NextSDS Logo
Safety Data Sheet EN

N,N'-(1,2-Dihydroxyethylene)bis-acrylamide

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
N,N'-(1,2-Dihydroxyethylene)bis-acrylamide
Product Code
SC-215503

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For research use only.

Uses advised against

Not intended for diagnostic or therapeutic use.

Manufacturers & Suppliers

S

Santa Cruz Biotechnology, Inc.

national supplier

10410 Finnell Street Dallas, TX 75220

831.457.3800

Emergency Contacts

Chemtrec

1.800.424.9300

Chemtrec

+1.703.527.3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox.
Acute Tox.
Acute Tox.
Skin Corr.
Eye Dam.
STOT SE

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed
H312 Harmful in contact with skin
H315 Causes skin irritation
H319 Causes serious eye irritation
H332 Harmful if inhaled
H335 May cause respiratory irritation

Precautionary Statements

Wash face, hands and any exposed skin thoroughly after handling
Do not eat, drink or smoke when using this product
Wear protective gloves/protective clothing/eye protection/face protection
Avoid breathing dust/fume/gas/mist/vapors/spray
Use only outdoors or in a well-ventilated area
IF exposed or concerned: Get medical advice/attention
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
If eye irritation persists: Get medical advice/attention
IF ON SKIN: Wash with plenty of soap and water
Call a POISON CENTER or doctor/physician if you feel unwell
If skin irritation occurs: Get medical advice/attention
Take off contaminated clothing and wash before reuse
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
Call a POISON CENTER or doctor/physician if you feel unwell
IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell
Rinse mouth
Store in a well-ventilated place. Keep container tightly closed
Store locked up
Dispose of contents/container to an approved waste disposal plant

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
N,N'-(1,2-Dihydroxyethylene) bis-acrylamide 868-63-3 98% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air If breathing is difficult, give oxygen If not breathing, give artificial respiration

Skin contact

Wash skin with soap and water.

Ingestion

Never give anything by mouth to an unconscious person. Clean mouth with water.

Immediate Medical Attention

Treat symptomatically.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Unsuitable media

None.

Specific hazards

No information available.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

See Section 12 for additional Ecological Information.

Cleanup methods

Use personal protective equipment as required. Take up mechanically, placing in appropriate containers for disposal. Avoid creating dust. Clean contaminated surface thoroughly.

Related Substances

Similar chemicals with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Store at 4 °C.

Hygiene

Handle in accordance with good industrial hygiene and safety practice.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

ShowersEyewash stationsVentilation systems

Hands

Wear protective gloves

Eyes

Wear safety glasses with side shields (or goggles).

Respiratory

If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection must be provided in accordance with current local regulations.

Skin/Body

Wear protective clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Upper Explosive Limit
No information available
Decomposition Temperature
No information available
Vapor Density
No information available
Relative Evaporation Rate
---
Physical State
Solid
Colour Intensity
---
Freezing Point
---
State Under Standard Conditions
---
Solubility In Fat
---
Solubility
---
Lower Explosive Limit
No information available
Cloud Point
---
Partition Coefficient
No information available
Solubility In Water
No information available
Explosive Limits
---
Boiling Point
No information available
Metal Corrosion
---
Flash Point
No information available
Ph
No information available
Properties Status
---
Form
---
Voc Content
---
Solidification Point
---
Vapor Pressure
No information available
Density
No information available
Bulk Density
---
Molecular Weight
---
Auto Ignition Temperature
No information available
Odor Threshold
---
Evaporation Rate
No information available
Crystallisation Point
---
Relative Density
No information available
Kinematic Viscosity
---
Physical State Data
solid
Colour
---
Softening Point
---
Odor
No information available
Appearance
No information available
Flammability
---
Dynamic Viscosity
---
Melting Point
156 °C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

Not applicable

Hazardous reactions

None under normal processing. Hazardous polymerization: No information available.

Avoid

Extremes of temperature and direct sunlight.

Incompatible

Strong oxidizing agents.

Decomposition

Carbon oxides. Nitrogen oxides (NOx).

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for N,N'-(1,2-Dihydroxyethylene)bis-acrylamide?

The signal word is warning.

What is the physical form of N,N'-(1,2-Dihydroxyethylene)bis-acrylamide?

N,N'-(1,2-Dihydroxyethylene)bis-acrylamide is a solid appearing as no information available . It has no information available odor.

What is N,N'-(1,2-Dihydroxyethylene)bis-acrylamide used for?

For research use only.

What are the hazard statements for N,N'-(1,2-Dihydroxyethylene)bis-acrylamide?

This substance has 6 hazard statements:

  • H302: Harmful if swallowed
  • H312: Harmful in contact with skin
  • H315: Causes skin irritation
  • H319: Causes serious eye irritation
  • H332: Harmful if inhaled
  • H335: May cause respiratory irritation

What is the melting point of N,N'-(1,2-Dihydroxyethylene)bis-acrylamide?

The melting point is 156 °C and the boiling point is No information available.

Compliance Scan

Free compliance check