Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EPO-TEK® H77 Black Part A
- Product Code
- H77 Black/A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive.
Manufacturers & Suppliers
Epoxy Technology, Inc.
manufacturer
14 Fortune Drive, Billerica, MA 01821, USA
(978) 667-3805
www.epotek.com
Emergency Contacts
Emergency Contact
+1 (800) 255-3924
Emergency Contact
+1 (813) 248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Epoxy Resin Blend | --- | 10 - 30% | Yes |
| Reactive Diluent | --- | 5 - 10% | Yes |
The full text for all hazard statements is displayed in Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air at once. Rinse nose and mouth with water. Get medical attention if any discomfort continues.
Symptoms: Inhalation of dusts during cutting, grinding or sanding of this product may cause irritation of the respiratory tract.
Remove affected person from source of contamination. Remove contaminated clothing. Wash skin thoroughly with soap and water. Get medical attention if irritation persists after washing.
Symptoms: Skin irritation. Allergic rash.
Remove affected person from source of contamination. Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15 minutes and get medical attention.
Symptoms: Causes serious eye damage.
Never give anything by mouth to an unconscious person. Do not induce vomiting. Rinse mouth thoroughly with water. Get medical attention if any discomfort continues.
Symptoms: May cause discomfort if swallowed.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemicals. Foam. Carbon dioxide (CO2).
Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.
Avoid breathing fire gases or vapors. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.
Firefighter Protection
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective clothing as described in Section 8 of this safety data sheet.
Do not discharge into drains or watercourses or onto the ground. Avoid release to the environment.
Absorb in vermiculite, dry sand or earth and place into containers. Flush contaminated area with plenty of water.
Materials: vermiculite, dry sand or earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid spilling. Avoid contact with skin and eyes. Keep away from heat, sparks and open flame. Do not eat, drink or smoke when using the product. Avoid inhalation of vapors.
Store at room temperature. Keep container tightly sealed when not in use.
Do not eat, drink or smoke when using the product.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate general and local exhaust ventilation.
It is recommended that chemical-resistant, impervious gloves are worn.
The following protection should be worn: Chemical splash goggles.
If ventilation is inadequate, suitable respiratory protection must be worn.
Wear appropriate clothing to prevent any possibility of skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures.
The following materials may react with the product: Strong oxidizing agents. Strong reducing agents.
Will not polymerize.
Avoid excessive heat for prolonged periods of time. Avoid heat, flames and other sources of ignition.
Strong oxidizing agents. Strong reducing agents.
Fire creates: Carbon monoxide (CO). Carbon dioxide (CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable.
- Shipping Name
- Not applicable.
- Transport Class
- No transport warning sign required.
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Proprietary information protected pursuant to WTO's Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS), Section 7, Art. 39.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EPO-TEK® H77 Black Part A?
The signal word is danger.
What is the physical form of EPO-TEK® H77 Black Part A?
EPO-TEK® H77 Black Part A is a paste appearing as paste with black color. It has mild odor.
What is the solubility of EPO-TEK® H77 Black Part A?
Slightly soluble in water.
What is EPO-TEK® H77 Black Part A used for?
Adhesive.
What are the hazard statements for EPO-TEK® H77 Black Part A?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H412: Harmful to aquatic life with long lasting effects.