NextSDS Logo
Safety Data Sheet EN

PD 955 PY SMT-ADHESIVE, 175 G, L1

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PD 955 PY SMT-ADHESIVE, 175 G, L1
Product Code
89950488

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use

Uses advised against

For industrial use only.

Manufacturers & Suppliers

H

Heraeus Electronics GmbH & Co. KG

manufacturer

Heraeusstrasse 12-14 63450 Hanau

+496181350

Emergency Contacts

Emergency Contact

+49 6132-84463

This telephone number is available 24 hours per day, 7 days per week.

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
Skin Sens. Cat. 1 H317
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P261 Avoid breathing mist or vapours.
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ eye protection/ face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

organic

Chemical Name CAS Number Concentration Hazardous
Bisphenol-F-epichlorhydrin-epoxy resin EC: 500-006-8 9003-36-5 30 - 50% Yes
Bis-[4-(2,3-epoxipropoxi)phenyl]propane EC: 216-823-5 1675-54-3 10 - 20% Yes
Titanium dioxide; [in powder form containing 1 % or more of particles with aerodynamic diameter ≤ 10 μm] EC: 236-675-5 13463-67-7 0.1 - 1% Yes
Bisphenol A EC: 201-245-8 80-05-7 0.1 - 0.25% Yes
2,3-Epoxypropyl phenyl ether EC: 204-557-2 122-60-1 0.0025 - 0.025% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Get medical attention.

Skin contact

Take off all contaminated clothing immediately. Wash off with: Polyethylene glycol 400. Obtain medical attention.

Symptoms: Causes skin irritation. May cause an allergic skin reaction.

Eye contact

In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Protect unharmed eye. Call a physician immediately.

Symptoms: Causes serious eye irritation.

Ingestion

Immediately give large quantities of water to drink. Do NOT induce vomiting. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Specific hazards

Exposure to decomposition products may be a hazard to health.

Instructions

Use a water spray to cool fully closed containers.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Follow safe handling advice and personal protective equipment recommendations. Ensure adequate ventilation. Evacuate personnel to safe areas. Refer to protective measures listed in sections 7 and 8.

Environmental

Do not allow contact with soil, surface or ground water. Do not let product enter drains. If the product contaminates rivers and lakes or drains inform respective authorities.

Cleanup methods

soak up with non-combustible absorbent material, sweep up or vacuum up spillage and collect in suitable container for disposal

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)

—

Related Products

Similar products with comparable safety profiles

P

PD 955 PY SMT-ADHESIVE, 13 G, S2

UFI: R406-G066-900Y-X70Q

L

LOCTITE ABLESTIK ATB 120MD6N 20UM X 12", PSA1

---

L

LOCTITE EA 9258.1 EPOXY ADHESIVE APAC

---

U

ULINE S-15802 HEAVY DUTY SPRAY ADHESIVE

CAS: Not Applicable (mixture)

T

TEROSON PV 4010.9 AL ANTI-FLUTTER ADHESIVE DR125KG

---

L

LOCTITE ABLESTIK ATB 107MD3N 12" X 7UM, PSA2

---

L

LOCTITE ABLESTIK ATB 125HA8 12" X 25UM, PSA2

---

L

LOCTITE AQUACE PR-505(1KG)-28KG

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment. Avoid inhalation, ingestion and contact with skin and eyes.

Storage

Keep tightly closed in a dry, cool and well-ventilated place. Keep locked up or in an area accessible only to qualified or authorised persons.

Hygiene

Keep away from food and drink. Wash hands before breaks and at the end of workday. Keep working clothes separately. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Smoking, eating and drinking should be prohibited in the application area.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

local exhaust ventilation

Hands

Before removing gloves clean them with soap and water. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time. As the product is a mixture of several substances, the durability of the glove materials cannot be calculated in advance and has to be tested before use.

Eyes

Safety glasses with side-shields

Respiratory

Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Recommended Filter type: Filter type ABEK-P

Skin/Body

Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
paste
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
yellow
Colour Intensity
---
Form
---
Odor
mild
Odor Threshold
No data available
Ph
substance/mixture is non-soluble (in water)
Melting Point
No data available
Boiling Point
> 200 °C (1.013 hPa)
Flash Point
> 100 °C(1.013 hPa)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
≤ 1.100 hPa (50 °C)
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1,299 g/cm3 (23 °C, 1.013 hPa)
Flammability
Not applicable
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
Not applicable
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
(20 °C, 1,013 hPa) insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
> 40 mm2/s (23 °C); > 20,5 mm2/s (40 °C)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

No dangerous reaction known under conditions of normal use.

