Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SIGMACOVER 480 BASE (LEADFREE)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
coating
Manufacturers & Suppliers
PPG Coatings SPRL/BVBA
manufacturer
Noordersingel 23, B-2040 Borgerhout
+32 3 3606470
Emergency Contacts
Emergency Contact
+31 20 4075210
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Producer declares that for R-phrases not mentioned in chapters 3, the entire amount of hazardous substances is below limits. For components with an occupational threshold limit value see chapter 8.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| xylene EC: 215-535-7 | 1330-20-7 | 2.5 - 10% | Yes |
| Solvent naphtha (petroleum), heavy arom EC: 265-198-5 | 64742-94-5 | 2.5 - 10% | Yes |
| 1,2,4-trimethylbenzene EC: 202-436-9 | 95-63-6 | 0.1 - 1% | Yes |
| Naphthalene EC: 202-049-5 | 91-20-3 | 0.25 - 1% | Yes |
| reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700 < MW < 1000) | 25068-38-6 | 10 - 25% | Yes |
Notes
If multiple components with identical identifiers appear, these have different hazardous properties, e.g. flashpoint.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration. If unconscious place in recovery position and seek medical advice.
Take off all contaminated clothing immediately. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.
Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. Remove contact lenses. Seek medical advice.
If accidentally swallowed obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.
Immediate Medical Attention
If accidentally swallowed obtain immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Keep containers and surroundings cool with water spray.
Do NOT use water jet.
As the product contains combustible organic components, fire will produce dense black smoke containing hazardous products of combustion (see section 10). Exposure to decomposition products may be a hazard to health.
Cool closed containers exposed to fire with water spray.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Ventilate the area. Refer to protective measures listed in sections 7 and 8. Wear respiratory protection. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Remove all sources of ignition.
Try to prevent the material from entering drains or water ways. If the product contaminates rivers and lakes or drains inform respective authorities.
Clean with detergents. Avoid solvents. Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13).
Materials: detergents, non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid exceeding of the given occupational exposure limits (see section 8). Avoid contact with skin, eyes and clothing. Smoking, eating and drinking should be prohibited in the application area. Avoid inhalation of vapour or mist.
Smoking, eating and drinking should be prohibited in the application area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Keep away from oxidising agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.
Avoid temperatures above 60°C (140 F), direct sunlight and contact with sources of heat.
oxidising agents, strongly alkaline and strongly acid materials
In case of fire hazardous decomposition products may be produced such as: Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen (NOx), dense black smoke.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product should not be allowed to enter drains, water courses or the soil. Disposal together with normal waste is not allowed. Special disposal required according to local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is classified and labelled in accordance with Directive 1999/45/EC.
Hazardous components which must be listed on the label: reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700 < MW < 1000). Further information: HS (G) 178, Spraying of Flammable Liquids, HSE., HS (G) 176, Storage of Flammable Liquids in Tanks, HSE., HS (G) 51, Storage of Flammable Liquid in Containers, HSE., HS (G) 37, An introduction to Local Exhaust Ventilation, HSE., Health and Safety at Work etc Act, 1974, and relevant Statutory Provisions., Environmental Protection Act, 1990 and associated legislation., The Special Waste Regulations, 1996 and amendments., The Chemicals (Hazard Information and Packaging for Supply) Regulations, 1994 and amendments., EH 40, Occupational Exposure Limits, HSE. Revised annually., HS(G) 53, Respiratory Protective Equipment - A Practical Guide for Users, HSE., HS(G) 97, A Step by Step guide to COSHH Regulations, HSE., EH 173, Monitoring Strategies for Toxic Substances, HSE.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SIGMACOVER 480 BASE (LEADFREE)?
The signal word is na: r-phrases.
What is the physical form of SIGMACOVER 480 BASE (LEADFREE)?
SIGMACOVER 480 BASE (LEADFREE) is a viscous with various color. It has mild amine-like odor.
What is SIGMACOVER 480 BASE (LEADFREE) used for?
coating