Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GelRed® Nucleic Acid Gel Stain 10,000X in DMSO
- Product Code
- 41002
- Synonyms
- 41002: GelRed Nucleic Acid Stain, 10,000X in DMSO, 0.5 mL, 41002-1: GelRed Nucleic Acid Stain, 10,000X in DMSO, 10 mL
Regulatory Identifiers
- CAS Number
- 67-68-5 Check regulations →
- EC Number
- 200-664-3 Check regulations →
Identified Uses
Use as laboratory reagent. For research use only. Not for food, drug, household, or cosmetic use. Restricted to professional users.
Uses advised against
None known.
Manufacturers & Suppliers
Biotium, Inc.
manufacturer
46117 Landing Parkway, CA 94538 Fremont, USA
+1 510-265-1027
http://www.biotium.com
Emergency Contacts
Anti-poison center
+32 (0) 70 245 245
every day, 24 hours a day
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Does not contain any substances required to report
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of discomfort: bring the person into fresh air.
Upon irritation: rinse with water. In the event of continued irritation, seek medical assistance.
Symptoms: irritation
Rinse gently with lukewarm water. Remove any contact lenses if this is easy to do. Continue rinsing. In case of persistent eye irritation or discomfort: Seek medical help.
Symptoms: persistent eye irritation or discomfort
Rinse and flush mouth thoroughly and consume large quantities of water. In case of continued discomfort: seek medical assistance and bring this safety data sheet.
Symptoms: continued discomfort
Immediate Medical Attention
Contact a doctor if in doubt about the injured person's condition or if the symptoms persist.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water mist.
Waterjets should not be used, since they can spread the fire.
Fire will result in dense smoke. Exposure to combustion products may harm your health. Closed containers, which are exposed to fire, should be cooled with water.
Closed containers, which are exposed to fire, should be cooled with water.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact. Fire fighters should wear appropriate personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contaminated areas may be slippery.
Avoid discharge to lakes, streams, sewers, etc. Keep unauthorized persons away from the spill
cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Related Products
Similar products with comparable safety profiles
GelRed® Nucleic Acid Gel Stain 10,000X in DMSO
CAS: 67-68-5
GelRed Nucleic Acid Stain, 10,000X in water
---
GelRed Nucleic Acid Stain, 10,000X in water
---
RedSafe Nucleic Acid Staining Solution
---
DNF-910 dsDNA Gel 35-1500bp
---
Agarose gel loading dye (6X) glycerol based, Xylene Cyanol FF free
---
Gel Loading Dye, Purple (6X)
---
NucleoSpin Gel and PCR Clean-up (50)
UFI: N5XV-533V-Y202-95TW
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact during pregnancy and while nursing. Smoking, drinking and consumption of food is not allowed in the work area. See section 8 "Exposure controls/personal protection" for information on personal protection.
Keep container tightly closed in a dry and well-ventilated place. Room Temperature (20°C to 30°C). Protect from light.
Smoking, drinking and consumption of food is not allowed in the work area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Apply standard precautions during use of the product. Avoid inhalation of vapours.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Not required; except in case of aerosol formation.
No specific requirements.
No specific requirements.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in section 7 "Handling and storage".
No data available.
None known.
Do not expose to any forms of heat (e.g. solar radiation). May lead to excess pressure. Heat, flames and sparks.
No specific requirements
The product is not degraded when used as specified in section 1.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
No data available.
12.2. Persistence and degradability
Based on available data, the classification criteria are not met.
12.3. Bioaccumulative potential
Based on available data, the classification criteria are not met.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The mixture/product does not contain any substances known to fulfil the criteria for PBT and vPvB classification.
12.6. Endocrine disrupting properties
The mixture does not contain any substances considered to have endocrine-disrupting properties in relation to the environment.
12.7. Other adverse effects
No other adverse effects are known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Product is not covered by regulations on dangerous waste.
Product is not covered by regulations on dangerous waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labor Law of 24-01-1985, updated 31-12-2020.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is GelRed® Nucleic Acid Gel Stain 10,000X in DMSO known by?
GelRed® Nucleic Acid Gel Stain 10,000X in DMSO is also known as: 41002: GelRed Nucleic Acid Stain, 10,000X in DMSO, 0.5 mL, 41002-1: GelRed Nucleic Acid Stain, 10,000X in DMSO, 10 mL
What is the hazard signal word for GelRed® Nucleic Acid Gel Stain 10,000X in DMSO?
The signal word is no signal word.
What is the physical form of GelRed® Nucleic Acid Gel Stain 10,000X in DMSO?
GelRed® Nucleic Acid Gel Stain 10,000X in DMSO is a liquid with no data available color. It has no data available odor.
What is GelRed® Nucleic Acid Gel Stain 10,000X in DMSO used for?
Use as laboratory reagent. For research use only. Not for food, drug, household, or cosmetic use. Restricted to professional users.
What is the melting point of GelRed® Nucleic Acid Gel Stain 10,000X in DMSO?
The melting point is No data available and the boiling point is No data available.