Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PK (HL1-003)
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
YAMAUCHI CORP. Kanuma Plant
manufacturer
11-2, Satsuki-cho, Kanuma-shi, Tochigi 322-0014, Japan
+81-289-76-2101
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bisphenol A Epoxy Resin EC: 500-033-5 | 25068-38-6 | 50% | No |
| Silica flour EC: 238-878-4 | 14808-60-7 | 25 - 50% | No |
| Potassium octatitanate EC: 261-919-2 | 59766-31-3 | 5 - 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and get medical inspection when necessary.
Remove/Take off immediately all contaminated clothing. Wash skin with plenty of soap and water.
Symptoms: skin irritate or rash
Rinse cautiously with plenty of water for 15 minutes.
First rinse mouth enough. Drink plenty of water. Do not induce vomiting.
Immediate Medical Attention
Get medical inspection when necessary (inhalation); seek medical attention (skin irritation or rash); get medical attention (eye contact and ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical powder, foam, water spray, carbon dioxide or sand.
Do not use direct water jet.
Fire may release toxic gases.
Keep fire-exposed containers cool by water spray.
Firefighter Protection
Wear full protective clothing and self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate all people except the cleaning operation personnel from the site. Wear proper protective equipment to avoid contact with skin, eyes and clothing. Avoid inhalation of gas.
Sweep up small amounts with e.g. waste cotton.
Do not allow the product to enter drains, water courses or soil.
Collect spillage with sand or other absorbent material. Sweep up small amounts with e.g. waste cotton. Gather waste for disposal as hazardous waste. Wash contaminated area with alkaline washing agent.
Materials: sand or other absorbent material, waste cotton
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Refer to 8. Exposure control/personal protection. It is noted enough to react with the strong acid, the amine compound, the mercaptan and base. It is noted enough that the generation of heat temperature rises, as the mixture batch scale grows. The container that has damage, corrodes, and cracks should not be used. Collect used containers in the fixed place.
Store according to regulations for combustible material. Store in a well-ventilated place. Keep cool. Store in closed container.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In order to keep worker at exposure below statutory limits, process enclosures, local exhaust ventilation or other engineering controls should be equipped.
Wear protective gloves
eye protection like goggles/face protection
Wear hazard mask for organic and toxic gas. When necessary, to use the mask such as supplied-air respirator, self-contained breathing apparatus or oxygen breathing apparatus is recommended.
protective clothing or impervious clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal use conditions.
Reaction with some curing agents may produce considerable heat and possible violent decomposition.
Avoid high temperature.
Strong oxidizing agents, strong Lewis or mineral acids and strong mineral and organic bases.
No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Liquid waste must be transported to facilities for collecting hazardous waste or to other similar place to be disposed of as hazardous waste. Solvent free and hardened resin can usually be taken to a public dumping area.
The waste is collected and disposed of in accordance with regulations given by authorities.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, Liquid, N.O.S (Modified epoxy resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Label Information required under EU regulations
Contains: Bisphenol A epoxy resin. Symbols: Xn (harmful), N (dangerous for the environment). Risk phrases: R36/38, R43, R51/53. Safety phrases: S26, S28, S61.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PK (HL1-003)?
The signal word is warning.
What is the physical form of PK (HL1-003)?
PK (HL1-003) is a viscous liquid appearing as viscous liquid with white color. It has feature stench odor.
What are the hazard statements for PK (HL1-003)?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H320: Causes eye irritation.
- H400: Very toxic to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.