Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Potassium chloride for analysis EMSURE®
- Product Code
- 1.04936, 104936
- Chemical Name
- Potassium chloride
Regulatory Identifiers
- CAS Number
- 7447-40-7 Check regulations →
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck Life Science Pty Ltd
national supplier
Ground Floor, Building 1, 885 Mountain Highway, BAYSWATER VIC 3153, AUSTRALIA
+61 1800 800 097
Emergency Contacts
Emergency Contact
1800 862 115
CHEMTREC
+61 2 9037 2994
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Potassium chloride | 7447-40-7 | --- | No |
No hazardous ingredients
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most).
Immediate Medical Attention
Consult doctor if feeling unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours.
Suppress (knock down) gases/vapours/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up dry. Dispose of properly. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Potassium chloride for analysis EMSURE®
CAS: 7447-40-7
Potassium chloride for analysis EMSURE®
CAS: 7447-40-7
Potassium perchlorate for analysis EMSURE® ACS
CAS: 7778-74-7
Potassium dichromate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7778-50-9
Potassium dihydrogen phosphate for analysis EMSURE® ISO
CAS: 7778-77-0
Potassium dihydrogen phosphate for analysis EMSURE® ISO
CAS: 7778-77-0
Sodium chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7647-14-5
Sodium chloride for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7647-14-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Dry. Tightly closed.
Change contaminated clothing. Wash hands after working with substance.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No data available
Material : Nitrile rubber, Break through time : 480 min, Glove thickness : 0.11 mm, Protective index : Full contact, Manufacturer : KCL 741 Dermatril® L; Material : Nitrile rubber, Break through time : 480 min, Glove thickness : 0.11 mm, Protective index : Splash contact, Manufacturer : KCL 741 Dermatril® L
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter : Filter type P1. Type: The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
No data available
No data available
no information available
No data available
In the event of fire: see section 5 products
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
No data available
Endocrine disrupting properties
No data available
Other adverse effects
No data available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste material must be disposed of in accordance with the national and local regulations.
Leave chemicals in original containers. No mixing with other waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Therapeutic Goods (Poisons Standard) Instrument: No poison schedule number allocated. There is no applicable prohibition, authorisation and restricted use requirements, including for carcinogens referred to in Schedule 10 of the model WHS Act and Regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Potassium chloride for analysis EMSURE®?
The signal word is no signal word.
What is the physical form of Potassium chloride for analysis EMSURE®?
Potassium chloride for analysis EMSURE® is a solid appearing as crystalline, powder with white color. It has odourless odor.
What is the solubility of Potassium chloride for analysis EMSURE®?
4.0 g/l (Solvent: Ethanol)
What is Potassium chloride for analysis EMSURE® used for?
Reagent for analysis
What is the melting point of Potassium chloride for analysis EMSURE®?
The melting point is 770 °C and the boiling point is 1,413 °C (1,013 hPa).