Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CRUDE GLYCERIN
- Chemical Name
- glycerol
Regulatory Identifiers
- CAS Number
- 56-81-5 Check regulations →
- EC Number
- 200-289-5 Check regulations →
Identified Uses
Crude glycerine for refining and feed use
Uses advised against
The product should not be used in ways other than those referred in Section 1.
Manufacturers & Suppliers
Commodity Trading s.r.o.
Daskabát 27, Daskabát, 77900, Czech Republic
+420 603 822 991
ENVI GROUP s.r.o
Emergency Contacts
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| substance main component glycerol EC: 200-289-5 | 56-81-5 | 80% | No |
Full text of all classifications and hazard statements is given in Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim to fresh air, keep him calm and warm. In case of problems, consult a doctor.
Remove contaminated clothing. Wash the affected area thoroughly with soap and water. If problems persist, see a doctor.
Immediately flush eyes with water for approximately 10–15 minutes, holding eyes open. If contact lenses are worn, remove them immediately and continue rinsing. If symptoms persist, seek medical attention.
Never give anything by mouth to an unconscious person. Do not induce vomiting. If the person is conscious, rinse mouth and give 2–4 cups of lukewarm water to drink. If symptoms persist, seek medical attention.
Immediate Medical Attention
Special means are not intended.
Medical Treatment
Treatment is symptomatic.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, carbon dioxide, powder, water spray. Adapt to surrounding conditions. In case of extensive fire, foam for polar liquids or flooding with water spray is recommended.
Water - full jet.
Contact with strong oxidizing agents (nitric acid, chromium oxide, potassium chlorate or potassium permanganate) may cause explosion.
Firefighter Protection
Complete protective equipment for firefighters with self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
If there is no danger, stop the leak. Keep bystanders out of the danger area.
Prevent soil contamination and release into surface or groundwater.
Collect the leaked material using a suitable non-combustible sorbent
Materials: sand, diatomaceous earth, earth and other suitable absorbent materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation at the workplace. Wear personal protective equipment (see section 8). Avoid contact with eyes and skin. Avoid breathing vapours/aerosols. Do not eat, drink or smoke when using the product. Wash hands after use. Take off contaminated clothing and wash before reuse.
Store in tightly closed containers in a cool, dry and well-ventilated area.
Do not eat, drink or smoke when using the product. Wash hands after use. Take off contaminated clothing and wash before reuse.
Keep away from sources of heat and ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure sufficient extraction and ventilation of the operation (for glycerine less than .10 mg/m³).
Protective gloves resistant to the product. When choosing appropriate thickness, material and permeability of the gloves, observe recommendations of their particular manufacturer.
Use safety glasses if there is a risk of eye contact.
Halfmask with a filter against organic vapors or a self-contained breathing apparatus as appropriate if exposure limit values of substances are exceeded or in a poorly ventilated environment.
Observe measures for protection of the environment, see Section 6.2.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The substance is stable at normal pressure and temperature.
The substance is stable at normal pressure and temperature.
Hazardous polymerization does not occur.
high temperatures, potential sources of ignition and incompatible substances
potassium permanganate (explosive reactions), strong oxidizing agent, strong acids, bases, metal oxides, reducing agents, chlorine (explosive reaction), etc.
Thermal decomposition produces carbon oxides, acrolein, toxic and irritating gases and fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Based on available data the classification criteria are not met.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
Based on available data the classification criteria are not met. Does not contain any PMT or vPvM components.
12.5. Results of PBT and vPvB assessment
The substance does not meet the criteria for PBT or vPvB classification.
12.6. Endocrine disrupting properties
Based on available data the classification criteria are not met. Does not contain any components that may cause endocrine disruption in the environment.
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Any unused product and contaminated packaging should be put in labelled containers for waste collection and submitted for disposal to a person authorised for waste removal (a specialized company) that is entitled for such activity.
Any unused product should be put in labelled containers for waste collection and submitted for disposal to a person authorised for waste removal (a specialized company) that is entitled for such activity.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulation (EC) No. 1907/2006 (REACH), Regulation (EC) No. 1272/2008 (CLP), and Commission Regulation (EU) 2020/878.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CRUDE GLYCERIN?
The signal word is no signal word.
What is the physical form of CRUDE GLYCERIN?
CRUDE GLYCERIN is a liquid with brown color. It has slight odor or no odor odor.
What is the solubility of CRUDE GLYCERIN?
Soluble in alcohol, ethyl acetate, ether. Insoluble in chloroform, benzene, tetrachloride, carbon disulfide, oils, etc.
What is CRUDE GLYCERIN used for?
Crude glycerine for refining and feed use
What is the melting point of CRUDE GLYCERIN?
The melting point is 18 °C and the boiling point is >288 °C.