Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- N-(Hydroxymethyl)acrylamide
- Product Code
- 10853
- Chemical Name
- N-(Hydroxymethyl)acrylamide
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Johnson Matthey Catalog Company Inc.
manufacturer
30 Bond Street, Ward Hill, Massachusetts, 01835-8099
Emergency Contacts
Johnson Matthey Catalog Company Inc.
(978) 521-6300
CHEMTREC
(800) 424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N-(Hydroxymethyl)acrylamide | 924-42-5 | --- | No |
Notes
Minor Impurities: Not determined
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing is difficult give oxygen and seek medical attention.
Remove contaminated clothing. Wash affected area with soap and water. Rinse thoroughly. If irritation persists or other symptoms are observed, seek medical advice.
Flush with copious amounts of water for at least 15 minutes. If irritation persists, seek medical attention.
Rinse out mouth and drink lots of water. Seek medical attention and show physician the container details.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use carbon dioxide or dry powder. Use fire fighting measures which suit the environment and take into account other materials which may be involved.
In general, water-based extinguishers should not be used for fires involving organic materials.
Use fire fighting measures which suit the environment and take into account other materials which may be involved.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unprotected persons away.
Take precautions to ensure product does not contaminate the ground or enter the drainage system.
Mix with vermiculite or proprietary absorbent material and transfer to sealed containers for disposal.
Materials: vermiculite or proprietary absorbent material
Related Products
Similar products with comparable safety profiles
N-(Hydroxymethyl)acrylamide solution
---
N-Hydroxyethyl acrylamide
CAS: 7646-67-5
N,N'-(1,2-Dihydroxyethylene)bis-acrylamide
---
Acrylamide
CAS: 79-06-1
Methyl 3-(dimethylamino)acrylate
CAS: 999-59-7
Hydroxypropyl acrylate
CAS: 999-61-1
2-Hydroxyethyl acrylate
CAS: 818-61-1
2-(Dimethylamino)ethyl methacrylate
CAS: 2867-47-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Chemicals should be used only by those trained in handling potentially hazardous materials. Rubber gloves, eye protection and protective clothing should be worn.
Store in tightly sealed containers in a cool place. Protect from moisture. Material is sensitive to light.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle in an efficient fume hood or equivalent system.
Wear rubber gloves.
Wear safety spectacles, goggles or, for larger quantities, a full face mask.
Avoid inhalation of product.
Wear protective clothing and, for larger quantities, full arm, body and face protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Strong oxidising agents.
carbon monoxide, carbon dioxide, oxides of nitrogen, nitric acid, hydrogen cyanide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal should be via an approved contractor and should take full account of local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2810
- Transport Class
- 6.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Toxic by inhalation, in contact with skin and if swallowed. Irritating to eyes, respiratory system and skin. May cause cancer.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for N-(Hydroxymethyl)acrylamide?
The signal word is na: r-phrases.
What is the physical form of N-(Hydroxymethyl)acrylamide?
N-(Hydroxymethyl)acrylamide is a colorless liquid appearing as colorless liquid with colorless color.
What is the solubility of N-(Hydroxymethyl)acrylamide?
Water solubility
What is the melting point of N-(Hydroxymethyl)acrylamide?
The melting point is 75-76° .