NextSDS Logo
Safety Data Sheet EN

ClinMass® Diluting Solution D for Trace Elements in Plasma / Serum

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
ClinMass® Diluting Solution D for Trace Elements in Plasma / Serum
Product Code
MS50021

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Product for in-vitro diagnostic use

Manufacturers & Suppliers

RECIPE Chemicals + Instruments GmbH logo

RECIPE Chemicals + Instruments GmbH

manufacturer

Dessauerstr. 3, 80992 Munich

+49 (0)89 547081-0

http://www.recipe.de

Emergency Contacts

24-h-Emergency Phone Number

+49 / (0)700 24112112 (RCR)

Mon - Sun 12:00 AM - 11:59 PM

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.

Skin contact

Take off immediately all contaminated clothing. Wash with plenty of soap and water.

Eye contact

Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.

Ingestion

Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.

Immediate Medical Attention

In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, BC-powder, Carbon dioxide (CO2)

Unsuitable media

Water jet

Specific hazards

In case of fire and/or explosion do not breathe fumes.

Instructions

Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

For non-emergency personnel: Remove persons to safety. For emergency responders: Wear breathing apparatus if exposed to vapours/dust/spray/gases.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage: sawdust, kieselgur (diatomite), sand, universal binder

Materials: cloth, fleece, sawdust, kieselgur (diatomite), sand, universal binder

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well-ventilated areas.

Storage

Protect from sunlight. Protect from moisture. Protect against external exposure, such as frost.

Hygiene

Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

General ventilation.

Hands

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.

Eyes

Wear eye/face protection.

Respiratory

In case of inadequate ventilation wear respiratory protection.

Environmental

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
colourless
Colour Intensity
---
Form
---
Odor
information on this property is not available
Odor Threshold
---
Ph
not determined
Melting Point
not determined
Boiling Point
99.97 °C at 1 atm (calculated value, referring to a component of the mixture)
Flash Point
not determined
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
23 hPa at 20 °C (calculated value, referring to a component of the mixture)
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0.9982 g/ml (calculated value)
Flammability
non-combustible
Upper Explosive Limit
not determined
Lower Explosive Limit
not determined
Explosive Limits
---
Auto Ignition Temperature
not determined
Decomposition Temperature
not relevant
Solubility
not determined
Partition Coefficient
this information is not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Reactivity

Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials".

Hazardous reactions

No known hazardous reactions.

Avoid

There are no specific conditions known which have to be avoided.

Incompatible

There is no additional information.

Decomposition

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Shall not be classified as hazardous to the aquatic environment.

The substance is not classified as hazardous to the aquatic environment.

12.2 Persistence and degradability

Data are not available.

Data are not available.

12.3 Bioaccumulative potential

Data are not available.

Data are not available.

12.4 Mobility in soil

Data are not available.

Data are not available.

12.5 Results of PBT and vPvB assessment

Does not contain a PBT-/vPvB-substance at a concentration of ≥ 0,1%.

The substance does not contain PBT or vPvB substances at concentrations of 0.1% or higher.

12.6 Endocrine disrupting properties

Does not contain an endocrine disruptor (ED) at a concentration of ≥ 0,1%.

The substance does not contain an endocrine disruptor (ED) at a concentration of ≥ 0,1%.

12.7 Other adverse effects

Data are not available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ClinMass® Diluting Solution D for Trace Elements in Plasma / Serum?

The signal word is no signal word.

What is the physical form of ClinMass® Diluting Solution D for Trace Elements in Plasma / Serum?

ClinMass® Diluting Solution D for Trace Elements in Plasma / Serum is a liquid with colourless color. It has information on this property is not available odor.

What is the solubility of ClinMass® Diluting Solution D for Trace Elements in Plasma / Serum?

not determined

What is ClinMass® Diluting Solution D for Trace Elements in Plasma / Serum used for?

Product for in-vitro diagnostic use

What is the melting point of ClinMass® Diluting Solution D for Trace Elements in Plasma / Serum?

The melting point is not determined and the boiling point is 99.97 °C at 1 atm (calculated value, referring to a component of the mixture).