Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEMPERKOTE® 1000HSA 30 BLACK
- Chemical Name
- SILICONE, AROMATIC SOLVENT
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
HOT SURFACE INDUSTRIAL HI-HEAT® COATING
Manufacturers & Suppliers
FLAME CONTROL COATINGS LLC
manufacturer
4120 HYDE PARK BLVD. NIAGARA FALLS, N.Y. 14305
Emergency Contacts
Emergency Contact
800-535-5053
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| TALC | 014807-96-6 | 10 - 30% | Yes |
| COPPER CHROMITE BLACK SPINEL** | 013463-67-7 | 10 - 30% | Yes |
| PARACHLOROBENZOTRIFLOURIDE | 000098-56-6 | 7 - 15% | Yes |
| MICA | 012001-26-2 | 5 - 10% | Yes |
| AROMATIC PETROLEUM DISTILLATES | 064742-95-6 | 1 - 5% | Yes |
| HEAVY AROMATIC SOLVENT NAPTHA | 064742-94-5 | 1 - 5% | Yes |
| TOLUENE | 000108-88-3 | 1 - 5% | Yes |
| DIISOPROPYLBIPHENYLS | 069009-90-1 | 1 - 5% | Yes |
| ETHYL SILICATE | 000078-10-4 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
MOVE TO FRESH AIR. GIVE ASSISTED RESPIRATION IF BREATHING HAS STOPPED OR IS LABORED (CALL A PHYSICIAN).
REMOVE PRODUCT AND FLUSH AFFECTED AREA WITH WATER FOR 15 MINUTES. IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION.
FLUSH WITH WATER FOR 15 MINUTES. GET MEDICAL ATTENTION.
GIVE 3 – 4 GLASSES OF WATER OR MILK IF PERSON CONSCIOUS. DO NOT INDUCE VOMITING! OBTAIN MEDICAL CARE AND TREATMENT.
Immediate Medical Attention
GET MEDICAL ATTENTION (EYES); SEEK MEDICAL ATTENTION (SKIN); CALL A PHYSICIAN (INHALATION); OBTAIN MEDICAL CARE AND TREATMENT (INGESTION).
Medical Treatment
TREAT SYMPTOMATICALLY.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, OR ALCOHOL FOAM.
FLAMABLE LIQUID AND VAPOR. IN A FIRE OR IF HEATED A PRESSURE INCREASE WILL OCCUR AND THE CONTAINER MAY BURST, WITH THE RISK OF A SUBSEQUENT EXPLOSION. VAPOR IS HEAVIER THAN AIR AND WILL SPREAD ACROSS THE GROUND.
WATER SPRAY IS USEFUL IN COOLING FIRE-EXPOSED VESSELS AND IN DISPERSING VAPORS.
Firefighter Protection
WEAR SELF-CONTAINED BREATHING APPARATUS AND PROTECTIVE CLOTHING.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
SHUT OFF SOURCES OF IGNITION. COVER SPILLS WITH ABSORBENT. PLACE IN METAL CONTAINERS FOR RECOVERY OR DISPOSAL. PREVENT ENTRY INTO SEWERS, STORM DRAINS, AND WATERWAYS.
PREVENT ENTRY INTO SEWERS, STORM DRAINS, AND WATERWAYS.
PLACE IN METAL CONTAINERS FOR RECOVERY OR DISPOSAL
Materials: METAL CONTAINERS
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
STORE IN COOL, WELL VENTILATED AREAS. KEEP AWAY FROM HEAT AND OPEN FLAMES. AVOID PROLONGED INHALATION OF HEATED VAPORS OR MISTS. AVOID PROLONGED SKIN CONTACT. USE NON-SPARKING TOOLS AND GROUNDING CABLES WHEN TRANSFERRING. CONTAINERS MAY BE HAZARDOUS WHEN EMPTY.
AVOID TEMPERATURE EXTREMES. STORE AWAY FROM EXCESSIVE HEAT, FROM SOURCES OF IGNITION AND FROM REACTIVE MATERIALS. STORE OUT OF DIRECT SUNLIGHT IN A COOL PLACE. KEEP CONTAINERS TIGHTLY CLOSED. GROUND ALL METAL CONTAINERS DURING STORAGE AND HANDLING.
KEEP AWAY FROM HEAT AND OPEN FLAMES. USE NON-SPARKING TOOLS AND GROUNDING CABLES WHEN TRANSFERRING. MATERIAL CAN BURN; LIMIT INDOOR STORAGE TO AREAS EQUIPPED WITH AUTOMATIC SPRINKLERS.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
STABLE; HOWEVER MAY FORM PEROXIDES OF UNKNOWN STABILITY
MAY FORM PEROXIDES OF UNKNOWN STABILITY
NOT APPLICABLE (MATERIAL IS STABLE).
OXIDIZING AGENTS (PERCHLORATES, NITRATES), STRONG ACIDS, HYPOCHLORITES, AND PEROXIDES SHOULD NOT BE COMBINED WITH PHOSPHOROUS CONTAINING MATERIALS
HIGHLY TOXIC FUMES CAN BE EMITTED IN A FIRE SITUATION
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incineration is preferred.
Comply with all federal, state and local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEMPERKOTE® 1000HSA 30 BLACK?
The signal word is danger.
What is the physical form of TEMPERKOTE® 1000HSA 30 BLACK?
TEMPERKOTE® 1000HSA 30 BLACK is a liquid with black color. It has aromatic solvent odor.
What is TEMPERKOTE® 1000HSA 30 BLACK used for?
HOT SURFACE INDUSTRIAL HI-HEAT® COATING
What are the hazard statements for TEMPERKOTE® 1000HSA 30 BLACK?
This substance has 8 hazard statements:
- H226: FLAMMABLE LIQUID AND VAPOR
- H242: VAPOR MAY CAUSE FLASH FIRE
- H301: HARMFUL OR FATAL IF SWALLOWED
- H312: MAY BE HARMFUL IF ABSORBED THROUGH SKIN
- H332: HARMFUL IF INHALED
- H335: CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION
- H350: CONTAINS MATERIAL WHICH CAN CAUSE CANCER
- H351: POSSIBLE CANCER HAZARD
What is the melting point of TEMPERKOTE® 1000HSA 30 BLACK?
The melting point is ND and the boiling point is 110.6°C (231.1°F) (TOLUENE).