Avoid

No data available

Incompatible

No data available

Decomposition

No data available. No hazardous decomposition products are known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Components:

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

Bisphenol-F-epichlorhydrin-epoxy resin: Toxicity to fish: LC50 (Oncorhynchus mykiss (rainbow trout)): 62,5 mg/l Exposure time: 96 h Toxicity to daphnia and other aquatic invertebrates: EC50 (Daphnia magna (Water flea)): > 100 mg/l Exposure time: 48 h Toxicity to algae/aquatic plants: EC50 (Pseudokirchneriella subcapitata (green algae)): > 100 mg/l Exposure time: 72 h Toxicity to microorganisms: IC50: > 100 mg/l Exposure time: 3 h Remarks: Based on data from similar materials Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity): NOEC: 0,3 mg/l Exposure time: 21 d Species: Daphnia magna (Water flea)

12.1 Toxicity

Bis-[4-(2,3-epoxipropoxi)phenyl]propane: Toxicity to fish: LL50 (Oncorhynchus mykiss (rainbow trout)): > 1 - 10 mg/l Exposure time: 96 h Test substance: Water Accommodated Fraction Method: OECD Test Guideline 203 Remarks: Based on data from similar materials Toxicity to daphnia and other aquatic invertebrates: EL50 (Daphnia magna (Water flea)): > 1 - 10 mg/l Exposure time: 48 h Test substance: Water Accommodated Fraction Remarks: Based on data from similar materials Toxicity to algae/aquatic plants: EL50 (Scenedesmus capricornutum (fresh water algae)): > 10 - 100 mg/l Exposure time: 72 h Test substance: Water Accommodated Fraction Remarks: Based on data from similar materials NOELR (Scenedesmus capricornutum (fresh water algae)): > 1 mg/l Exposure time: 72 h Test substance: Water Accommodated Fraction Remarks: Based on data from similar materials Toxicity to microorganisms : IC50 : > 100 mg/l Exposure time: 3 h Remarks: Based on data from similar materials Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) : NOEC: > 0,1 - 1 mg/l Exposure time: 21 d Species: Daphnia magna (Water flea) Remarks: Based on data from similar materials

12.1 Toxicity

Toxicity to fish : LC50 (Oncorhynchus mykiss (rainbow trout)): > 100 mg/l Exposure time: 96 h Method: OECD Test Guideline 203 Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): > 100 mg/l Exposure time: 48 h Toxicity to algae/aquatic plants : EC50 (Skeletonema costatum (marine diatom)): > 10.000 mg/l Exposure time: 72 h Toxicity to microorganisms : EC50 : > 1.000 mg/l Exposure time: 3 h Method: OECD Test Guideline 209

12.1 Toxicity

Toxicity to fish : LC50 (Pimephales promelas (fathead minnow)): 4,6 mg/l Exposure time: 96 h Toxicity to daphnia and other aquatic invertebrates : EC50 : 0,885 mg/l Exposure time: 48 h Method: ISO 14669 and PARCOM method Toxicity to algae/aquatic plants : EC50 (Pseudokirchneriella subcapitata (green algae)): 2,73 mg/l Exposure time: 96 h EC10 (Pseudokirchneriella subcapitata (green algae)): 1,36 mg/l Exposure time: 96 h M-Factor (Acute aquatic toxicity) : 1 Toxicity to microorganisms : EC10 (Pseudomonas putida): > 320 mg/l Exposure time: 18 h Toxicity to fish (Chronic toxicity) : NOEC: 0,000174 mg/l Exposure time: 150 d Species: Danio rerio (zebra fish) Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity): NOEC: 0,0194 mg/l Exposure time: 28 d M-Factor (Chronic aquatic toxicity): 10

12.1 Toxicity

2,3-Epoxypropyl phenyl ether: Toxicity to fish: LC50 (Carassius auratus (goldfish)): 43 mg/l Exposure time: 96 h

12.2 Persistence and degradability

Components: Bisphenol-F-epichlorhydrin-epoxy resin: Biodegradability: Result: Not readily biodegradable. Biodegradation: 0 % Exposure time: 28 d Method: Regulation (EC) No. 440/2008, Annex, C.4-E

Not readily biodegradable.

