NextSDS Logo
Safety Data Sheet EN

MOLYKOTE® DX Paste

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOLYKOTE® DX Paste

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricants and lubricant additives

Manufacturers & Suppliers

S

SPECIALTY ELECTRONIC MATERIALS SWITZERLAND GMBH

manufacturer

GROSSMATTE 4, 6014 LUZERN, SWITZERLAND

00800-3876-6838

Emergency Contacts

Emergency Contact

+(41)- 435082011

24-Hour

Emergency Contact

+1 703-741-5970

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS09 - Environmental hazard

GHS09

Hazard Statements

H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P391 Collect spillage.
P501 Dispose of contents/ container to an approved waste disposal plant.
In case of fire: Avoid breathing fume.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Distillates (petroleum), hydrotreated heavy naphthenic EC: 265-155-0 64742-52-5 40 - 50% Yes
N-Tallow Alkyltrimethylenediamine Oleate EC: 263-186-4 61791-53-5 2.5 - 10% Yes
Petroleum Distillates, Hydrotreated, Heavy Paraffinic EC: 265-157-1 64742-54-7 1 - 10% Yes
Zinc Oxide EC: 215-222-5 1314-13-2 1 - 2.5% Yes
Solvent dewaxed heavy paraffinic distillates EC: 265-169-7 64742-65-0 1 - 10% No
Lithium 12-hydroxyoctadecanoate EC: 231-536-5 7620-77-1 1 - 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move person to fresh air; if effects occur, consult a physician.

Skin contact

Wash off with plenty of water.

Eye contact

Flush eyes thoroughly with water for several minutes. Remove contact lenses after the initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a physician, preferably an ophthalmologist.

Ingestion

No emergency medical treatment necessary.

Medical Treatment

No specific antidote. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Alcohol-resistant foam. Carbon dioxide (CO2). Dry chemical.

Unsuitable media

None known.

Specific hazards

Exposure to combustion products may be a hazard to health. Toxic vapours are evolved.

Instructions

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. Wear neoprene gloves to prevent contact with hydrofluoric acid.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Follow safe handling advice and personal protective equipment recommendations.

Small spill

Wipe up or scrape up and contain for salvage or disposal.

Large spill

For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, Sections 13 and 15 of this SDS provide information regarding certain local or national requirements.

Environmental

Do not release the product to the aquatic environment above defined regulatory levels. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water.

Cleanup methods

Wipe up or scrape up and contain for salvage or disposal.

—

Related Products

Similar products with comparable safety profiles

M

MOLYKOTE® G-N Plus Paste

---

M

MOLYKOTE® HTP Paste

---

M

MOLYKOTE™ HTP Paste

---

M

MOLYKOTE® G-Rapid Plus Paste

---

M

MOLYKOTE® G-Rapid Plus Paste

---

M

MOLYKOTE(R) CU-7439 PLUS PASTE

---

M

MOLYKOTE(R) CU-7439 PLUS PASTE

---

M

MOLYKOTE® CU-7439 Plus Paste V1

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not get on skin or clothing. Do not swallow. Avoid contact with eyes. Take care to prevent spills, waste and minimize release to the environment. Handle in accordance with good industrial hygiene and safety practice.

Storage

Keep in properly labelled containers. Store in accordance with the particular national regulations.

Hygiene

Handle in accordance with good industrial hygiene and safety practice.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
paste
Physical State Data
solid
State Under Standard Conditions
---
Appearance
paste
Colour
white
Colour Intensity
---
Form
---
Odor
slight
Odor Threshold
No data available
Ph
Not applicable
Melting Point
No data available
Boiling Point
Not applicable
Flash Point
closed cup >200 °C
Freezing Point
No data available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable
Vapor Pressure
Not applicable
Vapor Density
---
Relative Density
1.14
Bulk Density
---
Density
---
Flammability
Not classified as a flammability hazard
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
---
Partition Coefficient
No data available
Solubility In Water
No data available
Solubility In Fat
---
Molecular Weight
No data available
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not applicable
Kinematic Viscosity
Not applicable
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Not classified as a reactivity hazard.

Hazardous reactions

Can react with strong oxidizing agents.

Avoid

None known.

Incompatible

Oxidizing agents

Decomposition

Decomposition products can include and are not limited to: Hexafluoroethane. Hydrogen Fluoride. 1,1,1,3,3,3-Hexafluoro-2-propanone. Carbonic difluoride. Carbon monoxide. Fluorinated hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

## Distillates (petroleum), hydrotreated heavy naphthenic ### Acute toxicity to fish Material is not classified as dangerous to aquatic organisms (LC50/EC50/IC50/LL50/EL50 greater than 100 mg/L in most sensitive species). LL50. Pimephales promelas (fathead minnow). 96 Hour. > 100 mg/l. OECD Test Guideline 203 ### Acute toxicity to aquatic invertebrates EL50. Daphnia magna (Water flea). 48 Hour. > 10,000 mg/l ### Acute toxicity to algae/aquatic plants EL50. Pseudokirchneriella subcapitata (green algae). 72 Hour. > 100 mg/l. OECD Test Guideline 201 NOELR. Pseudokirchneriella subcapitata (green algae). 72 Hour. 100 mg/l. OECD Test Guideline 201 ### Toxicity to bacteria NOEC. 10 min. >= 1.93 mg/l ### Chronic toxicity to aquatic invertebrates NOELR. Daphnia magna (Water flea). 21 d. 10 mg/l

12.5 Results of PBT and vPvB assessment

No data available.

