NextSDS Logo
Safety Data Sheet EN

LOCTITE LB 8008 C5-A

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE LB 8008 C5-A
Synonyms
LOCTITE 8008 C5-A

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Antiseize

Manufacturers & Suppliers

Henkel Ltd logo

Henkel Ltd

manufacturer

Adhesives, Wood Lane End, HP2 4RQ Hemel Hempstead, Great Britain

+44 (1442) 278000

https://mysds.henkel.com/index.html#/appSelection

Emergency Contacts

Emergency Contact

+44 (0)1442 278497

24 Hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS09 - Environmental hazard

GHS09

Hazard Statements

H315 Causes skin irritation.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P273 Avoid release to the environment.
P280 Wear eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with national regulation.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Calcium dihydroxide EC: 215-137-3 1305-62-0 10 - 20% Yes
Copper EC: 231-159-6 7440-50-8 10 - 20% Yes
Quartz (SiO2) "respirable particulates (reaches the alveoli)" (RCS) <0.1% EC: 238-878-4 14808-60-7 1 - 5% No
copper flakes (coated with aliphatic acid) EC: 231-159-6 7440-50-8 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Rinse with running water and soap. Obtain medical attention if irritation persists.

Symptoms: Redness, inflammation.

Eye contact

Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.

Symptoms: Corrosive, may cause permanent damage to eyes (impairment of vision).

Ingestion

Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.

Immediate Medical Attention

See section: Description of first aid measures

Medical Treatment

See section: Description of first aid measures

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

water, carbon dioxide, foam, powder

Unsuitable media

High pressure waterjet

Specific hazards

In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin and eyes. Ensure adequate ventilation. Wear protective equipment.

Small spill

wipe up with paper towel and place in container for disposal.

Large spill

absorb onto inert absorbent material and place in sealed container for disposal.

Environmental

Do not empty into drains / surface water / ground water.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid skin and eye contact. See advice in section 8

Storage

Store at room temperature.

Hygiene

Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Good industrial hygiene practices should be observed.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation/extraction.

Hands

Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.

Eyes

Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.

Respiratory

Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387)

Skin/Body

Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
copper
Colour Intensity
---
Form
paste
Odor
mild
Odor Threshold
---
Ph
Not applicable, Product is non-soluble (in water).
Melting Point
Not applicable, Product is a liquid
Boiling Point
> 100 °C (> 212 °F)
Flash Point
> 93 °C (> 199.4 °F)
Freezing Point
---
Softening Point
---
Solidification Point
< 0 °C (< 32 °F)
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
< 1 hPa (20 °C (68 °F))
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1,3 g/cm3 None (20 °C (68 °F))
Flammability
The product is not flammable.
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
Not applicable, The product is not flammable.
Decomposition Temperature
Not applicable, Substance/mixture is not self-reactive, no organic peroxide and does not decompose under foreseen conditions of use
Solubility
---
Partition Coefficient
Not applicable Mixture
Solubility In Water
Not miscible or difficult to mix (20 °C (68 °F); Solvent: Water)
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not available.
Kinematic Viscosity
> 20,5 mm2/s (40 °C (104 °F); )
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Hazardous reactions

See section reactivity

Avoid

Stable under normal conditions of storage and use.

Incompatible

See section reactivity.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Toxicity (Fish): The mixture is classified based on calculation method referring to the classified substances present in the mixture. The table below presents the data of the classified substances present in the mixture. | Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- |

The mixture is classified based on calculation method referring to the classified substances present in the mixture.

12.1. Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Calcium dihydroxide 1305-62-0 | LC50 | 50,6 mg/l | 96 h | Oncorhynchus mykiss | OECD Guideline 203 (Fish, Acute Toxicity Test) |

12.1. Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Copper 7440-50-8 | LC50 | 0,193 mg/l | 96 h | Pimephales promelas | other guideline: | | Copper 7440-50-8 | NOEC | 0,188 mg/l | 30 d | Perca fluviatilis | OECD Guideline 204 (Fish, Prolonged Toxicity Test: 14-day Study) |

12.1. Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Calcium dihydroxide 1305-62-0 | EC50 | 49,1 mg/l | 48 h | Daphnia magna | OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test) |