12.2 Persistence and degradability

Components: Bis-[4-(2,3-epoxipropoxi)phenyl]propane: Biodegradability: Result: Not readily biodegradable. Biodegradation: 5 % Exposure time: 28 d Method: OECD Test Guideline 301F

12.2 Persistence and degradability

Components: Bisphenol A: Biodegradability: Result: Readily biodegradable. Biodegradation: 89 % Exposure time: 28 d Method: OECD Test Guideline 301F

12.2 Persistence and degradability

Biodegradability: Result: Not readily biodegradable. Biodegradation: 51 % Exposure time: 28 d

12.3 Bioaccumulative potential

Components:

12.3 Bioaccumulative potential

Components: Bisphenol-F-epichlorhydrin-epoxy resin: Partition coefficient: n-octanol/water: log Pow: 3,6

12.3 Bioaccumulative potential

Components: Bis-[4-(2,3-epoxipropoxi)phenyl]propane: Partition coefficient: n-octanol/water : log Pow: 3,5

12.3 Bioaccumulative potential

Components: ## Bisphenol A: Bioaccumulation : Species: Cyprinus carpio (Carp) Bioconcentration factor (BCF): 5,1 - 67 Partition coefficient: n-octanol/water : log Pow: 3,4

12.3 Bioaccumulative potential

Components: 2,3-Epoxypropyl phenyl ether: Partition coefficient: n-octanol/water : log Pow: 1,61 Remarks: Calculation

12.4 Mobility in soil

No data available

12.5 Results of PBT and vPvB assessment

Assessment : This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

12.6 Endocrine disrupting properties

Product: Assessment : This substance/mixture contains components considered to have endocrine disrupting properties for environment, according to REACH Article 57(f), Commission Regulation (EU) 2018/605 or Commission Delegated Regulation (EU) 2017/2100. Components: Bisphenol A: Assessment : The substance is considered to have endocrine disrupting properties according to REACH Article 57(f) for the environment.

The product contains components with endocrine disrupting properties for the environment, specifically Bisphenol A.

12.7 Other adverse effects

Global warming potential Assessment Report of the Intergovernmental Panel on Climate Change (IPCC) of the United Nations Framework Convention on Climate Change (UNFCCC) Components: Decamethylcyclopentasiloxane: - 20-year global warming potential: 1,04 - 100-year global warming potential: 0,289 - 500-year global warming potential: 0,082 - Atmospheric lifetime: 0,016 yr - Radiative efficiency: 0,098 Wm2ppb - Further information: Miscellaneous compounds
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

If recycling is not practicable, dispose of in compliance with local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

ADR

When carried in single packaging or inner packaging of 5kg/5L or less, this material is not subject to the transport regulations the single packaging or inner packaging must not be UN-approved but must be a good quality packaging and suitable for the medium.

IMDG

When carried in single packaging or inner packaging of 5kg/5L or less, this material is not subject to the transport regulations the single packaging or inner packaging must not be UN-approved but must be a good quality packaging and suitable for the medium.

IATA

When carried in single packaging or inner packaging of 5kg/5L or less, this material is not subject to the transport regulations the single packaging or inner packaging must not be UN-approved but must be a good quality packaging and suitable for the medium.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PD 955 PY SMT-ADHESIVE, 175 G, L1?

The signal word is warning.

What is the physical form of PD 955 PY SMT-ADHESIVE, 175 G, L1?

PD 955 PY SMT-ADHESIVE, 175 G, L1 is a paste with yellow color. It has mild odor.

What is PD 955 PY SMT-ADHESIVE, 175 G, L1 used for?

Industrial use

What are the hazard statements for PD 955 PY SMT-ADHESIVE, 175 G, L1?

This substance has 4 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of PD 955 PY SMT-ADHESIVE, 175 G, L1?

The melting point is No data available and the boiling point is > 200 °C (1.013 hPa).