NextSDS Logo
Safety Data Sheet EN

SIGMACOVER 256 BASE (LEAD FREE)

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SIGMACOVER 256 BASE (LEAD FREE)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

coating

Manufacturers & Suppliers

P

PPG Coatings SPRL/BVBA

manufacturer

Noordersingel 23, B-2040 Borgerhout

+32 3 3606470

Emergency Contacts

Emergency Contact

+31 20 4075210

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

GHS Pictograms

Precautionary Statements

P101 Contains epoxy constituents. See information supplied by the manufacturer.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Producer declares that for R-phrases not mentioned in chapters 3, the entire amount of hazardous substances is below limits. For components with an occupational threshold limit value see chapter 8.

Chemical Name CAS Number Concentration Hazardous
xylene EC: 215-535-7 1330-20-7 10 - 12.5% Yes
iso-butanol EC: 201-148-0 78-83-1 1 - 2.5% Yes
ethylbenzene EC: 202-849-4 100-41-4 2.5 - 10% Yes
reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecularweight ≤ 700) 25068-38-6 5 - 10% Yes
1-methoxy-2-propanol EC: 203-539-1 107-98-2 1 - 2.5% Yes
Trizinc bis(orthophosphate) EC: 231-944-3 7779-90-0 2.5 - 10% Yes
nonylphenol EC: 246-672-0 25154-52-3 1 - 2.5% Yes

Notes

If multiple components with identical identifiers appear, these have different hazardous properties, e.g. flashpoint.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Keep patient warm and at rest. If breathing is irregular or stopped, administer artificial respiration. If unconscious place in recovery position and seek medical advice.

Skin contact

Take off all contaminated clothing immediately. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.

Eye contact

Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. Remove contact lenses. Seek medical advice.

Ingestion

If accidentally swallowed obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.

Immediate Medical Attention

If accidentally swallowed obtain immediate medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Keep containers and surroundings cool with water spray.

Unsuitable media

Do NOT use water jet.

Specific hazards

As the product contains combustible organic components, fire will produce dense black smoke containing hazardous products of combustion (see section 10). Exposure to decomposition products may be a hazard to health.

Instructions

Cool closed containers exposed to fire with water spray.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Ventilate the area. Refer to protective measures listed in sections 7 and 8. Wear respiratory protection. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Remove all sources of ignition.

Environmental

Try to prevent the material from entering drains or water ways. If the product contaminates rivers and lakes or drains inform respective authorities.

Cleanup methods

Clean with detergents. Avoid solvents. Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13).

Materials: detergents, sand, earth, diatomaceous earth, vermiculite

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid exceeding of the given occupational exposure limits (see section 8). Use only in area provided with appropriate exhaust ventilation. Avoid contact with skin, eyes and clothing. Smoking, eating and drinking should be prohibited in the application area. Avoid inhalation of vapour or mist.

Storage

Store between 5 and 30°C (41 - 86 F) in a dry, well ventilated place away from sources of heat, ignition and direct sunlight.

Hygiene

Smoking, eating and drinking should be prohibited in the application area.

Fire prevention

Isolate from sources of heat, sparks and open flame. Take necessary action to avoid static electricity discharge. The product should only be used in areas from which all naked lights and other sources of ignition have been excluded. No smoking. The accumulation of contaminated rags and dry overspray, particularly in spray booth filters, may result in spontaneous combustion.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
viscous
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
---
Colour Intensity
---
Form
viscous
Odor
characteristic
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
26.8 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1.5 g/cm3 at 20 °C
Flammability
---
Upper Explosive Limit
7.9 %(V) 335.25 g/m3
Lower Explosive Limit
1.08 %(V) 45.67 g/m3
Explosive Limits
---
Auto Ignition Temperature
> 290 °C
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
immiscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
2,750 mPa.s at 23 °C
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Hazardous reactions

Keep away from oxidising agents, strongly alkaline and strongly acid materials in order to avoid exothermic reactions.

Avoid

Avoid temperatures above 60°C (140 F), direct sunlight and contact with sources of heat.

Incompatible

oxidising agents, strongly alkaline and strongly acid materials

Decomposition

Carbon dioxide (CO2), carbon monoxide (CO), oxides of nitrogen (NOx), dense black smoke.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

The product should not be allowed to enter drains, water courses or the soil. Disposal together with normal waste is not allowed. Special disposal required according to local regulations.

Waste Codes

08 01 11 Waste paint and varnish containing organic solvents or other dangerous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
PAINT
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The product is classified and labelled in accordance with Directive 1999/45/EC. This Safety Data Sheet is prepared in accordance with Annex II to Regulation (EC) No. 1907/2006.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SIGMACOVER 256 BASE (LEAD FREE)?

The signal word is na: r-phrases.

What is the physical form of SIGMACOVER 256 BASE (LEAD FREE)?

SIGMACOVER 256 BASE (LEAD FREE) is a viscous . It has characteristic odor.

What is SIGMACOVER 256 BASE (LEAD FREE) used for?

coating