Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LODYNE SILICON DIOXIDE ETCHANT 10:1
- Product Code
- UPC076
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Raw material for laboratory and industrial use.
Manufacturers & Suppliers
KMG Ultra Pure Chemicals Ltd
manufacturer
Amber Business Centre, Riddings, Alfreton, Derbyshire, DE55 4DA, United Kingdom
+44 (0) 1773 844200
Emergency Contacts
Emergency Contact
+44 (0) 1235 239670
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| AMMONIUM FLUORIDE EC: 235-185-9 | 12125-01-8 | 30 - 50% | Yes |
| HYDROFLUORIC ACID EC: 231-634-8 | 7664-39-3 | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty from exposure ensuring one's own safety whilst doing so. If unconscious and breathing is OK, place in the recovery position. If conscious, ensure the casualty sits or lies down. If breathing becomes bubbly, have the casualty sit and provide oxygen if available. Transfer to hospital as soon as possible.
Symptoms: There may be shortness of breath with a burning sensation in the throat. Exposure may cause coughing or wheezing.
Remove all contaminated clothes and footwear immediately unless stuck to skin. Drench the affected skin with running water for 10 minutes or longer if substance is still on skin. Transfer to hospital if there are burns or symptoms of poisoning.
Symptoms: Blistering may occur. Progressive ulceration will occur if treatment is not immediate.
Bathe the eye with running water for 15 minutes. Transfer to hospital for specialist examination.
Symptoms: Corneal burns may occur. May cause permanent damage.
Wash out mouth with water. Do not induce vomiting. Give 1 cup of water to drink every 10 minutes. If unconscious, check for breathing and apply artificial respiration if necessary. If unconscious and breathing is OK, place in the recovery position. Transfer to hospital as soon as possible.
Symptoms: Corrosive burns may appear around the lips. Blood may be vomited. There may be bleeding from the mouth or nose.
Immediate Medical Attention
Transfer to hospital if there are burns or symptoms of poisoning. Transfer to hospital for specialist examination. Transfer to hospital as soon as possible.
Medical Treatment
Not applicable
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Suitable extinguishing media for the surrounding fire should be used.
Corrosive. In combustion emits toxic fumes. Toxic.
Use water spray to cool containers.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Notify the police and fire brigade immediately. If outside keep bystanders upwind and away from danger point. Mark out the contaminated area with signs and prevent access to unauthorised personnel. Do not attempt to take action without suitable protective clothing - see section 8 of SDS. Turn leaking containers leak-side up to prevent the escape of liquid.
Do not discharge into drains or rivers. Contain the spillage using bunding. Alert the neighbourhood to the presence of fumes or gas.
Clean-up should be dealt with only by qualified personnel familiar with the specific substance. Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Related Products
Similar products with comparable safety profiles
SILICON DIOXIDE 99.999%
CAS: 14464-46-1
DISSOLVANT SILICONE
---
SODIUM HYDROXIDE, 50%
---
SODIUM HYDROXIDE SOLUTION > 20%
---
BONDERITE M-ED ACID ETCH 2701
---
CAUSTIC SODA LYE 10-50% W/W
---
CAUSTIC SODA LYE 10-50% W/W
UFI: P092-R0KQ-500J-VKG0
SODIUM SILICATE, MOLAR RATIO 1,6 – 2,6
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid direct contact with the substance. Do not handle in a confined space.
Store in a cool, well ventilated area. Keep container tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure there is sufficient ventilation of the area.
Impermeable gloves.
Tightly fitting safety goggles. Ensure eye bath is to hand.
Self-contained breathing apparatus must be available in case of emergency.
Impermeable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below.
Heat. Hot surfaces. Flames.
Strong oxidising agents. Strong acids.
In combustion emits toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
This product is not identified as a PBT/vPvB substance.
12.6. Other adverse effects
Negligible ecotoxicity.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transfer to a suitable container and arrange for collection by specialised disposal company.
Transfer to a suitable container and arrange for collection by specialised disposal company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2922
- Shipping Name
- CORROSIVE LIQUID, TOXIC, N.O.S.
- Transport Class
- 8 (6.1)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Specific regulations: Not applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LODYNE SILICON DIOXIDE ETCHANT 10:1?
The signal word is danger.
What is the physical form of LODYNE SILICON DIOXIDE ETCHANT 10:1?
LODYNE SILICON DIOXIDE ETCHANT 10:1 is a liquid with colourless color. It has barely perceptible odour odor.
What is LODYNE SILICON DIOXIDE ETCHANT 10:1 used for?
Raw material for laboratory and industrial use.
What are the hazard statements for LODYNE SILICON DIOXIDE ETCHANT 10:1?
This substance has 3 hazard statements:
- H301 + H331: Toxic if swallowed or if inhaled.
- H310: Fatal in contact with skin.
- H314: Causes severe skin burns and eye damage.