NextSDS Logo
Safety Data Sheet EN

Trichloro(1H,1H,2H,2H-perfluorooctyl)silane

CAS 78560-45-9

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Trichloro(1H,1H,2H,2H-perfluorooctyl)silane
Product Code
448931

Regulatory Identifiers

CAS Number
78560-45-9 Check regulations →

Identified Uses

Laboratory chemicals, Synthesis of substances

Uses advised against

The product is being supplied under the TSCA R&D Exemption (40 CFR Section 720.36). It is the recipient's responsibility to comply with the requirements of the R&D exemption. The product may not be used for a non-exempt commercial purpose under TSCA unless appropriate consent is granted in writing by MilliporeSigma.

Manufacturers & Suppliers

S

Sigma-Aldrich Inc.

manufacturer

3050 SPRUCE ST, ST. LOUIS MO 63103, UNITED STATES

+1 314 771-5765

Emergency Contacts

CHEMTREC

800-424-9300

24 Hours/day; 7 Days/week

CHEMTREC

+1-703-527-3887

24 Hours/day; 7 Days/week

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 4 H227
Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H227 Combustible liquid.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P210 Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/ doctor.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/ doctor.
P363 Wash contaminated clothing before reuse.
P370 + P378 In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/ container to an approved waste disposal plant.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Trichloro(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl)silane EC: 278-947-6 78560-45-9 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

The data for this section has not been processed yet.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Specific hazards

Combustible.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

No data available

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

For precautions see section 2.2.

Storage

No data available

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Full contact: Material: Viton®, Minimum layer thickness: 0.7 mm, Break through time: 480 min, Material tested: Vitoject® (KCL 890 / Aldrich Z677698, Size M). Splash contact: Material: Chloroprene, Minimum layer thickness: 0.6 mm, Break through time: 10 min, Material tested: Camapren® (KCL 722 / Aldrich Z677493, Size M). This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Environmental

Prevent product from entering drains.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
clear, liquid
Colour
colorless
Colour Intensity
---
Form
clear, liquid
Odor
No data available
Odor Threshold
No data available
Ph
No data available
Melting Point
No data available
Boiling Point
192 °C 378 °F - lit.
Flash Point
87 °C (189 °F) - closed cup
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
No data available
Vapor Density
No data available
Relative Density
No data available
Bulk Density
---
Density
1.3 g/cm3 at 25 °C (77 °F) - lit.
Flammability
No data available
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
No data available
Partition Coefficient
No data available
Solubility In Water
No data available
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
No data available
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No data available

Reactivity

Reacts violently with water.

Hazardous reactions

No data available

Avoid

No data available

Incompatible

Water, Strong oxidizing agents, Alcohols, acids, Bases

Decomposition

In the event of fire: see section 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

No data available

12.2 Persistence and degradability

No data available

12.3 Bioaccumulative potential

No data available

12.4 Mobility in soil

No data available

12.5 Results of PBT and vPvB assessment

PBT/vPvB assessment not available as chemical safety assessment not required/not conducted

PBT/vPvB assessment not available as chemical safety assessment not required/not conducted

12.6 Endocrine disrupting properties

No data available

12.7 Other adverse effects

No data available
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

No data available

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2987
Shipping Name
Chlorosilanes, corrosive, n.o.s.
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Trichloro(1H,1H,2H,2H-perfluorooctyl)silane?

The signal word is danger.

What is the physical form of Trichloro(1H,1H,2H,2H-perfluorooctyl)silane?

Trichloro(1H,1H,2H,2H-perfluorooctyl)silane is a liquid appearing as clear, liquid with colorless color. It has no data available odor.

What is the solubility of Trichloro(1H,1H,2H,2H-perfluorooctyl)silane?

No data available

What is Trichloro(1H,1H,2H,2H-perfluorooctyl)silane used for?

Laboratory chemicals, Synthesis of substances

What are the hazard statements for Trichloro(1H,1H,2H,2H-perfluorooctyl)silane?

This substance has 2 hazard statements:

  • H227: Combustible liquid.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Trichloro(1H,1H,2H,2H-perfluorooctyl)silane?

The melting point is No data available and the boiling point is 192 °C 378 °F - lit..