NextSDS Logo
Safety Data Sheet EN

SHELL ALVANIA GREASE S 1,2,3

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SHELL ALVANIA GREASE S 1,2,3
Product Code
613061

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricating grease.

Manufacturers & Suppliers

S

Showa Shell Sekiyu K.K.

manufacturer

3-2, Daiba 2-chome, Minato-ku, Tokyo, 135-8074, Japan

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

Not classified under GHS criteria.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Lubricating grease.

Chemical Name CAS Number Concentration Hazardous
Lubricant base oil --- 75 - 85% No
Grease thickner (Lithium soap) --- 5 - 15% No
Additives --- 5 - 10% No

The highly refined mineral oil contains <3% DMSO-extract, according to IP346.

Notes

Component Information : Lubricant base oil 75-85% Grease thickner (Lithium soap) 5-15% Additives 5-10%

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casualty to fresh air and keep at rest in a position comfortable for breathing. Cover with blanket to keep warm and rest in a quiet surrounding. Seek immediate medical advice and attention.

Symptoms: Inhalation if mist may cause feeling ill.

Skin contact

Wash skin with large amount of water using soap.

Symptoms: Skin contact may cause irritation.

Eye contact

Rinse cautiously with clean water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. After rinsing for a minimum of 15 minutes, seek medical advice and attention.

Symptoms: Eye contact may cause irritation.

Ingestion

Without inducing vomiting, call a doctor for treatment. If mouth has been dirtied, clean with water.

Symptoms: If swallowed, may irritate mucous membrane of stomach and induce vomiting.

Immediate Medical Attention

Seek immediate medical advice and attention. Call a doctor or poison control center for guidance.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Concentrated strong liquid in mist and powder forms, carbon dioxide and foam. Use powder and carbon dioxide may be used small fires only. Effective to use foam to shutdown the air in a large fires.

Unsuitable media

Do not use water in a jet.

Specific hazards

Hazardous combustion products may include: A complex mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide. Unidentified organic and inorganic compounds

Instructions

Water the surrounding equipment to cool them down. Cordon off the affected place and its vicinity to all, except the concerned parties.

Firefighter Protection

Ensure to wear protective equipment and approach from windward.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin and eyes. Prepare suitable equipment and materials.

Small spill

In a small leakage, absorb and recover by use of soil, sand, sawdust and waste clothes.

Large spill

In a large leakage, cordon off the danger zone, prevent from entering and enclose it with sand bank and stop outflow. Cover liquid surface with foam, and recover liquid into containers.

Environmental

Use appropriate containment to avoid environmental contamination. Prevent from spreading or entering drains, ditches or rivers by using sand, earth, or other appropriate barriers. In event of entering in the sea, extend oil fences to prevent from spreading, and sop up with absorbent materials. Use chemicals and/or detergents, they must satisfy technical standards as set by the Ministry of Land, Infrastructure and Transport / Ministry of the Environment.

Cleanup methods

Absorb and recover by use of soil, sand, sawdust and waste clothes. Recover liquid into containers.

Materials: soil, sand, sawdust and waste clothes

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

NEVER suck up (siphoning) this material by mouth. Wear suitable protect equipment if skin or eye contact may cause. Seal containers hermetically without handling in violent such as falling, dropping, or jolting.

Storage

Keep containers tightly closed and in a cool, well-ventilated place away from direct sunlight. It is recommended to lock up storage area. Use properly labelled and closeable containers. Avoid heat, sparks, open flame and static accumulation.

Hygiene

NEVER suck up (siphoning) this material by mouth.

Fire prevention

Keep away from heat, sparks, open flames, hot objects. No smoking. Take measures against static discharge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Seal or install ventilations for mist occurs.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Semi-solid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Light yellow.
Colour Intensity
---
Form
---
Odor
Characteristic mineral oil
Odor Threshold
---
Ph
Not applicable.
Melting Point
---
Boiling Point
Expected >250°C
Flash Point
≥ 200°C (SETA)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Data not available
Vapor Pressure
Data not available
Vapor Density
Data not available. Expected >1
Relative Density
---
Bulk Density
---
Density
Approx. 0.9g/cm³ (15°C)
Flammability
---
Upper Explosive Limit
Typical 1 - 7 % (V) (based on mineral oil)
Lower Explosive Limit
Typical 1 - 7 % (V) (based on mineral oil)
Explosive Limits
---
Auto Ignition Temperature
Data not available. Expected >320°C
Decomposition Temperature
Data not available
Solubility
Water: Negligible. Other solvents: Data not available
Partition Coefficient
Data not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal condition.

