Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CHLORIDE METER M926S STANDARD 100mmol/l Cl
- Product Code
- 00156202
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Chemical for industrial and laboratory use.
Uses advised against
Not suitable for domestic use.
Manufacturers & Suppliers
Sherwood Scientific Ltd
manufacturer
1 The Paddocks, Cherry Hinton Road, Cambridge, CB1 8DH, UNITED KINGDOM
+44(0)1223 243444
Emergency Contacts
Emergency Contact
01223 243444
08:00-16:30
Emergency Contact
112
24hr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No hazardous components.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure.
Wash off skin thoroughly with water.
Irrigate thoroughly with plenty of water for at least 10 minutes, holding the eye open.
Wash out the patient’s mouth thoroughly with water.
Immediate Medical Attention
If discomfort persists OBTAIN MEDICAL ATTENTION.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Consider what other flammable materials are present and act accordingly.
Nothing specified.
Presents no specific fire danger.
Consider all other materials in the vicinity.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wash area down with copious amounts of water.
Wash area down with copious amounts of water.
Presents no major environmental hazard.
Related Products
Similar products with comparable safety profiles
CHLORIDE METER Mg26S STANDARD 100mmol/l Cl
---
CHLORIDE ISE STANDARD
---
CHLORIDE ANALYSER BUFFER
---
CHLORIDE ANALYSER BUFFER
---
SODIUM CHLORIDE
CAS: 7647-14-5
SODIUM CHLORIDE
---
1440049 Sodium Chloride standard solution
---
Sodium Chloride Standard Solution, 491 ± 2.5 mg/L
CAS: Not applicable
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No specific precautions.
Well ventilated, cool, dry storage.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use nitrile gloves or PVC gauntlets.
Use chemical splash proof glasses or goggles.
Presents no significant inhalation health hazard.
If skin contact or contamination of clothing is likely, protective clothing must be worn.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
No data available.
No data available.
No specific conditions.
No specific materials to avoid.
None.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No specific environmental hazard. Toxicity data for algae, crustacea, and fish are not available.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No data available.
12.4 Mobility in soil
12.5 Results of PBT & vPvB assessment
Assessment not required.
12.6 Other adverse effects
None known at present.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Flush to drain.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CHLORIDE METER M926S STANDARD 100mmol/l Cl?
The signal word is no signal word.
What is the physical form of CHLORIDE METER M926S STANDARD 100mmol/l Cl?
CHLORIDE METER M926S STANDARD 100mmol/l Cl is a liquid appearing as clear colourless liquid. with colourless color. It has no specific odour. odor.
What is CHLORIDE METER M926S STANDARD 100mmol/l Cl used for?
Chemical for industrial and laboratory use.
What is the melting point of CHLORIDE METER M926S STANDARD 100mmol/l Cl?
The melting point is Not applicable and the boiling point is Aqueous solution.