Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Liebherr Antifreeze OS Concentrate
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- H710-80G4-X00Q-3VM9
Identified Uses
Radiator protecting medium
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
LIEBHERR-LOGISTICS GmbH
manufacturer
St. Vitus 1, DE - 88457 Kirchdorf an der Iller
+49 7354 80-6060
LIEBHERR-COMPONENTS BIBERACH GmbH
manufacturer
Hans-Liebherr-Strasse 45, DE - 88400 Biberach an der Riß
+49 7354 80-6060
LIEBHERR-WERK BIBERACH GmbH
manufacturer
Memminger Straße 120, DE - 88400 Biberach an der Riß
+49 7354 80-6060
LIEBHERR-WERK EHINGEN GmbH
manufacturer
Dr.-Hans-Liebherr-Strasse 1, DE - 89584 Ehingen
+49 7354 80-6060
LIEBHERR-MISCHTECHNIK GmbH
manufacturer
Im Elchgrund 12, DE - 88427 Bad Schussenried
+49 7354 80-6060
LIEBHERR-MINING EQUIPMENT COLMAR SAS
manufacturer
49 rue Frédéric Hartmann, CS 50038, FR - 68025 Colmar Cedex
+49 7354 80-6060
LIEBHERR-WERK NENZING GmbH
manufacturer
Dr.-Hans-Liebherr-Strasse 1, AT - 6710 Nenzing
+49 7354 80-6060
Liebherr-Lubricants
Emergency Contacts
Emergency Contact
+49 7354 80-6060
During working hours (CET)
CHEMTREC
+44 203 807 3798
CHEMTREC
+353 190 146 70
CHEMTREC
+31 858 880 596
CHEMTREC
+61 290 372 994
CHEMTREC
+64 980 10034
CHEMTREC
0800 014 676
CHEMTREC
+1 703 741 5970
CHEMTREC
+91 807 127 9207
CHEMTREC
+1 703 527 3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanediol EC: 203-473-3 | 107-21-1 | 50 - 100% | Yes |
| Disodium sebacate EC: 241-300-3 | 17265-14-4 | 5% | Yes |
| Sodium 4(or 5)-methyl-1H-benzotriazolide EC: 265-004-9 | 64665-57-2 | 0.25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Call for a doctor immediately. Rinse out mouth and then drink plenty of water.
Immediate Medical Attention
Call for a doctor immediately.
Medical Treatment
Treat symptomatically. Administer pure ethanol in a drinkable concentration.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
Do not use water with full jet.
In case of fire, the following can be released: Carbon dioxide (CO₂), Carbon monoxide (CO)
Firefighter Protection
Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Particular danger of slipping on leaked/spilled product.
Do not allow to enter sewers, surface or ground water. Prevent from spreading (e.g. by damming-in or oil barriers).
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Liebherr Antifreeze Concentrate - First Fill
---
Heavy Duty PF Antifreeze/Coolant - Concentrate
---
Havoline Conventional Antifreeze/Coolant - Concentrate
---
Eurol Antifreeze G11
UFI: HDYX-Y24E-EA0N-XWDF
Scania Coolant Concentrate
---
Cat® ELC™ (Extended Life Coolant) Concentrate with Embitterment
---
Antifreeze/Coolant HT-FVA
UFI: DEX5-QFEF-A100-06EK
Q8 Antifreeze Long Life Premixed
UFI: 80F0-N01P-000W-NJHV
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When handling product in drums use safety footwear and suitable tools. At work please do not eat, drink or smoke.
Store only in the original receptacle. Recommended storage temperature: 5 to 40 °C. Do not store below freezing point. The storage in galvanized containers is not recommended.
At work please do not eat, drink or smoke.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Wearing protective gloves (EN ISO 374) is recommended. Preventive skin protection by use of skin-protecting agents is recommended. Material of gloves: Butyl rubber or Nitrile rubber. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Penetration time of glove material: The exact breakthrough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
No respiratory protection is ordinarily required under normal conditions of use. Select a filter suitable for combined particulate/ gases and organic vapours (boiling point > 65 °C, AP2, EN 14387), if exposure limit is exceeded or when aerosol or mist is formed.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
See 10.2 to 10.6
Reacts with strong oxidising agents.
Avoid extreme temperatures and direct sunlight.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Liebherr Antifreeze OS Concentrate?
The signal word is warning.
What is the physical form of Liebherr Antifreeze OS Concentrate?
Liebherr Antifreeze OS Concentrate is a fluid with magenta color. It has mild odor.
What is Liebherr Antifreeze OS Concentrate used for?
Radiator protecting medium
What are the hazard statements for Liebherr Antifreeze OS Concentrate?
This substance has 2 hazard statements:
- H302: Harmful if swallowed.
- H373: May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.
What is the melting point of Liebherr Antifreeze OS Concentrate?
The melting point is Not determined. and the boiling point is >160 °C (ASTM D1120).