Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aerospray® Gram Reagent A, Decolorizer with Acetone and Fuchsin
- Product Form
- Mixture
- Product Code
- SS-041AAF-EU or SS-141AF diluted with 2-propanol and acetone
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemical Dyestuff
Manufacturers & Suppliers
ELITechGroup Inc.
manufacturer
370 West 1700 South US– 84321 Logan, UT – Cache USA
+1 (435) 752-6011
http://www.elitechgroup.com
Emergency Contacts
InfoTrac Emergency Response
1-800-535-5053
InfoTrac Emergency Response
+1 352-323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
Symptoms: May cause drowsiness or dizziness.
Rinse skin with water/shower. Take off immediately all contaminated clothing.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If eye irritation persists: Get medical advice/attention.
Symptoms: Causes serious eye irritation. Eye irritation.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center or a doctor if you feel unwell.
Immediate Medical Attention
Obtain emergency medical attention. If eye irritation persists: Get medical advice/attention. IF exposed or concerned: Get medical advice/attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC powder. Alcohol-resistant foam. BC powder. Water spray. Dry powder. Foam. Carbon dioxide.
Do not use a heavy water stream.
Highly flammable liquid and vapour. May form flammable/explosive vapour-air mixture.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. No open flames, no sparks, and no smoking. Only qualified personnel equipped with suitable protective equipment may intervene. Avoid breathing dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: absorbent material, inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Aerospray® TB Reagent A, Carbol Fuchsin Decolorizer
---
Aerospray® Gram Reagent C, Crystal Violet
---
Aerospray® TB Reagent A, Fluorescence Decolorizer
---
Aerospray® TB Reagent A, Fluorescence Decolorizer Concentrate
---
Aerospray® TB Reagent A, Fluorescence Decolorizer Concentrate
---
Aersopray® Gram Reagent B, Iodine
---
Aerospray® Hematology Pro Reagent B, Thiazin Stain
---
Aerospray® TB Reagent C, Auramine O
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. No open flames. No smoking. Use only non-sparking tools. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Take all necessary technical measures to avoid or minimize the release of the product on the workplace. Limit quantities of product at the minimum necessary for handling and limit the number of exposed workers. Avoid contact with skin and eyes.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Separate working clothes from town clothes. Launder separately. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
No open flames. No smoking. Use only non-sparking tools. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Ground/bond container and receiving equipment. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Wear protective gloves. Suitable gloves should be tested to EN 374. The glove material has to be impermeable and resistant to the product/the substance/the preparation. As the product is a preparation of several substances, the resistance and penetration time/breakthrough time of the glove material cannot be calculated/observed in advance and, therefore, has to be checked prior to the application. The following are recommended: materials - natural latex or nitrile; thickness - 4 to 6 mils (0.1 mm - 0.15 mm); minimum breakthrough time - 60 minutes.
Chemical goggles or safety glasses. Safety glasses
Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. [In case of inadequate ventilation] wear respiratory protection.
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Highly flammable liquid and vapour. May form flammable/explosive vapour-air mixture.
Highly flammable liquid and vapour.
Not established.
Direct sunlight. Extremely high or low temperatures. Open flame. Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.
Strong acids. Strong bases.
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment.
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
Not established.
12.2. Persistence and degradability
The substance is readily biodegradable in both soil and water.
12.2. Persistence and degradability
Not readily biodegradable in water.
12.2. Persistence and degradability
The substance is readily biodegradable in water and biodegradable in soil under both aerobic and anaerobic conditions.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
Not established.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
Not bioaccumulative.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
Low potential for bioaccumulation (BCF < 500).
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
All listed components (1H-imidazole, C.I. Basic Red 9, 2-propanol, and acetone) do not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S. (Isopropanol, acetone)
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aerospray® Gram Reagent A, Decolorizer with Acetone and Fuchsin?
The signal word is danger.
What is the physical form of Aerospray® Gram Reagent A, Decolorizer with Acetone and Fuchsin?
Aerospray® Gram Reagent A, Decolorizer with Acetone and Fuchsin is a liquid with red color. It has characteristic odor.
What is the solubility of Aerospray® Gram Reagent A, Decolorizer with Acetone and Fuchsin?
Water: Not applicable
What is Aerospray® Gram Reagent A, Decolorizer with Acetone and Fuchsin used for?
Laboratory chemical Dyestuff
What are the hazard statements for Aerospray® Gram Reagent A, Decolorizer with Acetone and Fuchsin?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H350: May cause cancer (if inhaled, if swallowed).
What is the melting point of Aerospray® Gram Reagent A, Decolorizer with Acetone and Fuchsin?
The melting point is Not applicable and the boiling point is ≈ 70 (56 – 82) °C.