Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MAPSIL® 213 - B (H) - 0.020 KG - 0.050 KG
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
See the Technical Data Sheet of the product.
Uses advised against
Any use not described in the Technical Data Sheet of the product.
Manufacturers & Suppliers
MAP SPACE COATINGS S.A.S.
manufacturer
ZI de Bonzom 1 rue Paul MAES 09270 MAZERES - FRANCE
+33 5 34 01 27 00
Emergency Contacts
National Poisons Information Service (NPIS)
(+44) 844 892 0111
National Poisons Information Service (NPIS)
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Poly(dimethylsiloxane-co-méthylhydrosiloxane), triméthylsilyl terminated | 68037-59-2 | 30 - 40% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of inhalation, consult a doctor immediately and show him packing or label.
Immediately take off all contaminated clothing. Areas of the body that have - or are only even suspected of having - come into contact with the product must be rinsed immediately with plenty of running water and possibly with soap. Wash thoroughly the body (shower or bath). Remove contaminated clothing immediately and dispose off safely. After contact with skin, wash immediately with soap and plenty of water.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an ophthalmologist immediately. Protect uninjured eye.
Do not under any circumstances induce vomiting.
Immediate Medical Attention
OBTAIN A MEDICAL EXAMINATION IMMEDIATELY. Consult an ophthalmologist immediately after eye contact. Consult a doctor immediately after inhalation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Sprayed(Pulverized) water or fog of water, Foam, Powder BC, Multi-purpose(Versatile) powders ABC
Do not inhale explosion and combustion gases. Burning produces heavy smoke.
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment. Wear breathing apparatus if exposed to vapours/dusts/aerosols. Provide adequate ventilation. Use appropriate respiratory protection.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
Wash with plenty of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes, inhalation of vapours and mists. Don't use empty container before they have been cleaned. Before making transfer operations, assure that there aren't any incompatible material residuals in the containers. See also section 8 for recommended protective equipment.
Adequately ventilated premises.
Contaminated clothing should be changed before entering eating areas. Do not eat or drink while working.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use protective gloves that provides comprehensive protection, e.g. P.V.C., neoprene or rubber.
Use close fitting safety goggles, don't use eye lens.
Use respiratory protection where ventilation is insufficient or exposure is prolonged.
Use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Stable under normal conditions
Stable under normal conditions.
None in particular.
The decomposition by the heat can cause(provoke) the irritating release(clearance) of gas and vapors. Carbon dioxide, Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
N.A.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6. Endocrine disrupting properties
No endocrine disruptor substances present in concentration >= 0.1%
12.7. Other adverse effects
No other adverse effects are reported.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recover if possible. In so doing, comply with the local and national regulations currently in force.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MAPSIL® 213 - B (H) - 0.020 KG - 0.050 KG?
The signal word is warning.
What is the physical form of MAPSIL® 213 - B (H) - 0.020 KG - 0.050 KG?
MAPSIL® 213 - B (H) - 0.020 KG - 0.050 KG is a liquid with n.a. color. It has not available odor.
What is MAPSIL® 213 - B (H) - 0.020 KG - 0.050 KG used for?
See the Technical Data Sheet of the product.
What are the hazard statements for MAPSIL® 213 - B (H) - 0.020 KG - 0.050 KG?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of MAPSIL® 213 - B (H) - 0.020 KG - 0.050 KG?
The melting point is Not available and the boiling point is > 93 °C.