12.1. Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Copper 7440-50-8 | EC50 | > 0,1 - 1 mg/l | 48 h | Daphnia magna | OECD Guideline 202 (Daphnia sp. Acute Immobilisation Test) |

12.1. Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Calcium dihydroxide 1305-62-0 | NOEC | 32 mg/l | 14 d | Crangon septemspinosa | OECD Guideline 202 (Daphnia sp. Chronic Immobilisation Test) |

12.1. Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Copper 7440-50-8 | NOEC | > 0,1 - 1 mg/l | 21 d | Daphnia magna | OECD 211 (Daphnia magna, Reproduction Test) |

12.1. Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Calcium dihydroxide 1305-62-0 | EC50 | 184,57 mg/l | 72 h | Pseudokirchneriella subcapitata | OECD Guideline 201 (Alga, Growth Inhibition Test) | | Calcium dihydroxide 1305-62-0 | NOEC | 48 mg/l | 72 h | Pseudokirchneriella subcapitata | OECD Guideline 201 (Alga, Growth Inhibition Test) |

12.1. Toxicity

| Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Copper 7440-50-8 | EC50 | > 0,1 - 1 mg/l | 72 h | not specified | OECD Guideline 201 (Alga, Growth Inhibition Test) | | Copper 7440-50-8 | NOEC | > 0,1 - 1 mg/l | 72 h | not specified | OECD Guideline 201 (Alga, Growth Inhibition Test) |

Toxicity (microorganisms)

The mixture is classified based on calculation method referring to the classified substances present in the mixture. The table below presents the data of the classified substances present in the mixture. | Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | --- | --- | --- | --- | --- | --- |

The mixture is classified based on the calculation method referring to the classified substances present in the mixture.

Toxicity

Toxicity (microorganisms): Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method Calcium dihydroxide 1305-62-0 | EC20 | 229,2 mg/l | 3 h | activated sludge of a predominantly domestic sewage | OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test)

Persistence and degradability

Bioaccumulative potential

Mobility in soil

Results of PBT and vPvB assessment

Endocrine disrupting properties

Other adverse effects

Toxicity

Toxicity (microorganisms): | Hazardous substances CAS-No. | Value type | Value | Exposure time | Species | Method | | Copper 7440-50-8 | EC50 | > 0,1 - 1 mg/l | 3 h | activated sludge | OECD Guideline 209 (Activated Sludge, Respiration Inhibition Test) |

12.2. Persistence and degradability

No substance data available. No data available.

12.3. Bioaccumulative potential

No data available.

12.4. Mobility in soil

No substance data available. No data available.

12.5. Results of PBT and vPvB assessment

The table below presents the data of the classified substances present in the mixture. | Hazardous substances CAS-No. | PBT / vPvB | | --- | --- | | Calcium dihydroxide 1305-62-0 | Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria. | | Copper 7440-50-8 | Not fulfilling Persistent, Bioaccumulative and Toxic (PBT), very Persistent and very Bioaccumulative (vPvB) criteria. | | Quartz (SiO2) "respirable particulates (reaches the alveoli)" (RCS) <0.1% 14808-60-7 | According to Annex XIII to Regulation (EC) No 1907/2006, a PBT and vPvB assessment shall not be conducted for inorganic substances. | | copper flakes (coated with aliphatic acid) 7440-50-8 | According to Annex XIII to Regulation (EC) No 1907/2006, a PBT and vPvB assessment shall not be conducted for inorganic substances. |

12.6. Endocrine disrupting properties

not applicable

12.7. Other adverse effects

No data available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local and national regulations.

Disposal

Dispose of in accordance with local and national regulations.

Waste Codes

14 06 03 Other solvents and solvent mixtures EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Copper)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is LOCTITE LB 8008 C5-A known by?

LOCTITE LB 8008 C5-A is also known as: LOCTITE 8008 C5-A

What is the hazard signal word for LOCTITE LB 8008 C5-A?

The signal word is danger.

What is the physical form of LOCTITE LB 8008 C5-A?

LOCTITE LB 8008 C5-A is a liquid with copper color. It has mild odor.

What is LOCTITE LB 8008 C5-A used for?

Antiseize

What are the hazard statements for LOCTITE LB 8008 C5-A?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of LOCTITE LB 8008 C5-A?

The melting point is Not applicable, Product is a liquid and the boiling point is > 100 °C (> 212 °F).