Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NeoMass AAAC 3.0
- Product Code
- 7100120, 3467421, 3467426, 3467411, 3462450, 3462460, 3462470, 3462480
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For in vitro diagnostic use only. This NeoMass AAAC 3.0 kit is for the quantitative measurement of amino acids, acylcarnitines, argininosuccinic acid, succinylacetone, lysophospholipid and nucleoside in blood samples dried on filter paper as a primary test for screening of babies for metabolic disorders.
Manufacturers & Suppliers
Labsystems Diagnostics
Tillitie 3, FIN-01720 Vantaa
http://www.labsystemsdx.com
Emergency Contacts
Emergency Contact
112
Poison information center
09-471997
Poison information center
09-4711
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
Flush eyes with water as a precaution
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Immediate Medical Attention
Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, dry chemical, carbon dioxide or appropriate foam to extinguish fire. Use firefighting measures that suit the environment.
Carbon oxides
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear respiratory protection. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Prevent further leakage or spillage if safe to do so.
collect with an electrically protected vacuum cleaner or by wet-brushing and place it in a container for disposal according to local regulations.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep the reagents stored in a cold place. Keep container tightly closed in a dry and well-ventilated place.
Keep away from sources of ignition - No smoking. Take measures to prevent the build-up of electrostatic charge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Safety gloves recommended
Protective goggles recommended
Lab coat recommended
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable
No specific test data related to reactivity available for this product or its ingredients.
Under normal conditions of storage and use, hazardous reactions will not occur
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not allow vapor to accumulate in low or confined areas.
oxidizing materials, reducing materials, metals, acids and alkalis
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The disposal should be carried out according to the existing local laws and the existing local regulation governing water pollution.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1230, UN1648
- Shipping Name
- Methanol, Acetonitrile
- Transport Class
- Methanol: 3 (6.1), Acetonitrile: 3
- Packing Group
- II
Warning: Flammable liquids
Warning: Flammable liquids
Warning: Flammable liquids
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NeoMass AAAC 3.0?
The signal word is warning.
What is the physical form of NeoMass AAAC 3.0?
NeoMass AAAC 3.0 is a liquid appearing as liquid . It has characteristic odor.
What is the solubility of NeoMass AAAC 3.0?
Soluble in the following materials: cold water and hot water
What is NeoMass AAAC 3.0 used for?
For in vitro diagnostic use only. This NeoMass AAAC 3.0 kit is for the quantitative measurement of amino acids, acylcarnitines, argininosuccinic acid, succinylacetone, lysophospholipid and nucleoside in blood samples dried on filter paper as a primary test for screening of babies for metabolic disorders.
What are the hazard statements for NeoMass AAAC 3.0?
This substance has 6 hazard statements:
- H225: Highly flammable liquid and vapor
- H301: Toxic if swallowed
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled
- H311 + H331: Toxic in contact with skin or if inhaled
- H319: Causes serious eye irritation
- H370: Causes damage to organs
What is the melting point of NeoMass AAAC 3.0?
The melting point is Acetonitrile -45°C / Methanol -94°C and the boiling point is Acetonitrile 82°C / Methanol 65°C.