MOLYKOTE(R) 1000 SPRAY

Remove to fresh air. Obtain medical attention immediately.

Symptoms: Vapours may cause drowsiness and dizziness.

Flush with water.

Flush with water.

Obtain medical attention.

On large fires use dry chemical, foam or water spray (fog). On small fires use carbon dioxide (CO2), dry chemical or water spray. Water can be used to cool fire exposed containers.

None known.

Pressurised container capable of exploding if heated. Toxic vapours are evolved.

Use water spray to keep fire exposed containers cool.

Determine the need to evacuate or isolate the area according to your local emergency plan.

Do not empty into drains. Prevent from spreading or entering into drains, ditches or rivers by using sand, earth or other appropriate barriers.

Do not breathe spray or mist. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - no smoking. Do not breathe vapour. Avoid skin and eye contact.

Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Store in a flameproof, well ventilated area. Storage temperature: maximum 50 °C

Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - no smoking.

Ventilation : Refer to Section 7.1

Chemical protective gloves should be worn: Nitrile rubber. 4H(TM). Polyvinyl alcohol(PVA). Viton(TM). Regarding glove's breakthrough time, contact your chemical protective glove supplier.

Safety goggles should be worn.

A suitable respirator must be worn if the product is used in any circumstances where an aerosol or mist may be generated, such as during spraying or similar activities. Suitable respiratory protection should be worn if the product is used in large quantities, confined spaces or in other circumstances where the OEL may be approached or exceeded. Depending on the working conditions, wear a respiratory mask with filter(s) AXP or use a self-contained respirator. The choice of a filter type depends on the amount and type of chemical being handled in the workplace. Regarding filter characteristics, contact your respiratory protection supplier.

Wear impervious overalls in circumstances where significant skin contact can occur.

Refer to section 6 and 12.

Stable under normal usage conditions.

None known.

None known.

Eliminate all possible sources of ignition.

Can react with strong oxidising agents.

Thermal breakdown of this product during fire or very high heat conditions may evolve the following decomposition products: Silica. Carbon oxides and traces of incompletely burned carbon compounds. Formaldehyde. Nitrogen products. Sulphur products. Toxic vapours of fluorinated compounds.

Dispose of in accordance with local regulations.