Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium borate, 0.5M buffer solution, pH 8.5
- Product Code
- J62902
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 40Q2-KGY2-5N4Y-QKAH
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Alfa Aesar
manufacturer
Shore Road, Port of Heysham Industrial Park, Heysham, Lancashire LA3 2XY, United Kingdom
+44 (0) 1524 850506
http://www.alfa.com
Emergency Contacts
Carechem 24
+44 (0) 1865 407333
Carechem 24
+44 (0) 1235 239670
National Poisons Information Centre (NPIC)
01 809 2166
8am-10pm, 7 days a week
Emergency Contact
+356 2395 2000
Emergency Contact
+357 2240 5611
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Clean mouth with water and drink afterwards plenty of water.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not combustible.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment as required.
Should not be released into the environment.
Soak up with inert absorbent material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Buffer solution pH 8 (borate) Traceable to NIST
UFI: EHPA-P2EM-XX0C-VAS8
Buffer Solution (Borate) pH 10 Blue
---
Buffer solution pH 10 (borate) Traceable to NIST
UFI: QSPA-62GT-UX0U-VCHF
Buffer Solution, pH 7.00
---
Buffer Solution, pH 10.00
---
Buffer Solution pH 7.00
---
Buffer Solution, pH 4.00
---
Buffer solution (borate buffer) pH 9 (20°C), blue coloured ± 0.02 pH-units AVS TITRINORM®
CAS: 00-00-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Ensure adequate ventilation. Do not get in eyes, on skin, or on clothing. Avoid ingestion and inhalation.
Keep container tightly closed in a dry and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are close to the workstation location. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source
Protective gloves. Glove material: Natural rubber, Nitrile rubber, Neoprene, PVC. Breakthrough time: See manufacturers recommendations. EU standard: EN 374. (minimum requirement)
Goggles (European standard - EN 166)
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced Recommended Filter type: Multi-purpose/ABEK conforming to EN14387 Particulates filter conforming to EN 143. Small scale/Laboratory use: Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended half mask:- Particle filtering: EN149:2001 When RPE is used a face piece Fit Test should be conducted
Long sleeved clothing
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
Hazardous Polymerization: No information available. Hazardous Reactions: None under normal processing.
Incompatible products. Excess heat.
None known.
Oxides of boron. Sodium oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
Miscible with water, Persistence is unlikely, based on information available.
12.3. Bioaccumulative potential
Bioaccumulation is unlikely
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with the European Directives on waste and hazardous waste. Dispose of in accordance with local regulations.
Waste is classified as hazardous.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium borate, 0.5M buffer solution, pH 8.5?
The signal word is danger.
What is the physical form of Sodium borate, 0.5M buffer solution, pH 8.5?
Sodium borate, 0.5M buffer solution, pH 8.5 is a liquid . It has no information available odor.
What is Sodium borate, 0.5M buffer solution, pH 8.5 used for?
Laboratory chemicals.
What are the hazard statements for Sodium borate, 0.5M buffer solution, pH 8.5?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation
- H360FD: May damage fertility. May damage the unborn child
What is the melting point of Sodium borate, 0.5M buffer solution, pH 8.5?
The melting point is No data available and the boiling point is No information available.