NextSDS Logo
Safety Data Sheet EN

Aerospray® Hematology Pro Reagent B, Thiazin Stain

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Aerospray® Hematology Pro Reagent B, Thiazin Stain
Product Form
Mixture
Product Code
SS-071B, SS-071B-EU, SS-171B2

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hematology Pro staining reagent

Uses advised against

No additional information available

Manufacturers & Suppliers

ELITechGroup Inc. logo

ELITechGroup Inc.

manufacturer

370 West 1700 South, US– 84321 Logan, UT – Cache, USA

+1 (435) 752-6011

http://www.elitechgroup.com

Emergency Contacts

InfoTrac Emergency Response

1-800-535-5053

InfoTrac Emergency Response

+1 352-323-3500

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3 H226
Acute Tox. Cat. 3 H301
Acute Tox. Cat. 3 H311
Repr. Cat. 1B H360
STOT SE Cat. 1 H370

GHS Pictograms

GHS02 - Flammable

GHS02

GHS06 - Acute toxicity

GHS06

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapour.
H301 + H311 Toxic if swallowed or in contact with skin.
H360 May damage fertility or the unborn child.
H370 Causes damage to organs (liver, kidneys, central nervous system, optic nerve) (in contact with skin, oral).

Precautionary Statements

P210 Keep away from heat, hot surfaces, open flames, sparks. – No smoking.
P233 Keep container tightly closed.
P243 Take precautionary measures against static discharge.
P260 Do not breathe mist, spray, vapours.
P264 Wash hands thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, protective clothing, eye protection, face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P361 + P364 Take off immediately all contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use media other than water for extinction.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
methanol EC: 200-659-6 67-56-1 30 - 70% Yes
1H-imidazole EC: 206-019-2 288-32-4 1% Yes
hydrogen chloride EC: 231-595-7 7647-01-0 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Skin contact

Wash with water and soap. Rinse skin with water/shower. Take off immediately all contaminated clothing.

Symptoms: Repeated exposure to this material can result in absorption through skin causing significant health hazard.

Eye contact

Remove contact lenses, if present and easy to do. Continue rinsing. Rinse cautiously with water for several minutes.

Symptoms: pain, blinking or redness

Ingestion

Rinse mouth. Obtain emergency medical attention. Immediately call a POISON CENTER/doctor. Specific treatment (see supplemental first aid instruction on this label). Call a physician immediately.

Symptoms: Swallowing a small quantity of this material will result in serious health hazard.

Immediate Medical Attention

Call a physician immediately. Obtain emergency medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

ABC powder. Alcohol-resistant foam. BC powder. Water spray. Dry powder. Foam. Carbon dioxide.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

Flammable liquid and vapour. May form flammable/explosive vapour-air mixture.

Instructions

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. No open flames, no sparks, and no smoking. Only qualified personnel equipped with suitable protective equipment may intervene. Do not breathe dust/fume/gas/mist/vapours/spray.

Environmental

Avoid release to the environment.

Cleanup methods

Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.

Materials: inert solids, such as clay or diatomaceous earth

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation of the work station. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. No open flames. No smoking. Take precautionary measures against static discharge. Use only non-sparking tools. Do not handle until all safety precautions have been read and understood. Obtain special instructions before use. Do not breathe dust/fume/gas/mist/vapours/spray. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Do not get in eyes, on skin, or on clothing.

Storage

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.

Hygiene

Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse. Always wash hands after handling the product.

Fire prevention

No open flames. No smoking. Take precautionary measures against static discharge. Use only non-sparking tools. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation of the work station.

Hands

Wear protective gloves. Suitable gloves should be tested to EN 374. The glove material has to be impermeable and resistant to the product/the substance/the preparation. As the product is a preparation of several substances, the resistance and penetration time/breakthrough time of the glove material cannot be calculated/observed in advance and, therefore, has to be checked prior to the application. The following are recommended: materials - natural latex or nitrile; thickness - 4 to 6 mils (0.1 mm - 0.15 mm); minimum breakthrough time - 60 minutes.

Eyes

Safety glasses

Respiratory

Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. [In case of inadequate ventilation] wear respiratory protection.

Skin/Body

Wear suitable protective clothing

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Blue
Colour Intensity
---
Form
---
Odor
Alcohol odour
Odor Threshold
Not available
Ph
≈ 6.8 (6.65 – 6.95)
Melting Point
Not applicable
Boiling Point
≥ 64 °C
Flash Point
≈ 25 (25 – 32.2) °C
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not available
Vapor Density
---
Relative Density
0.8885 (0.8835 – 0.8935)
Bulk Density
---
Density
---
Flammability
Flammable liquid and vapour.
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Not available
Partition Coefficient
Not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Not available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Flammable liquid and vapour. May form flammable/explosive vapour-air mixture.

Reactivity

Flammable liquid and vapour.

Hazardous reactions

Not established.

Avoid

Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. Avoid contact with hot surfaces. No flames, no sparks. Eliminate all sources of ignition.

Incompatible

Strong acids. Strong bases.

