Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride
- Product Code
- E7750
Regulatory Identifiers
- CAS Number
- 25952-53-8 Check regulations →
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
Sigma-Aldrich Chemie GmbH
manufacturer
Eschenstrasse 5, D-82024 TAUFKIRCHEN
+49 (0)89 6513-1130
Emergency Contacts
CHEMTREC Deutschland
0800 181 7059
CHEMTREC weltweit
+49 (0)696 43508409
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
GHS08
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-(3-(Dimethylamino)propyl)-3-ethyl-carbodiimide hydrochloride EC: 247-361-2 | 25952-53-8 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air. Call in physician.
Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.
Rinse out with plenty of water. Remove contact lenses.
Immediately make victim drink water (two glasses at most). Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Foam, Carbon dioxide (CO2), Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.
Suppress (knock down) gases/vapors/mists with a water spray jet.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid generation and inhalation of dusts in all circumstances. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up carefully. Clean up affected area.
Related Products
Similar products with comparable safety profiles
N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride
CAS: 25952-53-8
1-(3-Dimethylaminopropyl)-3-ethylcarbodiimide, polymer-bound
---
N,N,N',N'-Tetrakis(2-Hydroxypropyl)ethylene diamine
CAS: 102-60-3
N,N-Dimethyl-1,3-propanediamine
---
N-(Hydroxymethyl)acrylamide
---
N,N'-(1,2-Dihydroxyethylene)bis-acrylamide
---
N-(1,3-Dimethylbutyl)-N'-phenyl-1,4-phenylenediamine
---
N,N-Dimethylacetamide
CAS: 127-19-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Tightly closed. Dry. Keep in a well-ventilated place. Keep locked up or in an area accessible only to qualified or authorized persons.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P3. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
In contact with nitrites, nitrates, nitrous acid possible liberation of nitrosamines! Violent reactions possible with: Oxidizing agents, Acid anhydrides, acid halides, acids
no information available
nitrites, nitrates, nitrous acid, Oxidizing agents, Acid anhydrides, acid halides, acids
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
12.7 Other adverse effects
No data available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2811
- Shipping Name
- TOXIC SOLID, ORGANIC, N.O.S. (1-(3-(Dimethylamino)propyl)-3-ethylcarbodiimide hydrochloride)
- Transport Class
- 6.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride?
The signal word is danger.
What is the physical form of N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride?
N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride is a powder with white, to, off-white color. It has no data available odor.
What is N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride?
This substance has 6 hazard statements:
- H302: Harmful if swallowed.
- H311: Toxic in contact with skin.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H373: May cause damage to organs (Stomach, large intestine, lymph node) through prolonged or repeated exposure if swallowed.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of N-(3-Dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride?
The melting point is Melting point/range: 110 - 115 °C .