Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Cargille Immersion Oil Type LDF, Cargille Immersion Oil Type 37LDF
- Product Code
- 16241, 16240
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
This SDS or an accurate copy is an integral part of using Immersion Oil Type LDF & 37 LDF. Only use Immersion Oil Type LDF & 37 LDF if the SDS is present. Conditions prevailing in this document, unless otherwise noted: Temperature = 23°C(73°F), Pressure = 1013.25 hPa (760 mm Hg) For Professional and R&D use only. Conditions of Intended Use: (ABBR. C.I.U.) As a Microscope Immersion Oil at normal room pressure 101.32 kPa (760 mm Hg), temperature 7°C to 40°C (45°F to 104°F) in a non misted / non airborne state in a room having normal air changes (2) / HR., in a trained and supervised laboratory / industrial setting using standard Good Laboratory/Good Manufacturing procedures. Note: Product normally sold in ¼ oz (7.4cc), 1 oz (30cc), 4 oz (120cc), 16 oz (480cc), and gallon (3.84L) quantities. Used in single drop to a few cubic centimeters per application. See requisitioner for specific quantities involved.
Uses advised against
Contact manufacturer/supplier
Manufacturers & Suppliers
Cargille Laboratories
manufacturer
55 Commerce Road, Cedar Grove, NJ 07009-1289 USA
973-239-6633
http://www.cargille.com
Emergency Contacts
ChemTel Inc.
(800)255-3924
ChemTel Inc.
+1 (813)248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Trade Secret | --- | 40 - 60% | Yes |
| Trade Secret | --- | 20 - 40% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air.
Symptoms: Irritant to mucous membranes.
Immediately wash with water and soap and rinse thoroughly.
Symptoms: Irritant to skin.
Remove contact lenses if worn. Rinse opened eye for several minutes under running water.
Rinse out mouth and then drink plenty of water. Do not induce vomiting.
Symptoms: Gastric or intestinal disorders.
Immediate Medical Attention
Consult doctor in case of complaints (inhalation). If skin irritation continues, consult a doctor. If symptoms persist, consult a doctor (eye). Immediately call for medical help (swallowing).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Fire-extinguishing powder, Gaseous extinguishing agents, Carbon dioxide, Water fog / haze
Water stream, Water spray
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Send for recovery or disposal in suitable receptacles.
Related Products
Similar products with comparable safety profiles
Cargille Immersion Oil Type A / Cargille Immersion Oil Type B
---
Cargille Immersion Oil Type A, Cargille Immersion Oil Type B
---
Cargille Immersion Oil Type A / Type B
---
Cargille Immersion Oil
---
Immersion Oil, 150 CS
---
Immersion oil RAL
---
Immersion oil for microscopy
UFI: 0F32-R681-M99E-WTFA
LOCTITE LB 8711 PENETRATING OIL known as Penetrating Oil
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid splashes or spray in enclosed areas. Avoid contact with the eyes and skin.
Store in a well-ventilated place. Keep cool. Keep containers tightly sealed.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No relevant information available.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Safety glasses. Follow relevant national guidelines concerning the use of protective eyewear.
Not required under normal conditions of use.
Protective work clothing
No relevant information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperatures and pressures.
No relevant information available.
Can form explosive mixtures in air if heated above flash point and/or when sprayed or atomized.
No decomposition if used and stored according to specifications.
Strong oxidizing agents, strong acids and alkali, certain metals.
No decomposition if used and stored according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
No relevant information available regarding aquatic toxicity.
Persistence and degradability
Bioaccumulative potential
Mobility in soil
Results of PBT and vPvB assessment
Endocrine disrupting properties
Other adverse effects
Persistence and degradability
The substance is described as moderately or partly biodegradable.
Bioaccumulative potential
No relevant information available.
Mobility in soil
Results of PBT and vPvB assessment
The substance does not meet the criteria for PBT or vPvB.
Other adverse effects
No relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and nonhazardous wastes.
The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and nonhazardous wastes.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Cargille Immersion Oil Type LDF, Cargille Immersion Oil Type 37LDF?
The signal word is warning.
What is the physical form of Cargille Immersion Oil Type LDF, Cargille Immersion Oil Type 37LDF?
Cargille Immersion Oil Type LDF, Cargille Immersion Oil Type 37LDF is a liquid appearing as colorless, light yellow with colorless, light yellow color. It has slight, characteristic odor.
What is Cargille Immersion Oil Type LDF, Cargille Immersion Oil Type 37LDF used for?
This SDS or an accurate copy is an integral part of using Immersion Oil Type LDF & 37 LDF. Only use Immersion Oil Type LDF & 37 LDF if the SDS is present. Conditions prevailing in this document, unless otherwise noted: Temperature = 23°C(73°F), Pressure = 1013.25 hPa (760 mm Hg) For Professional and R&D use only. Conditions of Intended Use: (ABBR. C.I.U.) As a Microscope Immersion Oil at normal room pressure 101.32 kPa (760 mm Hg), temperature 7°C to 40°C (45°F to 104°F) in a non misted / non airborne state in a room having normal air changes (2) / HR., in a trained and supervised laboratory / industrial setting using standard Good Laboratory/Good Manufacturing procedures. Note: Product normally sold in ¼ oz (7.4cc), 1 oz (30cc), 4 oz (120cc), 16 oz (480cc), and gallon (3.84L) quantities. Used in single drop to a few cubic centimeters per application. See requisitioner for specific quantities involved.
What are the hazard statements for Cargille Immersion Oil Type LDF, Cargille Immersion Oil Type 37LDF?
This substance has 1 hazard statement:
- H315: Causes skin irritation.
What is the melting point of Cargille Immersion Oil Type LDF, Cargille Immersion Oil Type 37LDF?
The melting point is <-16 °C (<3 °F) and the boiling point is >279 °C (>534 °F).