Decomposition

fume. Carbon monoxide. Carbon dioxide. May release flammable gases.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity

Ecology - general : The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment. Hazardous to the aquatic environment, short-term (acute) : Not classified Hazardous to the aquatic environment, long-term (chronic) : Not classified 1H-imidazole (288-32-4)

12.1. Toxicity

LC50 - Fish [1] 283.6 mg/l (48 h, Leuciscus idus, Static system, Fresh water, Experimental value, Nominal concentration) EC50 - Crustacea [1] 341.5 mg/l Test organisms (species): Daphnia magna EC50 72h - Algae [1] 133 mg/l Test organisms (species): Desmodesmus subspicatus (previous name: Scenedesmus subspicatus) ErC50 algae 133 mg/l (DIN 38412: German standard methods for the examination of water, waste water and sludge, 72 h, Desmodesmus subspicatus, Static system, Fresh water, Experimental value, Nominal concentration)

12.1. Toxicity

| LC50 - Fish [1] | 15400 mg/l (EPA 660/3 - 75/009, 96 h, Lepomis macrochirus, Flow-through system, Fresh water, Experimental value, Lethal) | | --- | --- | | EC50 - Crustacea [1] | 18260 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 96 h, Daphnia magna, Semi-static system, Fresh water, Experimental value, Locomotor effect) | | EC50 96h - Algae [1] | 22000 mg/l (OECD 201: Alga, Growth Inhibition Test, Pseudokirchneriella subcapitata, Static system, Fresh water, Experimental value, Growth rate) | | NOEC (chronic) | 208 mg/l Test organisms (species): Daphnia magna Duration: '21 d' |

12.1. Toxicity

| LC50 - Fish [1] | 282 mg/l (96 h, Gambusia affinis, Fresh water, Literature study) |

12.2. Persistence and degradability

Aerospray® Hematology Pro Reagent B, Thiazin Stain | Not established.

Not established.

12.2. Persistence and degradability

Readily biodegradable in the soil. Readily biodegradable in water.

Readily biodegradable in the soil and water.

12.2. Persistence and degradability

Readily biodegradable in the soil. Readily biodegradable in water. Biochemical oxygen demand (BOD) | 0.6 – 1.12 g O₂/g substance Chemical oxygen demand (COD) | 1.42 g O₂/g substance ThOD | 1.5 g O₂/g substance

12.3. Bioaccumulative potential

Aerospray® Hematology Pro Reagent B, Thiazin Stain Bioaccumulative potential: Not established.

Not established.

12.3. Bioaccumulative potential

| 1H-imidazole (288-32-4) | | | Partition coefficient n-octanol/water (Log Pow) | -0.02 (Weight of evidence approach, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask Method, 25 °C) | | Bioaccumulative potential | Not bioaccumulative. |

12.3. Bioaccumulative potential

methanol (67-56-1) BCF - Fish [1] | 1 – 4.5 (72 h, Cyprinus carpio, Static system, Fresh water, Experimental value) Partition coefficient n-octanol/water (Log Pow) | -0.77 (Experimental value) Bioaccumulative potential | Low potential for bioaccumulation (BCF < 500).

Low potential for bioaccumulation (BCF < 500).

12.3. Bioaccumulative potential

Partition coefficient n-octanol/water (Log Pow) 0.25 (QSAR) Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).

12.4. Mobility in soil

1H-imidazole (288-32-4) Surface tension: No data available in the literature Organic Carbon Normalized Adsorption Coefficient (Log Koc): 1.36 – 2.32 (log Koc, Calculated value) Ecology - soil: Low potential for adsorption in soil. methanol (67-56-1) Surface tension: No data available in the literature Organic Carbon Normalized Adsorption Coefficient (Log Koc): -0.89 – -0.21 (log Koc, Calculated value) Ecology - soil: Highly mobile in soil.

12.5. Results of PBT and vPvB assessment

1H-imidazole (288-32-4): This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIII. This substance/mixture does not meet the vPvB criteria of REACH regulation, annex XIII. methanol (67-56-1): This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIII. This substance/mixture does not meet the vPvB criteria of REACH regulation, annex XIII. hydrogen chloride (7647-01-0): This substance/mixture does not meet the vPvB criteria of REACH regulation, annex XIII.

All listed components (1H-imidazole, methanol, and hydrogen chloride) do not meet the PBT or vPvB criteria of REACH regulation, annex XIII.

12.6. Endocrine disrupting properties

No additional information available

No additional information available

12.7. Other adverse effects

Avoid release to the environment.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of contents/container in accordance with licensed collector's sorting instructions.

Disposal

Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1992
Shipping Name
FLAMMABLE LIQUID, TOXIC, N.O.S. (Methanol)
Transport Class
3 (6.1)
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Aerospray® Hematology Pro Reagent B, Thiazin Stain?

The signal word is danger.

What is the physical form of Aerospray® Hematology Pro Reagent B, Thiazin Stain?

Aerospray® Hematology Pro Reagent B, Thiazin Stain is a liquid with blue color. It has alcohol odour odor.

What is the solubility of Aerospray® Hematology Pro Reagent B, Thiazin Stain?

Not available

What is Aerospray® Hematology Pro Reagent B, Thiazin Stain used for?

Hematology Pro staining reagent

What are the hazard statements for Aerospray® Hematology Pro Reagent B, Thiazin Stain?

This substance has 4 hazard statements:

  • H226: Flammable liquid and vapour.
  • H301 + H311: Toxic if swallowed or in contact with skin.
  • H360: May damage fertility or the unborn child.
  • H370: Causes damage to organs (liver, kidneys, central nervous system, optic nerve) (in contact with skin, oral).

What is the melting point of Aerospray® Hematology Pro Reagent B, Thiazin Stain?

The melting point is Not applicable and the boiling point is ≥ 64 °C.