Reactivity

Avoid contact with strong oxidising agent.

Avoid

Avoid contact with halogens, strong acids, alkalis, and oxidizing materials.

Incompatible

Data not available.

Decomposition

Hazardous decomposition products are not expected to form during normal storage. Generates smoke, carbon monoxide, sulfurous acid gas etc. during combustion.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Fish(Fathead minnow, 96h) L50 >100mg/L(3) FL50(Fathead minnow, 14d) NOEL >100mg/L(3) Acute Aquatic Toxicity : Crustacea (Daphnia magna, 48h) EL50 / NOEL > 10,000mg / L(3) Chronic Aquatic Toxicity : Crustacea (Daphnia magna, 21d) NOEL >10mg / L(3) Algae(Pseudokirchneriella subcapitata) NOEL >100mg / L(3) In a static 4-day microorganism luminescence inhibition study, no significant luminescence inhibition was observed. (3)

12.4 Mobility in soil

Not expected to be a hazard.

12.4 Mobility in soil

Generally floats on water. Lubricating oil components have estimated log Koc >3, indicating these components are likely to be adsorbed onto soil and sediment and are not likely to leach to ground water.

Persistence/degradability

Another lubricant base oil was determined to be inherently biodegradable but not readily biodegradable, with a mean degradation of 31% by day 28.

Bioaccumulative Potential

Not available as highly refined base oil.

Hazardous to ozone layer

Not classified because this product not contained substances listed on Montreal Protocol and Ozone Layer Protection Law.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Entrust the industrial waste treatment company who obtained the prefectural governor's permission or municipal corporation.

Disposal

Waste disposal yourself or entrust the industrial waste treatment company who obtained the prefectural governor's permission or municipal corporation. Disposal should be in accordance with applicable regional, national, and local laws and regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

ADR

1 Caution: Flammable. 2 Transport remarkably with containers may not cause friction or agitation. 3 Display signage on vehicle and provide with fire fighting equipment, if and when required to transport more than the specified quantity. Total piled height of vehicle shall be less than 3 meters. 4 Consolidation of this material with dangerous goods belonging to the 1st and 6th Classification is prohibited. 5 Abide by other laws and regulations that are applicable.

IMDG

1 Caution: Flammable. 2 Transport remarkably with containers may not cause friction or agitation. 3 Display signage on vehicle and provide with fire fighting equipment, if and when required to transport more than the specified quantity. Total piled height of vehicle shall be less than 3 meters. 4 Consolidation of this material with dangerous goods belonging to the 1st and 6th Classification is prohibited. 5 Abide by other laws and regulations that are applicable.

IATA

1 Caution: Flammable. 2 Transport remarkably with containers may not cause friction or agitation. 3 Display signage on vehicle and provide with fire fighting equipment, if and when required to transport more than the specified quantity. Total piled height of vehicle shall be less than 3 meters. 4 Consolidation of this material with dangerous goods belonging to the 1st and 6th Classification is prohibited. 5 Abide by other laws and regulations that are applicable.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SHELL ALVANIA GREASE S 1,2,3?

The signal word is no signal word.

What is the physical form of SHELL ALVANIA GREASE S 1,2,3?

SHELL ALVANIA GREASE S 1,2,3 is a semi-solid. with light yellow. color. It has characteristic mineral oil odor.

What is the solubility of SHELL ALVANIA GREASE S 1,2,3?

Water: Negligible. Other solvents: Data not available

What is SHELL ALVANIA GREASE S 1,2,3 used for?

Lubricating grease.

What are the hazard statements for SHELL ALVANIA GREASE S 1,2,3?

This substance has 1 hazard statement:

  • Not classified under GHS criteria.