Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SF 7471 ACTIVATOR
- Synonyms
- LOCTITE 7471 PRIMER 133ML AU
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Primer
Manufacturers & Suppliers
Henkel Australia Pty Ltd
manufacturer
135-141 Canterbury Road, Kilsyth, Victoria, 3137, Australia
+61 (3) 9724 6444
Emergency Contacts
Emergency Contact
1800 032 379
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours. Seek medical advice.
Remove contaminated clothing and footwear. Wash with soap and water. Seek medical advice. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical advice.
Do not induce vomiting. Have victim rinse mouth thoroughly with water. Seek medical advice.
Immediate Medical Attention
Seek medical advice.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Carbon dioxide, Dry chemical.
Water spray jet
WARNING FLAMMABLE! Contents under pressure. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat. Do not puncture or incinerate pressurized containers.
Use water spray to keep fire exposed containers cool and disperse vapors.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe solvent vapors. Ensure adequate ventilation.
Ventilate area. Remove all sources of ignition. Do not let product enter drains.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing vapors or mists of this product. Avoid contact with eyes, skin and clothing. Keep away from heat, spark and flame. Vapors will accumulate readily and may ignite explosively. Ensure adequate ventilation.
Do not handle or store near an open flame, heat or other sources of ignition. Do not puncture, incinerate, or expose to temperatures above 48.9 °C (120 °F). Keep away from heat and direct sunlight. Ensure adequate ventilation.
Keep away from heat, spark and flame. Do not handle or store near an open flame, heat or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of temperature and pressure.
Will not occur.
Keep away from heat, spark and flame. Do not puncture, incinerate, or expose to temperatures above 48.9 °C (120 °F).
Strong oxidizing agents.
Thermal decomposition can lead to release of irritating gases and vapors. carbon monoxide, carbon dioxide, Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE SF 7471 ACTIVATOR known by?
LOCTITE SF 7471 ACTIVATOR is also known as: LOCTITE 7471 PRIMER 133ML AU
What is the hazard signal word for LOCTITE SF 7471 ACTIVATOR?
The signal word is danger.
What is the physical form of LOCTITE SF 7471 ACTIVATOR?
LOCTITE SF 7471 ACTIVATOR is a aerosol appearing as amber, yellow with amber, yellow color. It has acetone odor.
What is LOCTITE SF 7471 ACTIVATOR used for?
Primer
What are the hazard statements for LOCTITE SF 7471 ACTIVATOR?
This substance has 6 hazard statements:
- EUH066: Repeated exposure may cause skin dryness or cracking.
- H222: Extremely flammable aerosol.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H401: Toxic to aquatic life.
- H412: Harmful to aquatic life with long lasting effects.