Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NEFA Standard FS
- Product Code
- 1 5780 XX XX XXX
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagent for in-vitro diagnostics in human samples For professional use only
Manufacturers & Suppliers
DiaSys Diagnostic Systems GmbH
manufacturer
Alte Strasse 9, 65558 Holzheim
+49 (0) 6432-9146-0
http://www.diasys.de
Emergency Contacts
Infraserv
+49 (0) 69-305-6418
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous solution of inorganic salts and organic compounds.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethoxylated secondary alcohols (C11-C15) EC: 614-295-4 | 68131-40-8 | 1% | Yes |
Contains Sodium azide (0.95 g/L) as preservative.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If you feel unwell, seek medical advice.
Take off contaminated clothing and wash it before reuse. Remove residues with water. In case of skin reactions, consult a physician.
Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently consult an ophthalmologist.
Symptoms: Causes serious eye irritation.
Rinse mouth thoroughly with water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. Have victim drink large quantities of water, with active charcoal if possible. Seek medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product is non-combustible. Extinguishing materials should therefore be selected according to surroundings.
Fires in the immediate vicinity may cause the development of dangerous vapours.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes. If possible, eliminate leakage. Avoid breathing vapours/spray.
Do not allow to penetrate into soil, waterbodies or drains.
Soak up with absorbent materials. Wash spill area with plenty of water.
Materials: sand, siliceus earth, acid- or universal binder
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid breathing vapours/spray. Wear appropriate protective equipment. Take off contaminated clothing and wash it before reuse. Do not eat, drink or smoke when using this product. Have eye wash bottle or eye rinse ready at work place.
Keep containers tightly closed and at a temperature between 2°C and 8°C. Do not freeze. Protect from light. Keep sterile.
Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Keep all containers, equipment and working place clean.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide good ventilation and/or an exhaust system in the work area.
Protective gloves according to EN 374. Glove material: Butyl caoutchouc (butyl rubber)-Breakthrough time: >480 min. Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Tightly sealed goggles according to EN 166.
Use a breathing protection against vapours/aerosol. Use combination filter type A/P according to EN 14387. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product.
Wear suitable protective clothing.
Refer to "6.2 Environmental precautions".
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Refer to subsection "Possibility of hazardous reactions".
No hazardous reactions known.
Protect from frost, heat and sunlight.
Strong acids and alkalis
No hazardous decomposition products when regulations for storage and handling are observed. Thermal decomposition: No data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Other adverse effects
Contains phosphates which may contribute to the eutrophication of water supplies. Prevent entry into ground-water, surface water, or drains.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste according to applicable legislation.
Special waste. Dispose of waste according to applicable legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for NEFA Standard FS?
The signal word is warning.
What is the physical form of NEFA Standard FS?
NEFA Standard FS is a liquid appearing as colourless, clear with colourless, clear color. It has no characteristic odour odor.
What is NEFA Standard FS used for?
Reagent for in-vitro diagnostics in human samples For professional use only
What are the hazard statements for NEFA Standard FS?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of NEFA Standard FS?
The melting point is No data available and the boiling point is No data available.