Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TotalSource Acrylic fast dry high coverage coating spray
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Prefilled spray
Manufacturers & Suppliers
TVH Parts NV
manufacturer
Brabantstraat 15 8790 Waregem Belgium
+32 56 43 64 36
http://www.tvh.com
Emergency Contacts
Emergency Contact
+32 56 43 64 36
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethyl ether EC: 204-065-8 | 115-10-6 | 25 - 50% | Yes |
| acetone EC: 200-662-2 | 67-64-1 | 10 - 20% | Yes |
| Ethyl acetate EC: 205-500-4 | 141-78-6 | 10 - 25% | Yes |
| n-Butyl acetate EC: 204-658-1 | 123-86-4 | 15% | Yes |
| 2-Methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to section 13.
Related Products
Similar products with comparable safety profiles
RAL Acrylic Spray
---
TotalSource Synthetic heavy-duty metallic coating
---
MOTIP RAL ACRYL SPRAY Clear Coat
---
AEROSOL 1K SB ACRYL TOPCOAT DOOSAN ORANGE
---
MINWAX® Fast-Drying Polyurethane Spray Clear Gloss
---
UV-topcoat/high-gloss
---
Construction Top Coat
---
TOTAL SOURCE PAINT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace.
Observe official regulations on storing packagings with pressurised containers. Do not seal receptacle gas tight. Keep container tightly sealed.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
Carbon monoxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Warning: Gases. Stowage Code: SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. Segregation Code: SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow 'separated from' class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TotalSource Acrylic fast dry high coverage coating spray?
The signal word is danger.
What is the physical form of TotalSource Acrylic fast dry high coverage coating spray?
TotalSource Acrylic fast dry high coverage coating spray is a aerosol with according to product specification color. It has characteristic odor.
What is TotalSource Acrylic fast dry high coverage coating spray used for?
Prefilled spray
What are the hazard statements for TotalSource Acrylic fast dry high coverage coating spray?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of TotalSource Acrylic fast dry high coverage coating spray?
The melting point is Undetermined. and the boiling point is -24.9 °C.