NextSDS Logo
Safety Data Sheet EN

Infineum SV157

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Infineum SV157
Product Code
73820

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Viscosity modifier additive for lubricating oil

Uses advised against

This material should not be used for any other purpose than that recommended without expert advice.

Manufacturers & Suppliers

INFINEUM NETHERLANDS B.V. logo

INFINEUM NETHERLANDS B.V.

manufacturer

Westblaak89 Rotterdam 3012 KG Nederland

http://www.infineum.com

Emergency Contacts

Emergency Contact

04-4274.4690

Emergency Contact

+33-4.4274.4690

Emergency Contact

0221-7499 3355

Emergency Contact

+49-221-7499 3355

Emergency Contact

019-2150 221

Emergency Contact

+39 019-2150 221

Emergency Contact

01235 549777

Emergency Contact

+44 1235 549777

Emergency Contact

070 245 245

Emergency Contact

+32 70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

No hazardous ingredients.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician.

Skin contact

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician. In case of burns apply cold water until pain subsides then seek medical advice.

Eye contact

Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists: Get medical advice/ attention.

Ingestion

Clean mouth with water and drink afterwards plenty of water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Medical Treatment

No hazards which require special first aid measures.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames

Unsuitable media

Do NOT use water jet.

Specific hazards

Not classified as flammable or combustible, but will combust if ignited.

Instructions

Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with spilled material. Do not touch or walk through spilled material.

Small spill

Wipe up with absorbent material (e.g. cloth, fleece).

Large spill

Dyke far ahead of liquid spill for later recovery and disposal.

Environmental

Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. Try to prevent the material from entering drains or water courses.

Cleanup methods

Recover by pumping or with suitable absorbent. Wipe up with absorbent material (e.g. cloth, fleece). Seek the advice of a specialist before using dispersants.

Materials: absorbent material (e.g. cloth, fleece)

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

For safety reasons free water must be avoided when product is handled above 95degC. Free water is always detrimental to product quality. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area.

Storage

Keep container tightly closed in a dry and well-ventilated place.

Hygiene

Smoking, eating and drinking should be prohibited in the application area.

Fire prevention

Normal measures for preventive fire protection.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No Exposure Scenario annex is attached to this safety data sheet as it is a non-classified mixture containing no hazardous substances. No special requirements under ordinary conditions of use and with adequate ventilation.

Hands

Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. For prolonged or repeated contact use protective gloves. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.

Eyes

Safety glasses. The applicable European standard can be found in EN 166.

Respiratory

No personal respiratory protective equipment normally required. The applicable European standard can be found in EN 14605.

Skin/Body

Long sleeved clothing. The applicable European standard can be found in EN 140, EN 137, EN 143, EN 14387.

Environmental

No Exposure Scenario annex is attached to this safety data sheet as it is a non-classified mixture containing no hazardous substances. Prevent entry into waterways, sewers, basements or confined areas. Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. Try to prevent the material from entering drains or water courses. If the product contaminates rivers and lakes or drains inform respective authorities.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
clear
Colour Intensity
---
Form
viscous liquid
Odor
hydrocarbon-like
Odor Threshold
not determined
Ph
Not applicable
Melting Point
not determined
Boiling Point
not determined
Flash Point
190 °C (374 °F) Method: Pensky-Martens Closed Cup (ASTM D93)
Freezing Point
not determined
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable
Vapor Pressure
< 0,1 hPa (< 0,1 mmHg) at 20 °C (68 °F) estimated
Vapor Density
not determined
Relative Density
0,873 at 15,6 °C (60,1 °F)
Bulk Density
Not applicable
Density
0,872 g/cm3 at 15 °C (59 °F)
Flammability
not determined
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
not determined
Solubility
---
Partition Coefficient
not determined
Solubility In Water
< 0,0001 g/l estimated
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
5.700 mm2/s at 40 °C (104 °F) Method: ASTM D 445; 5.500 mm2/s at 60 °C (140 °F) Method: ASTM D 445; 4.560 mm2/s at 80 °C (176 °F) Method: ASTM D 445
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

No hazards to be specially mentioned.

Avoid

Excessive heat.

Incompatible

Strong oxidizing agents

Decomposition

No decomposition if used as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Product: Toxicity to fish : No data is available on the product itself. 9 / 16 SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006 Infineum SV157 Infineum Version 1.0 Revision Date 29.07.2015 Print Date 29.07.2015 Toxicity to daphnia and other aquatic invertebrates : No data is available on the product itself. Toxicity to algae : No data is available on the product itself.

No data is available on the product itself regarding toxicity to fish, daphnia, or algae.

12.2 Persistence and degradability

Product: Biodegradability : No data is available on the product itself.

No data is available on the product itself regarding biodegradability.

12.3 Bioaccumulative potential

Product: Bioaccumulation : No data is available on the product itself. Partition coefficient: n-octanol/water : not determined

No data is available on the product itself regarding bioaccumulation, and the partition coefficient (n-octanol/water) has not been determined.

12.4 Mobility in soil

Product: Mobility : No data is available on the product itself.

No data is available on the product itself.

12.5 Results of PBT and vPvB assessment

Assessment : No data is available on the product itself. This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

12.6 Other adverse effects

Product: Additional ecological information : None known.

No additional ecological information known.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of contents/ container to an approved waste disposal plant.

Disposal

Disposal recommendations based on material as supplied, Disposal must be in accordance with applicable laws and regulations, and material characteristics at time of disposal

Waste Codes

13 02 XX waste engine, gear and lubricating oils EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3257
Shipping Name
Elevated Temperature Liquid, n.o.s. (Aryl polyolefin)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

To import this product into the EU your company requires registrations and/or pre-registrations for all constituent substances that are subject to REACH registration.

Chemical Safety Assessment Not performed

Risk classification according to VbF : Exempt

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Infineum SV157?

The signal word is no signal word.

What is the physical form of Infineum SV157?

Infineum SV157 is a liquid with clear color. It has hydrocarbon-like odor.

What is Infineum SV157 used for?

Viscosity modifier additive for lubricating oil

What is the melting point of Infineum SV157?

The melting point is not determined and the boiling point is not determined.