NextSDS Logo
Safety Data Sheet EN

Master Mechanic Bar & Chain Oil

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Master Mechanic Bar & Chain Oil
Product Code
624105444
Synonyms
Lubricating oil

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

C

CITGO Petroleum Corporation

manufacturer

P.O. Box 4689 Houston, TX 77210

Emergency Contacts

Technical Contact

(800) 248-4684

Medical Emergency

(832) 486-4700

CHEMTREC Emergency

(800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

No known significant effects or critical hazards.

Precautionary Statements

P301 + P330 + P331 IF SWALLOWED: Do not induce vomiting.
P351 IF IN EYES: Rinse cautiously with water for several minutes.
P401 Store in accordance with all local, regional, national and international regulations.
P402 + P404 Store in a dry place and/or in closed container.
Avoid contact with eyes, skin and clothing.
May be harmful if swallowed.
After handling, always wash hands thoroughly with soap and water.
If you feel unwell, seek medical attention and show the label when possible.
Dispose of contents and container in accordance with all local, regional, national and international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Lubricating oil

Chemical Name CAS Number Concentration Hazardous
Distillates (petroleum), hydrotreated heavy paraffinic 64742-54-7 50 - 75% No
Distillates (petroleum), solvent-refined heavy paraffinic 64741-88-4 10% No
Distillates (petroleum), solvent-dewaxed heavy paraffinic 64742-65-0 3% No
Residual oils (petroleum), solvent-dewaxed 64742-62-7 3% No
C9-C15 Cycloalkanes --- 3% No

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. Occupational exposure limits, if available, are listed in Section 8.

Notes

Any concentration shown as a range is to protect confidentiality or is due to batch variation.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur.

Symptoms: No known significant effects or critical hazards. No specific data.

Skin contact

Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.

Symptoms: No known significant effects or critical hazards. No specific data.

Eye contact

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.

Symptoms: No known significant effects or critical hazards. No specific data.

Ingestion

Wash out mouth with water. Remove victim to fresh air and keep at rest in a position comfortable for breathing. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.

Symptoms: No known significant effects or critical hazards. No specific data.

Immediate Medical Attention

Get medical attention if symptoms occur. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.

Medical Treatment

Treat symptomatically. Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use an extinguishing agent suitable for the surrounding fire.

Unsuitable media

None known.

Specific hazards

In a fire or if heated, a pressure increase will occur and the container may burst.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective equipment.

Small spill

Stop leak if without risk. Move containers from spill area. Absorb with an inert material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose of via a licensed waste disposal contractor.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).

Cleanup methods

Absorb with an inert material and place in an appropriate waste disposal container.

Materials: inert material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see Section 8).

Storage

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Amber to dark amber
Colour Intensity
---
Form
---
Odor
Petroleum.
Odor Threshold
---
Ph
Not available.
Melting Point
---
Boiling Point
Not available.
Flash Point
Closed cup: >177°C (>350.6°F) [Pensky-Martens.]
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
<1 (n-butyl acetate. = 1)
Vapor Pressure
<0.013 kPa (<0.1 mm Hg) [room temperature]
Vapor Density
>1 [Air = 1]
Relative Density
0.89
Bulk Density
---
Density
Estimated 7.42 lbs/gal
Flammability
---
Upper Explosive Limit
7%
Lower Explosive Limit
1%
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
Insoluble in the following materials: cold water.
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Kinematic (40°C (104°F)): 0.68 cm²/s (68 cSt)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

Not expected to be Explosive, Self-Reactive, Self-Heating, or an Organic Peroxide under US GHS Definition(s).

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

No specific data.

Incompatible

No specific data.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

Not available.

Not available.

Persistence and degradability

Conclusion/Summary : Not available.

Not available.

Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | --- | --- | --- | --- |

Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | Distillates (petroleum), solvent-refined heavy paraffinic | 3.9 to 6 | - | high |
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

Disposal

The generation of waste should be avoided or minimized wherever possible. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

This material is classified as an oil under Section 311 of the Clean Water Act (CWA) and the Oil Pollution Act of 1990 (OPA). Discharges or spills which produce a visible sheen on waters of the United States, their adjoining shorelines, or into conduits leading to surface waters must be reported to the EPA's National Response Center at (800) 424-8802.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Master Mechanic Bar & Chain Oil known by?

Master Mechanic Bar & Chain Oil is also known as: Lubricating oil

What is the hazard signal word for Master Mechanic Bar & Chain Oil?

The signal word is no signal word.

What is the physical form of Master Mechanic Bar & Chain Oil?

Master Mechanic Bar & Chain Oil is a liquid. with amber to dark amber color. It has petroleum. odor.

What is the solubility of Master Mechanic Bar & Chain Oil?

Insoluble in the following materials: cold water.

What are the hazard statements for Master Mechanic Bar & Chain Oil?

This substance has 1 hazard statement:

  • No known significant effects or critical hazards.