Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Morphine-D3.monohydrate, 0.1mg/ml in Methanol
- Product Code
- LPM-M-39-FB-0.1LM
- Synonyms
- (as free base)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory use
Uses advised against
No information available
Manufacturers & Suppliers
Toronto Research Chemicals
manufacturer
2 Brisbane Road, Toronto, ON, M3J 2J8
http://www.trc-canada.com
Emergency Contacts
Emergency Contact
+1(416) 665-9696
0800-1700 (GMT-5)
CHEMTREC
1-800-424-9300
CHEMTREC
+1 703-741-3877
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of organic compounds.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Morphine-D3.monohydrate | 202656-19-7 | 10% | No |
| Methanol | 67-56-1 | 90 - 100% | No |
This product contains a stable isotope
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing has stopped, give artificial respiration. Get medical attention immediately. Remove to fresh air. Avoid direct contact with skin. Use barrier to give mouth-to-mouth resuscitation. Get immediate medical attention. Immediate medical attention is required. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If breathing is difficult, (trained personnel should) give oxygen.
Symptoms: May cause allergic respiratory reaction.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get immediate medical attention.
Symptoms: May cause an allergic skin reaction.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Get immediate medical attention.
Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Symptoms: May produce an allergic reaction.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.
Do not scatter spilled material with high pressure water streams.
Risk of ignition. Product is or contains a sensitiser. May cause sensitisation by inhalation and skin contact.
CAUTION: Use of water spray when fighting fire may be inefficient.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. Do not touch or walk through spilled material. Do not breathe vapour or mist.
Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Morphine-D3 (1.0 mg/ml) in Methanol
---
Morphine 1.0 mg/ml in Methanol
UFI: R1HN-M0XX-400X-4FTY
Ethylmorphine (1.0 mg/mL) in Methanol
---
Codeine-D6 (1.0 mg/ml) in Methanol
---
Cocaine-D3.HCl, 0.1mg/ml in Methanol
UFI: A7QG-G0SY-C009-SUY5
Fentanyl-D5 0.1 mg/ml in Methanol
UFI: 9E9P-C0YP-400G-0EA9
6-Acetylmorphine-D₃ 0.1 mg/ml in Acetonitrile
UFI: V5DJ-Q0D4-N00Q-YDH6
d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol
UFI: 2VPH-606P-P00Y-XR06
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protection equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers. Use according to package label instructions. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Take off contaminated clothing and wash it before reuse. Do not eat, drink or smoke when using this product. Remove contaminated clothing and shoes. Do not breathe vapour or mist.
Please refer to the manufacturer's certificate for specific storage and transport temperature conditions. Keep containers tightly closed in a dry, cool and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Take off contaminated clothing and wash it before reuse. Do not eat, drink or smoke when using this product. Remove contaminated clothing and shoes.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers, Eyewash stations, Ventilation systems.
Wear protective butyl rubber gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. Wear suitable gloves. Impervious gloves.
Avoid contact with eyes. Wear safety glasses with side shields (or goggles). Tight sealing safety goggles.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron. Antistatic boots.
Do not allow into any sewer, on the ground or into any body of water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
None under normal processing.
Heat, flames and sparks. Excessive heat.
None known based on information supplied.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.3 Bioaccumulative potential
Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Should not be released into the environment.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1230
- Shipping Name
- Methanol mixture
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Morphine-D3.monohydrate, 0.1mg/ml in Methanol known by?
Morphine-D3.monohydrate, 0.1mg/ml in Methanol is also known as: (as free base)
What is the hazard signal word for Morphine-D3.monohydrate, 0.1mg/ml in Methanol?
The signal word is danger.
What is the physical form of Morphine-D3.monohydrate, 0.1mg/ml in Methanol?
Morphine-D3.monohydrate, 0.1mg/ml in Methanol is a liquid appearing as liquid with colourless color. It has alcohol odor.
What is Morphine-D3.monohydrate, 0.1mg/ml in Methanol used for?
Laboratory use
What are the hazard statements for Morphine-D3.monohydrate, 0.1mg/ml in Methanol?
This substance has 8 hazard statements:
- H225: Highly flammable liquid and vapour
- H301: Toxic if swallowed
- H311: Toxic in contact with skin
- H331: Toxic if inhaled
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled
- H361: Suspected of damaging fertility or the unborn child
- H362: May cause harm to breast-fed children
- H370: Causes damage to organs
What is the melting point of Morphine-D3.monohydrate, 0.1mg/ml in Methanol?
The melting point is -98 °C / -144.4 °F and the boiling point is 64.7 °C / 148.46 °F.