desmodesmus subspicatus | 48 hours | - | | | Acute LC50 6 mg/l | Crustaceans - Daphnia magna | 48 hours | - | | | Acute LC50 12.52 mg/l | Fish - Carassius auratus | 96 hours | - | | | Chronic EC10 16 mg/l | Algae - Desmodesmus subspicatus | 48 hours | - | | | Chronic NOEC 0.4 mg/l | Crustaceans - Daphnia magna | 21 days | - |

12.1 Toxicity

Product/ingredient name: Long-chain alkenyl amido alkyl ammonio acetate Result: Acute EC50 85.4 mg/l, Species: Algae - Pseudokirchneriella subcapitata, Exposure: 72 hours, Remarks: Based on data for a similar substance. Result: Acute EC50 33.6 mg/l, Species: Daphnia - Daphnia magna, Exposure: 48 hours, Remarks: Based on data for a similar substance.

12.1 Toxicity

Product/ingredient name: biphenyl Acute EL50 >100 mg/l, Micro-organism, 3 hours Acute LC50 0.406 mg/l, Fish - Oncorhynchus mykiss, 96 hours Chronic NOEC 42.9 mg/l, Algae - Pseudokirchnerella subcapitata, 72 hours Acute EC50 0.78 mg/l, Algae - Pseudokirchneriella subcapitata, 72 hours Acute LC50 0.36 mg/l, Daphnia - Daphnia magna, 48 hours Acute LC50 3 mg/l, Fish - Pimephales promelas, 96 hours Chronic NOEC 0.007 mg/l, Algae - Pseudokirchneriella subcapitata, 72 hours Chronic NOEC 0.17 mg/l, Daphnia - Daphnia magna, 21 days Chronic NOEC 0.229 mg/l, Fish - Oncorhynchus mykiss, 87 days

12.1 Toxicity

EC50 >2000 mg/l Micro-organism 3 hours; Acute EC50 2.01 mg/l Algae - Desmodesmus subspicatus 72 hours; Acute EC50 2.14 mg/l Crustaceans - Daphnia magna 48 hours; Acute EC50 10.6 mg/l Daphnia - Daphnia magna - Neonate 48 hours; Acute LC50 4.8 mg/l Fish - Oncorhynchus mykiss 96 hours; Chronic EC10 1.35 mg/l Algae - Desmodesmus subspicatus 72 hours; Chronic NOEC 0.35 mg/l Crustaceans - Daphnia magna 21 days

12.1 Toxicity

| Product/ingredient name | Result | Species | Exposure | Remarks | | --- | --- | --- | --- | --- | | cymene | Chronic NOEC 0.38 mg/l | Fish - D. rerio and P. promelas | 28 days | QSAR result. | | Acute EC50 5.8 mg/l | Algae | 72 hours | Based upon data for a similar product. Based on data for a similar substance. | | Acute EC50 1.9 mg/l | Daphnia | 48 hours | Based on data for a similar substance. | | Acute LC50 2 mg/l | Fish | 96 hours | Based on data for a similar substance. | | Chronic NOEC 0.48 mg/l | Algae | 72 hours | Based on data for a similar substance. | | Chronic NOEC 0.46 mg/l | Daphnia - Daphnia magna | 21 days | Based on data for a similar substance. | | Chronic NOEC 0.69 mg/l | Fish | - | Based on data for a similar substance. |

12.1 Toxicity

| Product/ingredient name | Test | Result | Remarks | | --- | --- | --- | --- |

12.2 Persistence and degradability

Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.2 Persistence and degradability

OECD 301F Ready Biodegradability - Manometric Respirometry Test | 58.6 % - Inherent - 28 days | Based on data for a similar substance.

12.2 Persistence and degradability

naphthalene | OECD 302C Inherent Biodegradability: Modified MITI Test (II) | 0 to 2 % - Not readily - 28 days | -

12.2 Persistence and degradability

2-ethylhexan-1-ol | OECD 301C Ready Biodegradability - Modified MITI Test (I) | 100 % - Readily - 14 days | -

12.1 Toxicity

12.2 Persistence and degradability

mesitylene | - | 42 % - Not readily - 28 days | -

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.2 Persistence and degradability

77 % - Readily - 29 days. Based on data for a similar substance.

12.2 Persistence and degradability

biphenyl | OECD 301C Ready Biodegradability - Modified MITI Test (I) | 66 % - Readily - 14 days | -

12.2 Persistence and degradability

| Product/ingredient name | Test | Result | Remarks | | --- | --- | --- | --- | | cumene | - | 70 % - Readily - 20 days | - |

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

Product/ingredient name: Solvent naphtha (petroleum), heavy arom. | LogPow: 2.8 to 6.5 | BCF: 99 to 5780 | Potential: high

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

Solvent naphtha (petroleum), light arom. | - | 10 to 2500 | high

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.3 Bioaccumulative potential

Product/ingredient name: 1,2,4-trimethylbenzene | LogPow: 3.63 | BCF: 243 | Potential: low

12.3 Bioaccumulative potential

Product/ingredient name: naphthalene, LogPow: 3.4, BCF: 36.5 to 168, Potential: low

12.3 Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | --- | --- | --- | --- | | 2-ethylhexan-1-ol | 2.9 | 25.33 | low |

12.3 Bioaccumulative potential

Product/ingredient name: mesitylene, LogPow: 3.42, BCF: 161, Potential: low

12.3 Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | --- | --- | --- | --- | | Long-chain alkenyl amido alkyl ammonio acetate | 0.8 | - | low |

12.3 Bioaccumulative potential

Product/ingredient name: biphenyl, LogPow: 4.008, BCF: 1900, Potential: high

12.3 Bioaccumulative potential

Product/ingredient name: cumene, LogPow: 3.55, BCF: 35.48, Potential: low

12.3 Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | --- | --- | --- | --- | | cymene | 4.1 | - | high |

Mobility in soil

Soil/water partition coefficient (Koc) : Not available. Mobility : Not available.

Other adverse effects

Hazardous to the ozone layer : Not applicable. Other adverse effects : No known significant effects or critical hazards.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

Disposal

Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Solvent naphtha, Trimethylbenzenes)
Transport Class
9
Packing Group
III
ADR

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IMDG

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IATA

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HiTEC® 66000 Fuel Additive?

The signal word is warning.

What is the physical form of HiTEC® 66000 Fuel Additive?

HiTEC® 66000 Fuel Additive is a liquid. with yellow. color. It has not available. odor.

What is the solubility of HiTEC® 66000 Fuel Additive?

Not available.

What is HiTEC® 66000 Fuel Additive used for?

Petrochemical industry: Fuel additive.

What are the hazard statements for HiTEC® 66000 Fuel Additive?

This substance has 5 hazard statements:

  • H227: Combustible liquid.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.
  • H351: Suspected of causing cancer.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of HiTEC® 66000 Fuel Additive?

The melting point is Not available. and the boiling point is Not available..