12.6 Endocrine disrupting properties

No data available.

12.1 Toxicity

Acute toxicity to fish: Material is highly toxic to aquatic organisms on an acute basis (LC50/EC50 between 0.1 and 1 mg/L in the most sensitive species tested). Material is very toxic to aquatic organisms (LC50/EC50/IC50 below 1 mg/L in the most sensitive species). Acute toxicity to aquatic invertebrates: Based on data from similar materials EC50. Daphnia magna (Water flea). 48 Hour. > 0.1 - 1 mg/l. Acute toxicity to algae/aquatic plants: Based on data from similar materials EC50. 72 Hour. > 0.01 - 0.1 mg/l. OECD Test Guideline 201. Based on data from similar materials NOEC. 72 Hour. > 0.01 - 0.1 mg/l. OECD Test Guideline 201. Chronic toxicity to aquatic invertebrates: Based on data from similar materials EC10. Daphnia (water flea). > 1 mg/l

The material is highly toxic to aquatic organisms on an acute basis.

12.1 Toxicity

Acute toxicity to fish: Typical for this family of materials. Material is not classified as dangerous to aquatic organisms (LC50/EC50/IC50/LL50/EL50 greater than 100 mg/L in most sensitive species). For this family of materials: LC50. Oncorhynchus mykiss (rainbow trout). semi-static test. 96 Hour. > 100 mg/l. Acute toxicity to aquatic invertebrates: For this family of materials: EC50. Daphnia magna (Water flea). semi-static test. 48 Hour. > 100 mg/l. Acute toxicity to algae/aquatic plants: NOELR. Pseudokirchneriella subcapitata (green algae). 72 Hour. >100. OECD Test Guideline 201. ErC50. Pseudokirchneriella subcapitata (green algae). 72 Hour. >100. OECD Test Guideline 201. Toxicity to bacteria: Based on data from similar materials. NOEC. 10 min. > 1.93 mg/l. DIN 38 412 Part 8. Chronic toxicity to aquatic invertebrates: NOEC. Daphnia magna (Water flea). semi-static test. 21 d. number of offspring. 10 mg/l

Material is not classified as dangerous to aquatic organisms (LC50/EC50/IC50/LL50/EL50 greater than 100 mg/L in most sensitive species).

Acute toxicity to fish

Material is very toxic to aquatic organisms (LC50/EC50/IC50 below 1 mg/L in the most sensitive species). LC50. Danio rerio (zebra fish). static test. 96 Hour. 1.55 mg/l ### Acute toxicity to aquatic invertebrates EC50. Daphnia magna (Water flea). 48 Hour. 0.481 mg/l ### Acute toxicity to algae/aquatic plants IC50. Pseudokirchneriella subcapitata (green algae). 72 Hour. Growth rate. 0.136 mg/l NOEC. Pseudokirchneriella subcapitata (green algae). 72 Hour. 0.024 mg/l ### Chronic toxicity to fish NOEC. Danio rerio (zebra fish). 32 d. mortality. >= 0.540 mg/l ### Chronic toxicity to aquatic invertebrates NOEC. Daphnia magna (Water flea). 21 d. number of offspring. 0.058 mg/l

12.1 Toxicity

Acute toxicity to fish Information given is based on data obtained from similar substances. LC50. Pimephales promelas (fathead minnow). > 100 mg/l. OECD Test Guideline 203 Acute toxicity to aquatic invertebrates Information given is based on data obtained from similar substances. LL50. Daphnia magna (Water flea). > 10,000 mg/l. OECD Test Guideline 202 Toxicity to bacteria Based on data from similar materials NOEC. 10 min. > 1.93 mg/l. DIN 38 412 Part 8 Chronic toxicity to fish NOEC. Oncorhynchus mykiss (rainbow trout). 14 d. >= 1,000 mg/l Chronic toxicity to aquatic invertebrates NOEC. Daphnia magna (Water flea). 21 d. 10 mg/l

12.1 Toxicity

Material is not classified as dangerous to aquatic organisms (LC50/EC50/IC50/LL50/EL50 greater than 100 mg/L in most sensitive species). LC50. Oncorhynchus mykiss (rainbow trout). semi-static test. 96 Hour. > 100 mg/l. OECD Test Guideline 203 EC50. Daphnia magna (Water flea). static test. 48 Hour. > 100 mg/l. OECD Test Guideline 202 EC50. Pseudokirchneriella subcapitata (green algae). static test. 72 Hour. Growth rate. > 160 mg/l. OECD Test Guideline 201

Material is not classified as dangerous to aquatic organisms (LC50/EC50/IC50/LL50/EL50 greater than 100 mg/L in most sensitive species).

