NextSDS Logo
Safety Data Sheet EN

Liebherr Antifreeze Concentrate - First Fill

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Liebherr Antifreeze Concentrate - First Fill
Product Code
18070

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Radiator protecting medium, Coolant

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

L

LIEBHERR-LOGISTICS GmbH

manufacturer

St. Vitus 1, D - 88457 Kirchdorf an der Iller

+49 (0) 73 54 / 80-6060

L

LIEBHERR-COMPONENTS BIBERACH GmbH

manufacturer

Hans-Liebherr-Strasse 45, D - 88400 Biberach an der Riß

L

LIEBHERR-WERK BIBERACH GmbH

manufacturer

Memminger Straße 120, D - 88400 Biberach an der Riß

L

LIEBHERR-WERK EHINGEN GmbH

manufacturer

Dr.-Hans-Liebherr-Strasse 1, D - 89584 Ehingen

L

LIEBHERR-MISCHTECHNIK GmbH

manufacturer

Im Elchgrund 12, D - 88427 Bad Schussenried

L

LIEBHERR-MINING EQUIPMENT COLMAR SAS

manufacturer

49 rue Frédéric Hartmann, CS 50038, F - 68025 Colmar Cedex

L

LIEBHERR-WERK NENZING GmbH

manufacturer

Dr.-Hans-Liebherr-Strasse 1, A - 6710 Nenzing

Emergency Contacts

Emergency Contact

+49 (0) 73 54 / 80-6060

During working hours (CET)

CHEMTREC

+1-703-527-3887

24 hours

Emergency Contact

+44-870-8200418

Emergency Contact

+(61)-290372994

Emergency Contact

+31-858880596

Emergency Contact

0-800-983-611

Emergency Contact

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
STOT RE Cat. 2 H373

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H373 May cause damage to organs through prolonged or repeated exposure.

Precautionary Statements

P261 Avoid breathing mist/vapours/spray.
P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P314 Get medical advice/attention if you feel unwell.
P330 Rinse mouth.
P501 Dispose of contents/container in accordance with local regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Ethanediol EC: 203-473-3 107-21-1 50 - 100% Yes
Sodium 2-ethylhexanoate EC: 243-283-8 19766-89-3 5% Yes
Disodium tetraborate pentahydrate, borax pentahydrate EC: 215-540-4 12179-04-3 1% Yes

The wording of the hazard symbols and H-phrases is specified in section 16 if dangerous ingredients are mentioned. Components with threshold limit values are mentioned at section 8.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Ingestion

Seek medical treatment. Call a doctor immediately. Rinse out mouth and then drink plenty of water.

Immediate Medical Attention

Call a doctor immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions. Water spray. Alcohol resistant foam.

Unsuitable media

Do not use water with full jet.

Specific hazards

In case of fire, the following can be released: Carbon monoxide (CO), Carbon dioxide (CO₂)

Firefighter Protection

Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases. Wear fully protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Particular danger of slipping on leaked/spilled product.

Environmental

Dilute with plenty of water.

Cleanup methods

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

Materials: sand, diatomite, acid binders, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

When handling product in drums use safety footwear and suitable tools. At work please do not eat, drink or smoke.

Storage

Store only in the original receptacle. Provide floor trough without outlet. Prevent any seepage into the ground. Use only receptacles specifically permitted for this substance/product. Store away from foodstuffs. Store away from oxidising agents. Recommended storage temperature: 5 to 40 °C. The storage in galvanized containers is not recommended. Do not store below freezing point.

Hygiene

At work please do not eat, drink or smoke.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If formation of steam, mist or aerosols take place the concentration in the air has to be kept at the lowest possible level.

Hands

Protective gloves. Safety gloves of nitrile rubber or viton. Preventive skin protection by use of skin-protecting agents is recommended. Material of gloves: Fluorocarbon rubber (Viton), Nitrile rubber, NBR. Penetration time: Level = 6 (480 min).

Eyes

Tightly sealed goggles.

Respiratory

No respiratory protection is ordinarily required under normal conditions of use. Select a filter suitable for combined particulate/ gases and organic vapours (boiling point > 65 °C, EN 14387), if exposure limit is exceeded or when aerosol or mist is formed.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Fluid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Fluid
Colour
Blue
Colour Intensity
---
Form
---
Odor
Mild
Odor Threshold
Not determined.
Ph
7.1 - 7.3
Melting Point
Not determined.
Boiling Point
> 164 °C
Flash Point
> 120 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
~ 2 hPa
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1.12 g/cm³
Flammability
Not applicable.
Upper Explosive Limit
15.0 Vol %
Lower Explosive Limit
3.0 Vol %
Explosive Limits
---
Auto Ignition Temperature
> 200 °C
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
---
Solubility In Water
Fully miscible.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not determined.
Kinematic Viscosity
25 mm²/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

See 10.2 to 10.6

Hazardous reactions

Reacts with strong oxidising agents.

Avoid

Avoid extreme temperatures and direct sunlight.

Incompatible

No further relevant information available.

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Liebherr Antifreeze Concentrate - First Fill?

The signal word is warning.

What is the physical form of Liebherr Antifreeze Concentrate - First Fill?

Liebherr Antifreeze Concentrate - First Fill is a fluid appearing as fluid with blue color. It has mild odor.

What is Liebherr Antifreeze Concentrate - First Fill used for?

Radiator protecting medium, Coolant

What are the hazard statements for Liebherr Antifreeze Concentrate - First Fill?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H373: May cause damage to organs through prolonged or repeated exposure.

What is the melting point of Liebherr Antifreeze Concentrate - First Fill?

The melting point is Not determined. and the boiling point is > 164 °C.