Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BIRAL T&D (FLUID)
- Product Form
- Mixture
- Product Code
- 08
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
No additional information available
Manufacturers & Suppliers
Biral Lubricants Norway AS
manufacturer
Pb. 35, N-1300 Sandvika, NORWAY
+47 67 56 50 00
http://www.biralube.com
Emergency Contacts
National Poisons Information Service (Newcastle Unit)
+44 191 2606182
24hrs
National Poisons Information Service (Newcastle Unit)
+44 191 2606180
24hrs
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mineral oil (CAS-no. 64742-52-5 and CAS-no. 64742-53-6) (Note L) | --- | 60 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow affected person to breathe fresh air. Allow the patient to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Symptoms: Prolonged or repeated skin contact with the material will remove natural oils which leads to a dermatitis.
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.
Symptoms: Liquid splashes in the eye may cause irritation.
Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor.
Symptoms: May be fatal if swallowed and enters airways.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing media appropriate for surrounding fire. Foam. Dry powder. Carbon dioxide.
Do not use a heavy water stream.
Non flammable.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper personal protective equipment, including respiratory protection (EN137).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area. Evacuate unnecessary personnel. Ventilate area.
Prevent entry to sewers and public waters.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes.
Store in a well-ventilated place. Keep cool. Keep container closed when not in use.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that there is a suitable ventilation system. Emergency eye wash fountains should be available in the immediate vicinity of any potential exposure.
Wear protective gloves. Nitrile rubber gloves. Polyvinylalcohol (PVA). Layer thickness : 0,2 - 0,4 mm. Breakthrough time : 6 (> 480 minutes). STANDARD EN ISO 374-1:2016/A1:2018, EN ISO 374-2:2019, EN ISO 374-4:2019
Use splash goggles when eye contact due to splashing is possible. STANDARD EN 166:2001
Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. Use respiratory equipment with combination filter, type AX/P2. STANDARD: EN 140 / EN 141 / EN 136 / EN 143 / EN 405 / EN 137 / EN 147. EN 136/140/145. EN 405
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable when used at recommended storage and handling conditions.
None to our knowledge.
Pressurised container: May burst if heated.
Extreme risk of explosion by shock, friction, fire or other sources of ignition.
alkalis.
No decomposition if stored and used normally.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The product is not classified as hazardous to the aquatic environment, both short-term and long-term.
12.1. Toxicity
12.3. Bioaccumulative potential
12.4. Mobility in soil
The substance is insoluble in water.
12.5. Results of PBT and vPvB assessment
The substance/mixture does not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6. Endocrine disrupting properties
Based on available data, the classification criteria are not met
12.7. Other adverse effects
Avoid release to the environment.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not discharge into drains.
Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Contains no REACH substances with Annex XVII restrictions, no substance on the REACH candidate list, no REACH Annex XIV substances, no substance subject to Regulation (EU) No 649/2012, and no substance subject to Regulation (EU) No 2019/1021.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BIRAL T&D (FLUID)?
The signal word is no signal word.
What is the physical form of BIRAL T&D (FLUID)?
BIRAL T&D (FLUID) is a liquid appearing as grease. with pale yellow. color. It has hydrocarbon. odor.
What is the solubility of BIRAL T&D (FLUID)?
Insoluble in water. soluble in most organic solvents.
What is BIRAL T&D (FLUID) used for?
Lubricant
What is the melting point of BIRAL T&D (FLUID)?
The melting point is Not determined. and the boiling point is 260 °C.