12.2 Persistence and degradability

12.2 Persistence and degradability

Biodegradability: Material is expected to biodegrade very slowly (in the environment). Fails to pass OECD/EEC tests for ready biodegradability. 10-day Window: Fail Biodegradation: 31 % Exposure time: 28 d Method: OECD Test Guideline 301F

Toxicity

Not provided

Persistence and degradability

Biodegradability: Material is readily biodegradable. Passes OECD test(s) for ready biodegradability. Based on data from similar materials 10-day Window: Pass. Biodegradation: 65 %. Exposure time: 28 d. Method: OECD Test Guideline 301D

Bioaccumulative potential

Not provided

Mobility in soil

Not provided

Results of PBT and vPvB assessment

Not provided

Endocrine disrupting properties

Not provided

Other adverse effects

Not provided

12.2 Persistence and degradability

Biodegradability: For this family of materials: Based on stringent OECD test guidelines, this material cannot be considered as readily biodegradable; however, these results do not necessarily mean that the material is not biodegradable under environmental conditions. 10-day Window: Fail Biodegradation: 1.5 - 29 % Exposure time: 28 d Method: OECD Test Guideline 301B or Equivalent

12.2 Persistence and degradability

Biodegradability: Biodegradation is not applicable.

Biodegradation is not applicable.

12.2 Persistence and degradability

Biodegradability: Inherently biodegradable. Biodegradation: 31 % Exposure time: 28 d Method: OECD Test Guideline 301F

12.2 Persistence and degradability

Biodegradability: Material is readily biodegradable. Passes OECD test(s) for ready biodegradability. 10-day Window: Pass Biodegradation: 78 % Exposure time: 28 d Method: OECD Test Guideline 301C

12.3 Bioaccumulative potential

12.3 Bioaccumulative potential

Partition coefficient: n-octanol/water(log Pow): 1.99 - 18.02

Bioaccumulative potential

Bioaccumulation: No relevant data found.

No relevant data found.

12.1 Toxicity

No data available.

12.2 Persistence and degradability

No data available.

12.3 Bioaccumulative potential

Partition coefficient: n-octanol/water(log Pow): 1.99 - 18.02

12.4 Mobility in soil

No data available.

12.7 Other adverse effects

No data available.

Bioaccumulative potential

Partitioning from water to n-octanol is not applicable.

Bioaccumulative potential

Bioaccumulation is unlikely. Not applicable

Bioaccumulation is unlikely.

Bioaccumulative potential

Partition coefficient: n-octanol/water(log Pow): > 0.915 at 25 °C OECD Test Guideline 123

Mobility in soil

12.1 Toxicity

Not available.

12.2 Persistence and degradability

Not available.

12.3 Bioaccumulative potential

Not available.

12.4 Mobility in soil

Substance is very mobile in soil (Log Koc < 2).

12.5 Results of PBT and vPvB assessment

Not available.

12.6 Endocrine disrupting properties

Not available.

12.7 Other adverse effects

Not available.

Results of PBT and vPvB assessment

This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

The substance/mixture does not contain PBT or vPvB components at levels of 0.1% or higher.

Other adverse effects

Other adverse effects

This substance is not on the Montreal Protocol list of substances that deplete the ozone layer.

The substance is not on the Montreal Protocol list of substances that deplete the ozone layer.

12.1 Toxicity

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

This substance is not on the Montreal Protocol list of substances that deplete the ozone layer.

The substance is not listed on the Montreal Protocol for ozone-depleting substances.

12.7 Other adverse effects

This substance is not on the Montreal Protocol list of substances that deplete the ozone layer.

The substance is not listed as an ozone-depleting substance under the Montreal Protocol.

12.1 Toxicity

No data available.

12.2 Persistence and degradability

No data available.

12.3 Bioaccumulative potential

No data available.

12.4 Mobility in soil

No data available.

12.5 Results of PBT and vPvB assessment

No data available.

12.6 Endocrine disrupting properties

No data available.

12.7 Other adverse effects

This substance is not on the Montreal Protocol list of substances that deplete the ozone layer.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

This product, when being disposed of in its unused and uncontaminated state should be treated as a hazardous waste according to EC Directive 2008/98/EC.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.(N-Tallow Alkyltrimethylenediamine Oleate, Zinc oxide)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOLYKOTE® DX Paste?

The signal word is warning.

What is the physical form of MOLYKOTE® DX Paste?

MOLYKOTE® DX Paste is a paste appearing as paste with white color. It has slight odor.

What is MOLYKOTE® DX Paste used for?

Lubricants and lubricant additives

What are the hazard statements for MOLYKOTE® DX Paste?

This substance has 1 hazard statement:

  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of MOLYKOTE® DX Paste?

The melting point is No data available and the boiling point is Not applicable.