Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MAPSIL® 213 (B) - 0.200 KG
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
See the Technical Data Sheet of the product.
Uses advised against
Any use not described in the Technical Data Sheet of the product.
Manufacturers & Suppliers
MAP SPACE COATINGS S.A.S.
manufacturer
ZI de Bonzom 1 rue Paul MAES 09270 MAZERES - FRANCE
+33 5 34 01 27 00
Emergency Contacts
National Poisons Information Service (NPIS)
(+44) 844 892 0111
National Poisons Information Service (NPIS)
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
Wash with plenty of water and soap.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Do not under any circumstances induce vomiting.
Immediate Medical Attention
OBTAIN A MEDICAL EXAMINATION IMMEDIATELY.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Sprayed (Pulverized) water or fog of water, Foam, Powder BC, Multi-purpose (Versatile) powders ABC
Do not inhale explosion and combustion gases. Burning produces heavy smoke.
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Use suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear personal protection equipment. Remove persons to safety. See protective measures under point 7 and 8.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
Wash with plenty of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes, inhalation of vapours and mists.
Do not eat or drink while working.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not needed for normal use.
Not needed for normal use. Anyway, operate according good working practices.
Not needed for normal use.
No special precaution must be adopted for normal use.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Stable under normal conditions
Stable under normal conditions.
None in particular.
The decomposition by the heat can cause(provoke) the irritating release(clearance) of gas and vapors. Carbon dioxide, Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
N.A.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6. Endocrine disrupting properties
No endocrine disruptor substances present in concentration >= 0.1%
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recover if possible. In so doing, comply with the local and national regulations currently in force.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MAPSIL® 213 (B) - 0.200 KG?
The signal word is no signal word.
What is the physical form of MAPSIL® 213 (B) - 0.200 KG?
MAPSIL® 213 (B) - 0.200 KG is a liquid with transparent color. It has inodore / odorless odor.
What is MAPSIL® 213 (B) - 0.200 KG used for?
See the Technical Data Sheet of the product.
What is the melting point of MAPSIL® 213 (B) - 0.200 KG?
The melting point is Not available and the boiling point is > 93 °C.