Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W
- Synonyms
- White mineral oil
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119487078-27-0055
Identified Uses
Lubricant, personal care, food & plastics process oil
Manufacturers & Suppliers
Renkert Oil
manufacturer
3817 Main Street, Morgantown, PA 19543 USA
+1 610 286 8012
http://RenkertOil.com
Renkert Oil Europe BVBA
distributor
Blauwe Weg 44, Haven 227-243, 2030, Antwerp Belgium
+1 610 422 3567
Emergency Contacts
CHEMTREC (USA)
(800) 424-9300
CHEMTREC (USA)
1 703 527 3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
See composition of ingredients in Section 3.2
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| White mineral oil EC: 232-455-8 | 8042-47-5 | 100% | No |
Classification according to regulation (EC) No 1272/2008 (CLP) –
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air, keep patient warm and at rest. If breathing is irregular or stopped, give artificial respiration. If unconscious place in the recovery position and obtain immediate medical attention. Give nothing by mouth.
Remove contaminated clothing. Wash skin thoroughly with soap and water or use a recognized skin cleanser.
Symptoms: Contact with the skin is not expected to cause prolonged or significant irritation. Contact with the skin is not expected to cause an allergic skin response. Not expected to be harmful to internal organs if absorbed through the skin.
Immediately flush the eyes with large amounts of water for at least 15 minutes, alternately lifting the upper and lower eyelids. After 5 minutes, if appropriate, remove contact lenses and continue flushing the eyes for an additional 15 minutes.
Symptoms: Not expected to cause prolonged or significant eye irritation.
Do NOT induce vomiting.
Symptoms: Not expected to be harmful if swallowed.
Immediate Medical Attention
If unconscious place in the recovery position and obtain immediate medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, CO₂, powder, water spray
water jet
Firefighting personnel should respond with appropriate protective clothing, firefighting gear, and breathing equipment as trained.
Firefighter Protection
Firefighting personnel should respond with appropriate protective clothing, firefighting gear, and breathing equipment as trained.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Put on appropriate personal protective equipment (see section 8).
Do not allow spills to enter drains or waterways.
Clean up spill as soon as possible, observing precautions in Exposure Controls/Personal Protection.
Related Products
Similar products with comparable safety profiles
Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W
---
Renoil 130-T, Renoil 150-T, Renoil 180-T, Renoil 200-T, Renoil 220-T, Renoil 350-T, Renoil 380-T, Renoil 425-T, Renoil 500-T, Renoil 1000-T, Renoil 1350-T, Renoil 1500-T
---
Renoil 3501
---
CHEVRON NEUTRAL OIL 220R, 600R
---
CHEVRON NEUTRAL OIL 100R, 220R, 600R
---
Chevron Neutral Oil 220R
---
Chevron Neutral Oil 220R
---
Chevron Neutral Oil 150R
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from flames and hot surfaces. Use good personal hygiene practices and wear appropriate personal protective equipment. Spills will produce very slippery surfaces.
Use good personal hygiene practices
Keep away from flames and hot surfaces.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction.
Nitrile rubber gloves should be worn.
No special eye protection is normally required. Where splashing is possible, wear safety glasses with side shields as a good safety practice.
If workers are exposed to concentrations above the exposure limit they must use the appropriate, certified respirators.
Wear overalls to keep skin contact to a minimum.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal circumstances.
Hazardous Polymerization will not occur.
None known (none expected).
Extended exposure to high temperatures can cause decomposition. Avoid all possible sources of ignition.
Strong acids or strong oxidizing agents, such as chlorates, nitrates, peroxides, etc.
Not anticipated under conditions of normal use.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Acute aquatic toxicity values are greater than 100 mg/L for invertebrates, algae, and fish.
12.2 Persistence and degradability
The material is inherently biodegradable but not readily biodegradable.
Aquatic Ecotoxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment (persistent, bioaccumulative and toxic, very persistent, very bioaccumulative) This product contains no PBT/vPvB chemicals.
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal.
Contact your sales representative or local environmental or health authorities for approved disposal or recycling methods.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- PETROLEUM OIL, N.O.I.B.N., NOT REGULATED AS A HAZARDOUS MATERIAL
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The regulatory data in Section 15 is not intended to be all-inclusive, only selected regulations are represented.
This safety data sheet is in compliance with the following EU legislation and its adaptations - as far as applicable - : 67/548/EEC, 1999/45/EC, 98/24/EC, 92/85/EC, 94/33/EC, 91/689/EEC, 1999/13/EC, Commission Regulation (EU) 2015/830, Regulation (EC) No 1272/2008 and their amendments as well as the following British legislation: The Control of Substances Hazardous to Health Regulations (COSHH) 2002, COSHH Essentials, The Management of Health and Safety at Work Regulations 1999
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W known by?
Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W is also known as: White mineral oil
What is the hazard signal word for Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W?
The signal word is no signal word.
What is the physical form of Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W?
Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W is a colorless liquid appearing as colorless liquid with colorless color. It has mild petroleum odor to odorless odor.
What is the solubility of Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W?
Soluble in hydrocarbon solvents, insoluble in water.
What is Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W used for?
Lubricant, personal care, food & plastics process oil
What is the melting point of Renoil 220-W, Renoil 350-W, Renoil 380-W, Renoil 500-W?
The melting point is Not Applicable and the boiling point is >260 C (500 F).