Uni-Gold HIV Wash Solution

If inhaled and if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Give oxygen or artificial respiration if necessary. If experiencing respiratory symptoms: Call a poison center or a doctor.

Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.

Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.

Symptoms: Causes skin irritation. Redness. Itching. Swelling. May cause an allergic skin reaction. Skin rash/inflammation.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Symptoms: Causes serious eye irritation. Redness. Itching. Lacrimation. Blurred vision.

Rinse mouth out with water. Do NOT induce vomiting unless directed to do so by medical personnel. Call a POISON CENTER/doctor if you feel unwell.

Symptoms: May cause gastrointestinal irritation, nausea, vomiting and diarrhoea.

Dry chemical, CO2, or water spray or regular foam. Use extinguishing agent suitable for surrounding fire.

Do not use a heavy water stream.

Presents no particular fire or explosion hazard. Burning produces stinking and toxic fumes.

Evacuate the danger area. Exercise caution when fighting any chemical fire. Use extinguishing media appropriate for surrounding fire. Use water spray or fog for cooling exposed containers. Prevent fire fighting water from entering the environment.

Avoid all contact with skin, eyes, or clothing. Do not inhale vapour. Evacuate unnecessary personnel. Ventilate spillage area. Do not breathe vapours. Avoid contact with skin and eyes. Do not touch or walk on the spilled product. No action shall be taken without appropriate training or involving any personal risk. Stop leak if safe to do so. Ventilate area. Do not touch spilled material.

Avoid release to the environment.

Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Clean contaminated surfaces with an excess of water.

Materials: inert solids, such as clay or diatomaceous earth

Provide good ventilation in process area to prevent formation of vapour. Ensure good ventilation of the work station. Do not breathe vapours, mist. Wear personal protective equipment. Do not get in eyes, on skin, or on clothing.

Keep away from food, drink and animal feedingstuffs. Keep only in the original container in a cool, well ventilated place away from : Direct sunlight, Incompatible materials. Keep container tightly closed. Store away from other materials.

Handle in accordance with good industrial hygiene and safety procedures. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product. Always wash hands after handling the product. Wash contaminated clothing before reuse.

Ensure good ventilation of the work station. Handle in accordance with good industrial hygiene and safety procedures. Avoid all unnecessary exposure. Ensure exposure is below occupational exposure limits (where available).

Wear suitable gloves resistant to chemical penetration. Recommended materials. Polyvinylchloride (PVC). Nitrile rubber. Natural rubber. ISO 374-1. Since the product consists of several substances, the durability of the glove material cannot be estimated and needs to be tested before use. Please follow the instructions related to the permeability and the penetration time provided by the manufacturer

Chemical goggles or safety glasses. ISO 16321-1

No respiratory protection needed under normal use conditions. Where excessive vapour, mist, or dust may result, use approved respiratory protection equipment

Wear suitable protective clothing

Avoid release to the environment.

Stable under normal conditions.

The product is non-reactive under normal conditions of use, storage and transport.

No dangerous reactions known. Hazardous polymerisation: Will not occur.

Direct sunlight. Heat. Extremely high or low temperatures.

Strong bases. Strong acids. Strong oxidizing agents. Strong reducing agents.

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Dispose of contents/container in accordance with licensed collector's sorting instructions.