Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- THALLIUM STANDARD 5mg/L 1L.
- Product Code
- 0841-DA
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Chemical for industrial and laboratory use.
Uses advised against
Not suitable for domestic use.
Manufacturers & Suppliers
Vickers Laboratories Ltd
manufacturer
Grangefield Industrial Estate, Richardshaw Road, Pudsey, West Yorkshire, LS28 6QW, UNITED KINGDOM
44 0113 2362811
http://www.viclabs.co.uk
Emergency Contacts
Emergency Contact
+44(0) 113 2362811
08:00-16:30
Emergency Contact
112
24hr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Thallium Standard 1000ppm | --- | 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure.
Wash off skin thoroughly with water.
Irrigate thoroughly with plenty of water for at least 10 minutes, holding the eye open.
Wash out the patients mouth thoroughly with water.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Consider what other flammable materials are present and act accordingly.
Nothing specified.
Presents no specific fire danger.
Consider all other materials in the vicinity.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wash area down with copious amounts of water.
Wash area down with copious amounts of water.
Presents no major environmental hazard.
Related Products
Similar products with comparable safety profiles
10,000 μg/mL Thallium in 4% HNO₃
---
Tantalum ICP Standard Solution 10000 mg/l Ta
---
Tantalum ICP Standard Solution 10000 mg/l Ta
---
CHLORIDE METER Mg26S STANDARD 100mmol/l Cl
---
CHLORIDE METER M926S STANDARD 100mmol/l Cl
---
Thallium(I) sulfate
CAS: 7446-18-6
GOLD STANDARD 4g/l 1L
---
Copper standard 1000 mg Cu, (CuCl₂ in H₂O) Titrisol®
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No specific precautions.
Well ventilated, cool, dry storage.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use nitrile gloves or PVC gauntlets.
No specific hazard through eye contact although the wearing of safety glasses is advised.
Presents no significant inhalation health hazard.
If skin contact or contamination of clothing is likely, protective clothing must be worn.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
No data available.
No data available.
No specific conditions.
No specific materials to avoid.
None unusual.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No specific environmental hazard.
12.2 Persistence and degradability
No data available.
12.3 Bioaccumulative potential
No data available.
12.4 Mobility in soil
12.5 Results of PBT & vPvB assessment
Assessment not required.
12.6 Other adverse effects
None known at present.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Flush to drain.
Flush to drain.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Not classified as hazardous under Classification, Labelling & Packaging of Substances & Mixtures Regulations (1272/2008/CE).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for THALLIUM STANDARD 5mg/L 1L.?
The signal word is no signal word.
What is the physical form of THALLIUM STANDARD 5mg/L 1L.?
THALLIUM STANDARD 5mg/L 1L. is a liquid appearing as clear colourless liquid. with colourless color. It has no specific odour. odor.
What is THALLIUM STANDARD 5mg/L 1L. used for?
Chemical for industrial and laboratory use.
What is the melting point of THALLIUM STANDARD 5mg/L 1L.?
The melting point is 0 °C and the boiling point is 100 °C.